Question about Samsung LN-R328W 32 in. HD-Ready LCD Television

3 Answers

Remote control I have a samsung 32" tv and it has stopped registering any commands from the remote. It registeres volume control and the red light indicator lights up on the tv when buttons are pressed, but nothing happens.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: remote control

Take the batterys out of the remote and hold the power button down for 10 seconds then put the battterys back in and it should work. good luck

Posted on Apr 16, 2008

Re: remote control - Samsung LN-R328W 32 in. HD-Ready LCD Television Flat Panel Televisions

I have the same problem

Posted on Feb 10, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has answered 200 questions.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 217 Answers
Re: remote control

There could be a cable that is not completely seated inside the set, there may be a software upgrade also that will fix it.

Posted on Mar 25, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Manual switch ok but remote not fundtion sharo tv

Be assured that fault does not lie with the remote handset itself. In that case repair or replace it.Remote control system has two parts. One is the remote hand set and the other lies within the TV or other device for which remote controller is being used. The hand set transmits commands in shape of singnals of particular frequency and pulses per second depending on the key pressed. The other part of the remote system lying within the TV receives, decodes and responds according to the commands received in shape of signals of particular frequency and pulses of paricular width and sequence. The remote controller uses invisible infra red light as the carrier of the signal. As the light moves in straight path, no obstacles should block straight line of sight path between the remote hand set (the transmitter) and IR sensor window (part of the receiver). Hence remove the blockage from the front side of the TV.Check if the IR sensor is not defective. Check if the associated circuit and components inside the TV are not defective.Check if the TV has any switch for selecting only manual mode and locking the remote mode.Hope, some sytematic exercise will bear the successful result.

Feb 19, 2012 | Sharp LC-32SB21U 32 in. LCD TV

1 Answer

Virgin remote control code for volume on my 50" samsung plasma tv

To set up the volume control on your Telewest remote control, to be able to change the TV volume, please follow the instructions below.
1. Using the table below find your make of TV and the code which matches it.
2. Press and hold down Volume + and mute on your remote control at the same time for at least three seconds, until the green light in the top right-hand corner of your remote control flashes twice.
3. Release the buttons and enter the first four digit code from the table below. (You must do this within ten seconds).
4. As you enter the first three digits the green light on your remote control will give a short blink.
5. As you enter the fourth digit, the green light will flash twice to confirm that the volume is set.
If setting the volume is not successful, please repeat the above steps with the second or third codes from the table below.
Samsung 0065, 0584, 0037

Nov 18, 2011 | Samsung 50 in. Plasma TV

1 Answer

My samsung le32r74bdx remote control wont change channels and cant turn volume on tv up or down

You can verify that the remote is working. Get a digital camera with a LCD display.
Aim the remote at the camera lens and press the volume and channel buttons. If you do not see
a flash through the camera the remote is bad or the batteries are dead.
If you know someone with any samsung hdtv remote, you can borrow it and try the volume/channel
to see if the tv remote receiver is good.

Feb 08, 2011 | Samsung LE32R74BDX 32 in. HD-Ready LCD...

1 Answer

I need to program my telus remote to turn my 46"

Press and hold TV, then OK at the same time. Let go of TV and OK, top buttons should quickly blink red then stop press the code 1019 then hit the bottom right button marked ENTER or OPTIONS
Remote should now work with tv.
To control volume and power at the same time... Press and hold STB and OK at the same time, let go, red blinking up top enter the code 977 STB should blink red a few times.
Hit STB, see if TV volume adjusts Hit POWER. see if both STB (Set Top Box) turns off and TV turns off.
All should be good.
If both TV and STB do not turn on/off, repeat the process for the code where you enter 977

Jan 29, 2011 | Samsung LN-T4661F 46 in. LCD HDTV

1 Answer

The samsung lcd tv remote control has stopped

Hello Jacqui,
When you press the number button or other buttons on the remote do they Feel Stuck? The reason I ask this is every remote I have ever Had always ends up getting something spilt on it.
If It feels like the button are sticking then you could always try cleaning it with a baby wipe or something similar Not a sopping wet cloth.

If the remote seems to be ok you can always check your remote is working. Firstly you will need a mobile phone that has a Camera on it.

With you mobile set it up so that your camera is on. Now what I would like you to do is Point your Samsung TV remote at it and press the buttons. Whilest you are looking at your remote through you phone you will notice that a light appears. This is due to the camera Phone not liking infra-red, ( you can not see this with the naked eye.) So try your power button and you will see what I mean. Now try the other buttons and you will see which buttons are not working and those that are.

If after doing this that certain buttons on the remote are not working full stop what I would suggest you do. Rather then buying another Samsung remote as they can be really expensive.

There is another way. A lot of your friends / family or maybe even yourself may have a Sky Remote lying about not doing anything.or you can buy them from Argos cheap enough.
Please follow the steps below and you will be able to tune your Sky remote To operate you TV

with the sky remote then.

Press TV
RED + SELECT ( hold this down until it flashes twice)

Try the volume if this works then press SELECT to save this to the remote. If not then press TV again then check the volume repeart this step until the volume works then Press SELECT to save the code to your remote.

Hope this helps you out and saves you some money buying an expensive replacement.


Little Dish Fitter.

Nov 01, 2009 | Protron PLTV-32 Television

1 Answer

Remote code needed (sky+) to sync with Sony bravia kdl32v2000

1. Press tv on your Sky remote control.

2. Press and hold down select and the red button together until the red light at the top of your Sky remote control flashes twice.

3. Press tv again

Then enter the remote control code using the number keypad. The red light will flash twice if a valid code has been entered.

Sony Code: 0000

4. Point your Sky remote control at your TV and press the Power button. If this turns the off as you'd expect, then the tv should be set, press Select and the remote should work

5. If the TV does not turn off press tv, then press the Power button again, repeat this process until the TV turns off, when the TV turns off press Select.

Jan 16, 2009 | Sony BRAVIA KDL-32S2000 32 in. LCD HDTV

1 Answer

Samsung 32 inch remote control problem

I had a similar problem. Take the batteries out of the remote, press down on the number 5 for about two minutes the put the batteries back in. This worked for me.
(I got this tip from a telesales advisor. I was close to buying a replacement remote but this tip worked. Hope it does for you. I'm not sure on the science part of it but it basically resets the remote. Good luck)

Jan 10, 2009 | Samsung LN-R328W 32 in. HD-Ready LCD...

1 Answer

Sky remote


press the volume button if it works press SELECT to save if not press TV again then volume repeat this step until the volume works remember to press the SELECT button to save the code.


Little Dish Fitter

Dec 27, 2008 | Samsung LE32R41BD 32 in. HD-Ready LCD...

Not finding what you are looking for?
Samsung LN-R328W 32 in. HD-Ready LCD Television Logo

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Flat Panel Televisions Experts

xxxxxx xxx

Level 3 Expert

4681 Answers

Steve McIntosh

Level 1 Expert

11 Answers

Steven Wander
Steven Wander

Level 3 Expert

574 Answers

Are you a Samsung Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides