I have a Minolta Di 520 which I plugged on to electricity a few days ago. But reported a malfunction with c-0600 as a code. How can you help me solve this problem? In the course of shipping this item was not caged like the other machines. It was only wrapped with plastic materials. On being delivered and item uncovered and inspected , I detected that the top of copier was dented and the photocopying bulb was even broken. But these dented parts have been straightened and a new bulb put in to replace the broken one but the same malfunctioning code c-0600 is still appearing as it was happening before the repairs. Please help me solve this problem for me.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Open the front door, up left small access cover remove and push trouble reset button. Once reset the malfunction and turn OFF and ON the Power Switch. If the same malfunction is still detected, check cables for proper connection and, if they are okay, change PWB-B. If you can find one, quite old machine, a legacy Minolta, now Konica MInolta
Open the front cover to your left you should see a small access cover remove the bolt press the trouble reset button if the code comes back then have tech look at it below is a web site for parts, do not continue to reset the part you are resetting is the fuser the hot part could catch on fire that would ruin a perfectly good day
C1441 1. Reset the malfunction. 2. Check that the Original Glass is properly installed. 3. Check for extraneous light and check to see if the CCD Assy and mirrors are installed at the correct positions. 4. If the same malfunction is detected again, change Image Processing Board.
· These malfunctions are concerned with faulty symptoms as they relate to software, hardware,
and communications. For remedial actions, change the board, check for cable connections,
and turn the Power Switch OFF and ON.
(6) C10]] to C13]]
C1300 1. Reset the malfunction and turn OFF and ON the Power Switch.
2. If the same malfunction persists, check the harnesses and PJs between PH
Unit and PWB-A and, if they are intact, change PH Unit or PWB-A, in that order.
Scanner motor failure, that is the motor that run the big bright light under the big glass. open the front door, small access palte upper left remove cover press trouble reset if the code come back replace the lamp