Question about Hitachi 42EDT41 42 in. HD-Ready Plasma Television

2 Answers

Black Lines I have a line that goes down the center of my screen that is around 2 inches wide. I also have a line on the occasion that is in the left side of my TV.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

My Hitachi TV Flat screen 42 EDT 4 1A has a one inch black line from the top to the bottom of the
screen on the left side. What or how do I fix it. I did blow it out with a air compressor as suggested by a local repairman.

Posted on Nov 16, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi,I have one inch black line in horizantal center of screen.
Whould you please tell me what is the solution of it ?

Posted on Jan 19, 2012

2 Suggested Answers

  • 2 Answers

SOURCE: Polaroid 40 inch tv (TLX-04011C) Picture is

its the ribon cables from the lcd patern bords on top there is 2 of them normaly its the right side that goes bad but in your case its the left there is only 1 way to fix it

you have to replace the lcd screen panel with the 2 pattern bords on top

Posted on Nov 12, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How i adjust horizontal size and vertical size


To answer your concern, all you have to do is to change the setting of your aspect ratio on your TV.

Here is my suggested way to procede:


1. Apply 1080i signal, which should produce an oversized HD image on ColorStream1or 2.
2. Select an HD channel that is broadcasting standard 4:3 image, not wide screen.
3. Switch to the Service Mode ( Please refer to the above links). In the Service mode, press channel up/down to find the Adjustment parameters needed for the following steps.

4. Adjust HIT with volume up/down control for the image height to 22.5 inches.

6. Adjust WID for image width of 30 inches, (22.5*4/3)
7. Adjust HPOS to center the image.
8. Adjust PARA and TRAP to minimize geometric distortion.
9. Switch into Convergence mode and Adjust VLIN to get equally spaced horizontal grid lines.
10. Measure the length of the central grid lines and note the number of horizontal and vertical grid lines. This information is used to create an overlay grid.
11. Create the overlay grid on 40x25 x0.003 inch clear Acetate sheet, which you can get at the Art Supply store for under $2. Draw the grid with a fine line erasable pen. Draw vertical and horizontal lines through the center of the sheet so that the lengths are the same as the central grid lines. Now draw the grid so that it has the same number of lines as the convergence grid but are equally spaced, with the outer ones at the ends of the central lines.
12. Cut off about 1/4 inch from the right side of the sheet so that the sheet can lay flat against the screen, which is slightly less than 40 inches.
13. Put a reference mark on the TV frame 2.5 inches down from the upper left side of the screen.
14. Place the overlay on the screen so that the upper edge lines up with the reference mark. The overlay sticks by electrostatic attraction.
15. Use convergence controls to remove grid distortion and converge grid colors. Refer to the Anamorphic link for details.
16. Enjoy 1080i.

Other Comments:
I didn't realize I could create the overlay grid before placing the Acetate sheet on the TV screen, until I finished drawing the grid with the sheet placed on the screen. I added grid lines as called for in the procedure. I'm sure this method took much longer no only to draw the lines but some of them were difficult to see.

Part way through the convergence procedure, I became concerned that the image width was off since I did my screen adjustment with wide screen image. Thus, I decided to repeat that step with a 4:3 screen.

I confirmed the need to press 7 often to save results since after I adjusted one grid color without it, I accidentally hit a key that switched me out of convergence mode and when I switched back, all settings were gone.

Another mistake I made was not realizing that the cursor color determines which grid gets moved.


May 13, 2011 | Toshiba 32AV500U 32 in. LCD HDTV

1 Answer

The screen has colored vertical lines and becomes to a dark black band about 6 inches of width.The tv is exactly two years old by today.


My 3-year old 52-inch Toshiba flat panel TV (Model # 52RV53U, Serial # AM409000295) developed a display problem (purchased Aug. 2008, manufactured July 2008). Vertical multicolored lines appeared on the screen just left of center. The band of thin vertical bars is 5.5 inches wide. The lines are about 1/16-inch wide. They are stationary, always exactly in same place. They over-ride any other picture on the screen (no transparency). They are there all time even with no video inputs to the TV after the unit is turned on. See picture #1. The TV works well in every other respect, but, obviously, it is annoying to watch the picture with the color band blocking about 1/6 of the picture.

Further info, pics, comments, and updates on my Facebook page at

http://on.fb.me/mVwhVN

I already swapped out the TCON board with no improvement and replugged the TCON board cables with no improvement.

Most likely it is the flat panel tab bond failure (panel made by Samsung). Further solution updates will be on my Facebook page.

Apr 11, 2011 | Toshiba REGZA 52RV530U LCD TV

3 Answers

Permanent Vertical Line on my Sony Bravia 46 inch LCD TV


What you're describing is usually the result of an improperly seated connector. With the power disconnected, open the tv and locate any connectors between the LCD screen and the driver circuit board. Unplug them, and reconnect it assuring it's properly and firmly seated. Be careful when handling these cables as they tend to be quite fragile... take your time.

Nov 28, 2009 | Sony BRAVIA KDL-46V3000 Television

1 Answer

Screen Problems with HP laptop


i think it is under of waranty. it look likes your graphic card or emmeded chip is down. need to get service.

May 27, 2009 | HP Pavilion dv6000z Notebook

1 Answer

Two inch wide black lines down center of paper


It probably the cleaning blade on the drum unit ( deformed rubber blade )

Mar 24, 2009 | Sharp Office Equipment & Supplies

1 Answer

RCA HDLP50W151 50 in,, got blue line on left part of screen


If you have a DIRECTV - push the reset on the Directv receiver.

JB

Jan 08, 2008 | RCA HDLP50W151 50" Rear Projection HDTV

Not finding what you are looking for?
Hitachi 42EDT41 42 in. HD-Ready Plasma Television Logo

Related Topics:

1,065 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2307 Answers

The Knight
The Knight

Level 3 Expert

73086 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...