Question about SYBA 4 Port Combo CardBus/PCMCIA to USB 2.0/Firewire 1394a Host Adapter, w/ ULEAD 5.0 - RETAIL (DSSBPCMCBO2U2F) Serial Adapter

1 Answer

Did i just get ripped off?

Tried installing this nitemare combo card and drivers and i insert the card into my otherwize flawless dell c-610 with the hopped up ddr-ram. it either shuts down or does a memory dump. did i just get rip?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 39 Answers
Re: did i just get ripped off?

Did you install the latest drivers for this device? Download and install the latest dell drivers and firware for the cardbus controller. Make sure you are using dell drivers, not microsoft from windows update.

Posted on Aug 26, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Sd-pex-vt4e4i windows 7 driver

Sybe makes your card. It was sold by many - including Newegg, here.
Here's Syba's support page for the SD-PEX-VT4E4I. It says no driver are needed, but only is supported up to Windows Vista. You want to contact support directly but I suspect this is End Of Life.
Good luck!

Apr 27, 2013 | SYBA PCI-Express USB2.0 + 1394a FireWire...

1 Answer

I have APIOTEK EC-0008 serial express port card RS 232 it is not getting installed on my dell windows XP enviornment what is the reason

have you installed drivers for the card, as windows might know what it is but it wont be able to use it till the drivers are installed click below onto what version of windows you have and download the drivers

Windows 98/M2/2000/XP/2003
Windows Vista 32/64bit
Linux RedHat 7.3/8.0/9.0

Mar 16, 2011 | Port Designs Best Connectivity RS-232...

1 Answer

Adaptec fire connect 4300 problems

Hi there i had just seen your problem 
try to remove the programm you had installed and then reinstall the windows by the cd that came with your pc/lap but when inserting it make restart and press any key to boot from cd then press R in order to repair 

attention : never install a windows different than your pc/lap company ex: dell have dell windowses

Feb 28, 2009 | Adaptec Fire Connect 4300 Retail pack...

1 Answer

Dell Optiplex GX620 will not recognize firewire controller card

1394 drivers should be native to XP, you may be able to correct this by running an SFC scan

Take out the IEEE1394 card
Insert your Windows CD (if you do not have it order a backup from dell)
Exit out of 'install screen'
click Start
click Run
type 'sfc /scannow'
press enter
you should see a progress bar, when finished restart the computer

this compared critical windows files on harddrive vs CD, and replaces missing and corrupt files

Feb 03, 2009 | Dell 2-Port IEEE 1394 FireWire CardBus PC...

1 Answer

External hard disk and pcmcia cardbus

Try reinstalling the drivers for the PCMCIA card and get drivers for the external hard drive..if that doesn't work then get this here. Don't buy dell they have bad quality products.

May 20, 2008 | Dell 4-Port USB2.0 PCMCIA CardBus Card...

1 Answer

Evergreen IEEE 1394/USB fireLINE PCI Combo Card

You might need to update the NVRAM that stores the PCI configuration that is read at POST. This is done by pressing and holding the so-called CUDA switch on the MOBO for for at least 30 seconds or so. The  eraser end of a wooden pencil makes a useful tool for this ;-) It sometimes requires unplugging the computer and removing the small battery that maintains the memory so that it is completely cleared. Please check that no connections, especially memory cards, haven't been disturbed during installation as well. HTH.

Dec 09, 2007 | Evergreen (90-FLCC-AA0) Serial Adapter

1 Answer

Keyspan SX Pro Serial Adapter set up

Do you have the driver cd of the card. For setting up a PCI card simply insert it in the pci slot and install drivers when it asks you.

I think your PCI card needs drivers

Oct 02, 2007 | Keyspan SX Pro (SX-PRO4) Serial Adapter

1 Answer

PCI adapter did not install

I don't know how you could have installed the drivers BEFORE you installed the hardware... Shut down and UNPLUG the system; REMOVE the new PCI card, then hook up the power and boot the system back to the Desktop. Check the Device Manager to be sure you're not showing any problems; if everything seems back to normal, shut down and unplug the system a second time, then install the PCI card again, restore power, and prepare to reboot the system. Be SURE that ALL of the PCI cards are fully seated in the slots, and that the main power cable (from the PSU) is fully seated in the connector; IOW, check the system just to be sure that nothing has come loose while you've been working inside the case. Next, boot the system again; Windows SHOULD detect the new PCI card during bootup, though it might NOT request drivers, if they are already embedded within XP itself... Once you get back to the Desktop, open the Device Manager and check to be sure that the new card has been detected and properly installed. If you see any question marks, error messages, or exclamation marks, take detailed notes, and post that information here, so we can help you troubleshoot the problem... Good luck; I can only give you general advice about this, because you didn't provide any specific details about your new hardware, but with a little luck, you'll get everything working without any more heartburn...

Mar 31, 2007 | D-Link DU-520 - 5-Port USB 2.0 PCI Adapter...

1 Answer

Machine locks up

install the vendor specifig driver for the PCMCIA. because windows XP sp2 is also able to detect the device and when you push the device online it is detecting and there is some other device which has got same IRQ and that is conflict with this and stop. see any error that is generated in event viwer * run>type "eventvwr" and enter * see the application/system try to detect your error log and see what microsoft says about it. otherwise post the error report Thanks Arun

Jan 17, 2007 | NEC USB 2.0 ( ) Laptop PCMCIA CardBus PC...

2 Answers

Anyone been ripped off by this company?

Call Manufacturers and see what they have to say. If they are useless, Sue them.

Nov 11, 2006 | SYBA 4 Port Combo CardBus/PCMCIA to USB...

Not finding what you are looking for?
SYBA 4 Port Combo CardBus/PCMCIA to USB 2.0/Firewire 1394a Host Adapter, w/ ULEAD 5.0 - RETAIL (DSSBPCMCBO2U2F) Serial Adapter Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top SYBA Serial Adapters Experts


Level 3 Expert

1061 Answers

Martin Murray

Level 3 Expert

1614 Answers


Level 2 Expert

68 Answers

Are you a SYBA Serial Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides