Question about Westinghouse LTV-27W2 27 in. HD-Ready LCD Television

Open Question

Tv will not work at all

Posted by mcfly_lives on Nov 08, 2008
the tv was working fine wednesday. i turned it off, went to bed. thursday night, it wouldnt turn on at all. i unplugged it, tried again. nothing. pushed and held the power button, light came on in the front, but still no pic or sound. called westing house, they said could be inverter circut, but wasnt much help other than that. called a few tv repair shops, nobody works on lcd tv's. Best buy said they send it back to the manufacturer and then tell me if its worth fixing. searched inverter circuts and found they are fairly cheap (15 bucks). how easy is it to change that out? if that is not the issue, what else can i check to fix it? Comment by mcfly_lives, posted on Nov 08, 2008 to update this problem.... its a 27 inch westinghouse. model number LTV-27w2. i found a site that has the inverter circuts plus other parts, i just dont have any clue as to which part it may be that needs replacing. best as i can figure there are three main boards or circuits that can go bad. the inverter circuit, the back light and the power supply.
since the purple light comes on, im guessing its not the power supply. i think the back light is for the screen not the sound. best guess would be the inverter circuit, but im not sure what the inverter circuit does..?

Posted by on

6 Suggested Answers

  • 317 Answers

SOURCE: Westinghouse lcd tv ltv-27w2 no picture or sound

power supply first one...second one input hdmi pcb defective..

Posted on Jun 03, 2008

  • 18 Answers

SOURCE: The TV doesn't turn on and it has a purple light.

MAIN BOARD IS BAD...THERE ARE TWO DIFFERENT MAIN BOARDS FOR THIS TV...IF S/N STARTS WITH W2702...USE P/N 5600110351...IF S/N STARTS WITH W2751...USE P/N 5600110493...PART CAN BE ORDERED FROM ANDREWS ELECTRONICS IN CALIFORNIA..YOU MAY CONSIDER TAKING THE SET TO A LOCAL REPAIR SHOP..

Posted on Jun 08, 2008

budmrtn
  • 11361 Answers

SOURCE: hi i have the westinghouse ltv-27w2 it has lines

T-CON board, check the connections between the T-CON and the Main LOGIC board first (very rarely to be the logic board but not 100% for sure). Make sure to get the number as printed on the board since there are more than one version. http://www.shopjimmy.com/catalogsearch/result/?q=Westinghouse+LTV-27W2+

Please see my basic troubleshooting guide:
http://s807.photobucket.com/home/budm/allalbums

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://en.wikipedia.org/wiki/Capacitor_plague
Parts: try www.shopjimmy.com or Ebay


Posted on Jun 25, 2010

  • 10 Answers

SOURCE: know where I can purchase a base (table stand) for

I got about 15 here let me know if you want to buy 1 call Tommy at 919-424-7807 JTKSINC@AOL.COM

Posted on Jul 02, 2010

budmrtn
  • 11361 Answers

SOURCE: We have a LTV-27W2 television

They are METRIC screws, either M5 or M6, but get M4 too jsut incase, you can get tehm at HD or Lowe's for about 35cents each so you can get different length to try out, more likely to be about 1/2".

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Posted on Sep 01, 2010

budmrtn
  • 11361 Answers

SOURCE: where is the reset button

There is no reset button, to reset it, unplug it for about an hour to let it reset itself.
Are you having problem with the set?

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Posted on Sep 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lg50pc1d purple screen


try to unplug the set for a period of time?

Mar 12, 2012 | LG Flat Panel Televisions

1 Answer

The tv shows it turned on the green light is on, but there is no picture, when we went to bed last night it was working and when we woke up to turn on this is what happened


First check all the cables make sure they are plugged in Second make sure the input is set to tv or whatever input goes to your cable box

Feb 28, 2011 | Maxent Flat Panel Televisions

1 Answer

Last night I was watching TV just fine. I turned off the TV when I went to bed and then tried to turn it back on this morning when I got up. It wont turn back on and I have checked to make sure that there...


Check ur power source?Tries tv unplug,replug the tv back like about an hour later.Now the tv are resetting it self back to the factory setting.The tv should work now.If still have the same problems,some how ur power supply board is causes and is not providing the tv the wright voltages anymore.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Dec 09, 2010 | Mitsubishi LT-40133 40 in. LCD HDTV

1 Answer

We had a thunder storm on Thursday lightning struck the dish and both t.v.s went off. my wife called dish they came and change everything,know mt t.v in the living room works has volume my t.v. in the bed...


. Make sure that you don't have mute on, and make sure your TV speakers are turn on. Go to menu and see if there is a way to turn your internal speakers on. If you can't fine anything , then your audio processor could be locked up, and if you unplug your TV for 30 MIN. it will reset the processor back to normal. Good luck and have a nice Day.

Oct 16, 2010 | Protron PLTV-37 37 in. LCD Television

1 Answer

TV worked fine one night, next day screen is white.


The LCD Panel failed. There is no easy fix but try to get the T-Con board to fix the issue. However, this part is usually only available with the whole LCD Panel. This is usually the most expensive part in the TV and the whole TV needs to be taken apart to replace the panel.

Might be economically viable if you can find a place that carrys the T-con but Dynex parts are usually hard to find. The LCD Panel part alone will exceed the cost of the TV.

Oct 07, 2009 | Dynex 32 in. LCD Flat-Panel HDTV

1 Answer

Samsung PS50C91HDX Sound but no picture


It sounds like the main board or screen may have gone

Sep 26, 2009 | Samsung 50 in. Plasma TV

1 Answer

Viewsonic problem


Have you checked the SCART leads?
Usually seems to be the cause of this kind of thing.

Nov 07, 2008 | Flat Panel Televisions

Not finding what you are looking for?
Westinghouse LTV-27W2 27 in. HD-Ready LCD Television Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Westinghouse Flat Panel Televisions Experts

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

68223 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Westinghouse Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...