Formatted cisco valet am10

find a reset button in ur valet connector, if u didn't get , find a whole and wrote above the whole rst, or nothing if u find a whole many devices has reset button bottom side if find a whole hardly press by pin or needle press and hold when all light off or blink or restart when all lights restart or single light restart remove the needle and wait when all lights stable , and now ur problem fix.

Read HERE

if you don't have pdh or win ra program on your com you cant open them

Computers are a right pain good luck with your problem

Hi,

Looks like, you are installing in vista or Windows 7..Sometimes in these OS , it needs elevated privilages..Try to enable in Network connection by clicking RIGHT CLICK on network icon & run as Administrator privilage..OR try to install with Administrator privilages...I hope this will work

OR if there is driver problem,,Try to download drivers from the below link

http://homesupport.cisco.com/en-us/wireless/valet/AM10

Please rate & vote if you like solutions

Thanks
Sandeep

You can find the driver here: LINK
Just go to Downloads tab and select your operating system version.

I will recommend you Cisco's Valet AM10. Its a plug and play device in which there is no need to install the drivers or anything like that. See here

go to homesupport.cisco.com/en-us/wireless/valet/am10
go to the downloads tab

Try this number 888 641 0215