Question about Universal Remote Control Remote Control
I've programed the codes for the tv, vcr, and dvd. No problem completing that task. Everything on the remote works except the menu button. Any suggestions. It is an iwave super size tv remote.
I returned the item to the store. I did not want to pay additional money to solve the problem.
Posted on Nov 10, 2008
Tips for a great answer:
0154, 0236, 0463, 0180, 0178,
The One For All 4 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, a Motorola cable
box, and an RCA VCR.To control devices other than the default brands,perform
the following steps; otherwise skip this section:
 Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
 On the remote control,press a device key once (i.e., VCR/PVR,
DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press VCR/PVR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once.After programming
a DVD Combo device, you will be able to control channel selection,
volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
 Press and hold SET until the LED (red light) blinks twice,
then release SET.
 Use the Manufacturer's Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
 Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next
NOTE: If the device does not have a POWER key, press PLAY
Sep 26, 2011 | One For All URC-3021 Remote Control
on Jun 19, 2009 | RCA DIRECTV Satellite Remote Control
Jun 02, 2011 | Remote Controls
Jun 01, 2011 | Remote Controls
Feb 12, 2011 | One For All URC-4021 Remote Control
Jul 31, 2009 | Innovage Jumbo Remote Control
May 16, 2008 | Philips Remote Controls
Mar 12, 2008 | Radio Shack (15-2147) Remote Control
Nov 21, 2007 | RCA RCR450 Remote Control
Nov 13, 2007 | RCA RCR450 Remote Control
99 people viewed this question
Usually answered in minutes!