Question about Hitachi 57S715 57" Rear Projection HDTV

1 Answer

Service Menu Navigation

I need help to navigate the service menu on my 57S715 Hitachi HD RPTV. I can get into the menu system and select service mode, but I don't know enough about the navigation to make the required adjustments. An online search has provided general info, but I want documented info before starting into it. Any information you hcan provide would be helpful.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 40 Answers
Re: Service Menu Navigation - Hitachi 57S715 57" Rear Projection HDTV Projection Televisions

What do you want to do in the service mode?

Posted on Feb 03, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

7 Answers

Lamp timer near 10K

just go through the manual it will guide you to solve your problem..........

Aug 23, 2008 | Zenith E44W46LCD 44" Rear Projection...

1 Answer

Service menu of hitachi tv c21-f800s and c21-sf980

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience.
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Sep 02, 2013 | Hitachi Projection Televisions

1 Answer

Help to do a convergence

Hitachi and most other brands have service menu's. These service menu's have different pages. Each page is used for a different service function. As in your case you are requiring the convergence display pattern to correct the entire set. There is a access code required to get into the service menu. I would suggest getting the service dvd from Hitachi. Also make sure you replaced convergence IC's and check resistors for value change. Some Hitachi bigscreens have a digital convergence module for electronic convergence.

Hope this helps

Jan 21, 2010 | Hitachi Projection Televisions

1 Answer

What is the code to service the Samsung Rear Projection TV HCN5527W


Turn Melody off in the user menu this allows entering the Service Menu from "power on" state without using an additional lamp cycle.

With the set off, press Mute-1-8-2-Power in quick succession.

The service menu will appear for the input you were viewing before keying the above sequence in a minute or less.

Use the CH up the CH down and the select keys to navigate the Service Menu. Press MENU to return to the main Service Menu after viewing individual functions.

Later, you will use the VOL(+) and VOL(-) keys to change the Service Menu values.

I hope that this helps you, please be carefull with this information.

Sep 27, 2009 | Samsung Projection Televisions

1 Answer

How to access Hitachi 51F59A Service Menu?

Why do u want into service Menu? To safely make adjustments you will need print out of that information and if you are fixing convergence problem you must have chassis # and hand unit that came with set new.I do have infor on service menu.for 53uwx10b.most sets use same codes/but not on all adjustments.

Aug 27, 2008 | Hitachi 51F59 51" HDTV Projection...

1 Answer

Service mode for convergence

You enter the service menu by using the remote. Press DISPLAY, 5, VOL+, POWER in rapid succession. Once the screen appears, you should notice green letters and numbers at the top of the screen. Your remote acts as a navigation tool to allow you to select and change values. Keys 1 and 4 change the Item, keys 2 and 5 change the Category, and keys 3 and 6 change the Value. MUTE enters the write function, and ENTER executes it. Power exits the service menu. Keep in mind that while in the convergence mode, the keys have different functions, which we'll get to in due time. The service manual will also have this information.

Feb 16, 2008 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Sony KP-61XBR48 Service Menu Item Keeps Changing

the only thing to do is pick which video mode you want (tv, vid1,2,3,etc) and then turn off and then immediately on for an hour or two and then the picture will come on. I,ve heard it's an internal transformer problem.

Sep 26, 2007 | Sony KP-61XBR48 61" Rear Projection...

1 Answer

57S715 Hitachi HD RPTV protective screen removal & cleaning help.

Research at ...........

Generally, front speaker grill cover comes off , then
screen frame assy. off , then take apart, remove protect
glare screen. Reassemble ( keep same order - position )....T.

Please rate solution to problem........

Aug 21, 2007 | Hitachi 57S715 57" Rear Projection HDTV

Not finding what you are looking for?
Hitachi 57S715 57" Rear Projection HDTV Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides