Question about Kenmore 79383 Dual Fuel (Electric and Gas) Kitchen Range

2 Answers

Problem with a different range...

I have a Kenmore Elite (about 4 years old) and I could not find a matching model # on your site. The one I have is 790 75903990, and the serial number is VF00908607. Anyway, the oven is not working and the message displayed is F1. Can you help me determine what the code is about? I have lost the owner's manual and can't seem to find any information on this. Thank you, Tom Blankenship

Posted by on

  • mlbrittian Nov 27, 2008

    model # is one number different 790.75902990. Same problem. flashes F1 and oven/broiler will not function.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 878 Answers

Tom, generally a f1 code implies a control problem. The tech sheet gives 3 possible causes. 1. A shorted keypad, solution to replace electronic control. 2. Controls internal checksum has become corrupt, solution is to unplug for 30 seconds, if the code comes back, replace the electronic control. 3. Control has sensed a overheating condition, relay on the board may have shorted out. Each one recommends replacing the control board. The part I have for this model number is 316127903. Says it's grey. Catriver..post back.

Posted on Oct 25, 2006

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Kenmore Elite Range  MOD 05393G23S2 is giving an F9 code. The electic panel is lighting up but the oven is not heating - any ideas ?

Posted on Aug 30, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I get a user manual for my Kenmore Elite 30 inch Electric slide in range with ribbon radiant elements model number 46804


Kenmore Elite Electric Slide In Range 30 in. 41053 - Sears

www.kenmore.com/kenmore-elite-30inch-slide...electric-range...

Kenmore
Rating: 3 - ‎30 votes
The slide-in Kenmore Elite range 41053 has a true convection oven for faster pre. ...Kenmore Elite 30" Slide-In Electric Range w/ Convection - Stainless Steel ... Owners manual - English (Warranty) .... I called SEARS repair to look at my range and the repairman told me that this range has flaws with the oven fan and there is ...

Kenmore Elite 30" Double-Oven Slide-In Electric Range w

www.kenmore.com/kenmore-elite-30inch...slide...electric/p-02...

Kenmore
Rating: 3.5 - ‎30 votes
The exciting Kenmore Elite double-oven slide-in range 4111 offers all the feature. ... Versatile cooktop options include a 12-inch triple-ring element, a 9-inch Turbo Boil Flex™ element, and a ... Owners manual - English (Warranty) .... Ovens are both conventional or can be set to convection, my first bake was a cheese cake.

Nov 28, 2015 | Kenmore Kitchen Ranges

1 Answer

Kenmore gas range 790, not getting gas to the stove top, oven works, all 4 igniters fire when any knob is used. Is this a safety shutoff and how do I fix it?


Burner Spark Electrode Replacement - Kenmore Gas ...

? 2:23
www.youtube.com/watch?v=U0VcfMJPaiY

Nov 12, 2010 - Uploaded by RepairClinic.com
+Tony Eatinsky If the electrode is not damaged than the spark module ... I have a kenmore gas stove ( 362.7555190) that won't ignite unless I use a match. ... I have a Kenmore Elite 5 burnergas range top, it auto light continually sparks? .... You most likely will need to cut or grind off the screws and get new ...

kenmore model 790 gas range. the gas stove top burners ...

www.shopyourway.com > Manage My Life > Questions
kenmore model 790 gas range. the gas stove top burners stopped sparking. ... NOTE: I do not recommend measuring voltage unless you have experience and feel ... if the spark module is getting 120 volts when the burner knob is turned to the ...

Oct 19, 2015 | Kenmore Kitchen Ranges

1 Answer

I have a Kenmore Elite double oven, model 790.48123801.(4 years old). My wife attempted to operate the self-cleaning feature and 29 seconds later an F90 error message appeared, the oven began to beep


Oven door latch error code. The oven door latched but the control board did not receive a signal that the door was latched.
The only time that the latch is used is during the cleaning cycle.

KENMORE ELITE Walloven Parts Model 79048123801

How to unlock Kenmore oven

Oct 18, 2014 | Kenmore Kitchen Ranges

1 Answer

The dryer cord does not match my plug. is that cord required or can I buy another dryer cord and use that instead?


cord for dryer should be 3 prong and center being L shape or a 4 prong dryer corder with an L shape either one is fine aslong as its a dryer cord ,,,, donot put range cords on dryers they use different amperages and could trip your breaker and cause electrical overheating of wiring....

Jan 28, 2011 | Kenmore Elite HE4 Electric Dryer

1 Answer

Kenmore Elite Electric Rnage 2 years old model 790.9662. If you set oven to 350...never gets there or takes forever. I gave up after 35 minutes abd it was only at 235. HELP! PLEASE!


the gas valve on the back isnt on... the valve doesnt stop the stovetop from working, only the oven. You are seeing the ignition element heating up and thats slowing heating the oven.

Jan 11, 2011 | Kenmore 79012 / 79014 / 79019 Gas Kitchen...

1 Answer

Lower element in Kenmore electric range does not work.


remove and take to appliance shop and they will match up for you. Make sure power is off before doing.

Feb 01, 2010 | Cooktops

1 Answer

Kenmore Elite taking long time to heat items


This is most likely a failing magnetron.

If it's less than 5 years old, Sears/Kenmore should cover the part, but you would still have to pay for a service call.

If you or someone you know decide to work on it, we have *critical* safety, disassembly, and troubleshooting info at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

We're happy to help and we appreciate your thoughtful rating of our answer.

Mar 16, 2008 | Microwave Ovens

1 Answer

Kenmore Elite Range/Oven problem.


My kenmore glass top stainless steel slide in range has an error message code F93. I was attempting to allow my range to self clean when this err message appeared. Now I can't get the door unlocked. Help?? We've had a lot of problems with this range. We've had the service tech come out probably 4-5 times for different things. I think I got a lemon. It just turn a year old-we extended the warranty . I've called to complain but I got no help. They said it had to be for the same problem each time. Even the tech said the oven was a lemon but he couldn't help us. Any suggestions?

Jan 29, 2008 | Kenmore 46123 Stainless Steel Electric...

Not finding what you are looking for?
Kenmore 79383 Dual Fuel (Electric and Gas) Kitchen Range Logo

513 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Cindy Wells

Level 3 Expert

5339 Answers

Sal De

Level 3 Expert

2694 Answers

Are you a Kenmore Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...