Question about ViewSonic N2750w 27 in. HD-Ready LCD Television

1 Answer

Pc hook-up/sound issues

I just hooked this one to my pc and I'm unable to get the speakers to work. I know there is sound out of the pc because I've tested it with external speakers. I also know the monitor speakers work because they do fine in tv mode. But for some reason the sound output from the pc isn't coming through. I've played with the menus back and forth and there doesn't seem to be anything there indicating improper settings. Any experience with this out there?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: pc hook-up/sound issues

On the bottom of the monitor there is a audio input. you must connect you pc output(green) to the monitor input with a male to male audio cord. you can also use a rca cord with two adapters.

Posted on Jul 12, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

I have a sceptre flat screen i bought 2 years ago (40") the sound just quit can hook up external speakers?

Read the owner manual or check all the inputs on the rear to see if it has those connections---it is also possible a surround system routed from a box (cable or sat) might work to bypass this issue.

and do not forget to check in the set menu that the speakers did not somehow get switched to OFF.

Dec 08, 2012 | Sceptre Flat Panel Televisions

1 Answer

I can not get the sound to work on the tv without the speakers

Need to know some things:

Brand and model number of the set.

If you connected speakers from one unit to another did you disconnect speakers from the TV?

Speakers have different impedence's---(resistance) and if you hooked for example a 32 ohm to a set which uses 4 ohm speakers you may have little or NO sound.

Also if for some reason you had both speakers for both hooked up at the same time and turned the units on---may have destroyed the audio circuit.

Clarify a little what is hooked up and from where and how.

Mar 24, 2012 | Flat Panel Televisions

1 Answer

We just got a new cable box and now the Picture works but no sound. The volume is not muted on the tv or cable box. We've tried connecting the cable box three different ways and still get the same...

Does say a dvd player give sound when connected to the same input? If you have determined that the source is good and the speakers are turned on in the menu then I would replace the main board.

Sep 08, 2011 | Sony KDE-50XS955 50 in. Plasma HDTV

1 Answer

Sound is not working. everything is plugged in right. got the tv from my father-in-law who always had it hooked up to a receiver box. now we have it and dont have a receiver box and are unable to get any...

it sounds like the internal speakers are just off. you should be able to navigate the menu and find where to turn the speakers back on. i have my tv set up with a surround sound system and turned the internal tv speakers off. should be in the sound settings or with a picturre of a speaker.

Dec 24, 2010 | Pioneer PDP-507XD 50 in. Plasma Television

1 Answer

I have a 42 inch Insignia plasma tv. I only hook

If you have the audio cables hook up correctly to where the video cable from DVD is connected to, it should be RED and WHITE wires for audio. Then go to on screen audio setup menu to see if the speakers is turn off in the menu. Also try hooking up the powered PC speakers to the AUDIO LINE out RCA jacks to see if you get the sound OK there.

Nov 03, 2009 | Insignia 15 in. Flat Panel LCD HDTV

1 Answer

Sound problem SVA HD4208T VI PDP

Hi there, I think you are ecnountering a connection issue. If you are using the yellow red and white connection then make sure all these wires are connected to the corresponded input line. Your television has two composite input line. Make sure the red and the white wire is connected in the same input line as the video. For example, Connect the yellow red and white wire in Input1 ( all are in the same input line) If you have any addittional question, please feel free to contact me. Thanks, Mike

Nov 04, 2008 | SVA-USA HD4208 42 in. HD-Ready Plasma...

1 Answer

No sound on my phillips 42

Hook it up with component cables plus L&R analog audio. Make sure the Speakers are not turned off in the settings. Unplug, wait 30 sec's. or even overnight. If still no sound, try cable or air/rabbit ears on the internal tuner. If nothing, bad main board. $350.00 from Andrews.

Jul 04, 2008 | Philips 42PF9630A 42 in. Plasma Television

2 Answers

Audio output not working

I had what may have been a similar problem and even talked to Westinghouse to see what I was doing wrong. Woman suggested there was a problem with the audio output port and suggested I exchange tv for another one. When the new one had the same problem, I discovered that to get audio out requires the volume to be turned way up on the tv (set speaker preference to external only if you don't want sound from tv speakers as well). If you have a digital optical connection on both the tv and the home theater, the sound output is independent from the tv setting and is easier to work with.

Oct 04, 2007 | Westinghouse LTV-32w4 32.02 in. LCD HDTV

Not finding what you are looking for?
ViewSonic N2750w 27 in. HD-Ready LCD Television Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Flat Panel Televisions Experts

Cindy Wells

Level 3 Expert

4721 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a ViewSonic Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides