Question about Prima C2012 TV

2 Answers

LC-23Y25 Problem with turning on power?

My problem is that my picture will not show when i push the power button. Normally the red power button would turn blue and show the Prima logo as the TV turns on. But the red power light would just blink red and the Picture/TV ill not turn on. Could this be a power issue, or possibly the bulb being burnt out?
Appreciate any direction. ty.

Posted by on

  • Anonymous Feb 16, 2009

    I also have the same problem with my LC-23Y25 Prima. only the red light comes on, indicating power, hitting the power button doesnt seem to have any effect.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

So i had the same problem. red light came on, but no blue light or anything on the screen. it turns out that there were some capaciters blown on the circuit power board. unless you have a good understanding of circuit boards, its not a quick fix. but for someone who knows their electronics, its not too hard, and its not expensive to fix, unless you bring it into a store. but the supplies needed arent expensive. good luck

Posted on Feb 20, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 160 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony bravia kdl55hx729 3d led tv turns on 3 seconds shows picture than four red flashes


Hello,
the error light sequence that you are seeing is indicating a "backlight error". Most likely you have a bad inverter board -the board that powers up the back-lights behind the display panel. They might be available via ebay if you are a DIYer, or you need to call for sony service.
Good Luck!
Rich Lilja

Dec 07, 2013 | Sony Bravia KDL-55HX729 LED Internet TV...

1 Answer

SHARP LC-C5255U 52 INCH BLINKING POWER BUTTON, NO PICTURE WHEN I PUSH THE POWER BUTTON IT IS ORANGE, I CAN HEAR SOUND FOR 2 SECONDS AND THEN THE POWER BUTTON TURNS GREEN AND BLINKS. I LOSE SOUND AND...


It can be the power supply, backlight inverter board, etc.
First thing to inspect will be the caps in the power supply module, look for caps with leaking/bulging tops, check the DC output voltages, ect.
Learn more about troubleshooting here:
Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.

Dec 11, 2010 | Sharp LC-C5255U 52 in. LCD TV

2 Answers

The power light blinks and the tv doesn't turn on


you should perform the initialization to factory defaults.

May 24, 2010 | Sharp LC-32SB23U 32 in. LCD TV

2 Answers

My sharp tv wont stay on, it flashes green


Hi i have seen this before sharp hdtv's are known for having the internal power supply go faulty

Feb 01, 2010 | Sharp Aquos LC-32G4U 32 in. HD-Ready LCD...

2 Answers

No picture no sound opc light and power light


This is very common in sharp tvs.U turn it on.U get power on light stable right?U hear a click,one or twice,sometime tv is good right?Sometime POWER light and OPC light flashes?Push the power button on/off couples times will work, picture will come on.If keep trying off/on couples time after POWER and OPC flashes,don't ever stop and never get backlight and picture.Ur Video backlight board is dead must replaced.

Dec 28, 2009 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

Micronpc cpu will not turn on when pushing the


see ur ups is getting dead
i'm working with that one two

try to on it after sometimes keeping the switch on

"can u rate me, for my hint... please"
thanks

May 17, 2009 | MPC Computers MicronPC power supply - 220...

1 Answer

TV turns on the on/off light turn red and green coninually


IT MAY SOUND WIERD BUT SAME HAPPENED TO ME, CHECK THE POWER CORD, NOT WHERE IT GOES INTO THE WALL, BUT WHERE IT GOES INTO THE TV, TRUST ME, JUST PUSH IT IN MORE.

Jan 30, 2009 | Akai PDP-5016H 50 in. HD-Ready Plasma...

Not finding what you are looking for?
Prima C2012 TV Logo

Related Topics:

414 people viewed this question

Ask a Question

Usually answered in minutes!

Top Prima Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Are you a Prima Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...