Question about Televison & Video

1 Answer

Bush Freeview Recorder Factory Reset

How can I hard rfeset my freeview recorder? It has started to play up, blocking the hard drive and freezing whenever it feels like it! Think a hard reset may be on order!

Posted by on

  • Anonymous Dec 15, 2008

    i have the same problem, freezing every morning first, now all the time and now an error opening recorded programmes(hardrive), I did reset it before by the factory settings in setup and it worked well for a week now the same problem again, Does anyone have any advice? shall i bin it?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 1 Answer

Password I did not put one in and it keep on coming up

Posted on Aug 22, 2015

5 Suggested Answers

SOURCE: Bush BTU160DTR No Picture

Check the scart lead is fully in on the box and the tv

Posted on Sep 25, 2009

  • 1 Answer

SOURCE: CNNECTING DMREZ27EB FREEVIEWDVD RECORDER, TO MY TV 2 SCARTS, AND MY PANASONIC VCR VIDEO RECORDER

I CONNECTED SCART TO TV 1 TO DVD FREEVIEW SCART 1, THEN I VCR SCART IN/OUT TODVD FREEVIEW RECORDER SCART 2, THEN RF CABLE FROM FREEVIEW RECORDER OUT TO VCR RF IN ,VCR RF CABLE OUT TO TV RF IN. RF SLOT IN ON FREEVIEW LEFT EMPTY THEN CHANGED TV TO AV 2 WHEN USING TO RECORD /PLAY EITHER VCR OR/ FREEVIEW DVD . I DO HOPE THIS HELPS SOMEONE. IT TOOK ME A WHILE TO SORT OUT REGARDS R. ELLIOTT.

Posted on Feb 23, 2008

  • 14 Answers

SOURCE: Noisy hard drive on my Wharfedale TU250PVR Freeview

Common problem, I'm afraid!
Nothing wrong with your kit, but these should help:
http://www.quietpc.com/gb-en-gbp/products/caseaccessories/acoustifeet

Posted on Jun 15, 2010

  • 1340 Answers

SOURCE: my freeview digital recorder which is a twin tuner

It sounds like you simply don't have the cables hooked up corectly to allow that.Would you please tell me how it is hooked up?For instance,what the outside cable is hooked up to input etc. I need to know everything you have available,and what OUTPUT and what INPUT is connected to where,starting with the outside cable,and if there is a cable box or not.Literally everything connected for use with the TV.Greg

Posted on Dec 08, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bush freeview recorder bu102zrh50 factory reset ive forgot my parental pin no its not 0000


Well according to the manual here
http://www.bushaustralia.com.au/wp-content/uploads/2014/03/BVR501FV.pdf
it should an option in settings called factory reset. You will LOOSE all your settings if you do that though.

Dec 02, 2014 | Bush Televison & Video

1 Answer

Why does my pvr keep freezing


Sorry can't help on this. Presumably you've switched off/on at mains and checked all connections secure. Would a factory reset help, see tips how to do on fixya, although not sure if you would lose library data.

Aug 19, 2014 | Bush BTU500DTR 500GB Twin Tuner Freeview...

1 Answer

I have just bought a Digihome pvr320sd tv recorder with freeview, can i set it up as a tv recorder only without the freeview as i already have built in freeview on my tv.


When you set up the recorder Freeview stations will be stored. This means that you can record TV stations without watching them. So you can say watch BBC1 on your TV and record a program on Channel Four. You need the recorder set up with Freeview to recorder channels. Otherwise you would have to have your TV on and recorder set to record via the scart lead. Which would be not great quality and messy.
You should be able to loop the aerial lead so that both the TV and recorder can get the signals from your aerial, if that's what is bothering you.

Dec 22, 2012 | Televison & Video

1 Answer

No sound playing dvd recorder or hard disk recording or freeview


It is possible as when the jack is used with a plug into it, it is designed to cut the sound to the speakers in the set.

Dec 05, 2012 | Panasonic Dmr-XW380 Dvd Recorder

1 Answer

I have a Bush B320DTR freeview recorder and it keeps freezing during programmes. how can i stop this happening?


From experience this sounds like a failed Hard Drive. To test this - go into Menu->Setup and format the Hard Drive (obviously this will delete everything). This may clear off any corrupt data which may be causing the fault.
If this doesn't work then a new Hard Drive would be needed.
This is certainly fixable and we would be happy to help you: GoGoDigital

Dec 25, 2010 | Televison & Video

2 Answers

LG RH266 setup with freeview tv


Sorry to say no it wont not unless the Tv set manuel says it has a Duel Freeview feed , you have to get another freeview box for the recorder .
besides If you used the freview in the tv 1 , the tv would have to be on when you wanted to record ?. and 2 you couldnt watch another channel whilst recording another .. only 1 tuner ?. also you could only record the program you had on .at the time no timer facility .
People are still used to the Old system of VHs and the fact that all videos had tuners built in so you could watch and record .. It will come and indeed some more modern DVD recorder have freeview built in again sorry but thats the facts , and dont forget if you want the pay per view channels on free view your going to need a tuner with a pay card port ... Regards Vortash

May 12, 2009 | LG RH266 Recorder

1 Answer

CNNECTING DMREZ27EB FREEVIEWDVD RECORDER, TO MY TV 2 SCARTS, AND MY PANASONIC VCR VIDEO RECORDER


I CONNECTED SCART TO TV 1 TO DVD FREEVIEW SCART 1, THEN I VCR SCART IN/OUT TODVD FREEVIEW RECORDER SCART 2, THEN RF CABLE FROM FREEVIEW RECORDER OUT TO VCR RF IN ,VCR RF CABLE OUT TO TV RF IN. RF SLOT IN ON FREEVIEW LEFT EMPTY THEN CHANGED TV TO AV 2 WHEN USING TO RECORD /PLAY EITHER VCR OR/ FREEVIEW DVD . I DO HOPE THIS HELPS SOMEONE. IT TOOK ME A WHILE TO SORT OUT REGARDS R. ELLIOTT.

Feb 22, 2008 | Televison & Video

3 Answers

Remote control codes for freeview and dvd recorder


According to the booklet you have to enter the code 119 for a Goodmans TV, however it does not work with my Goodmans portable TV and even quick search / autoscan doesn't find the TV.


Nov 25, 2007 | Jensen JER-422 Universal Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,933 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...