My shift button on the 6500 Christie wont shift down. I cant use the progector in meetings due to this problem. what do you think is the problem. I have done factory resets, put in a new lense. etc.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have a Christie RoadRunner L8 that fires up,lamps turn on and about 5 seconds after the lamps fire up it shuts down and both the warning temp. and ready lights flash at the same time. It seems to me it must be a sensor that tells it to shut down thinking that the machine is too hot-all the fans work and all of the filters are clean and it is moving serious air any clue and if so where do I start to look for such items? Thanks in advance Kirk
Here is a list of error codes for your unit: 12 Software bug. Contact dealer/factory. 13 Flash memory corrupted. Download new software. 14 Engineering only programming is complete. Call Christie, replace TIPM. 15 Attempting to download code without being in boot mode 16 Invalid interrupt. Power off/on. If it persists, contact dealer/factory. 17 Forced boot mode. Keys held down too long. 18 Attempting to program boot mode without jumper LAMP FAILURES 21 Lamp compartment too hot 25 Lamp 1 not installed 26 Lamp 1 Interlock: door open, lamp not installed 27 Unable to turn lamp 1 ON 28 Lamp 1 shut off unexpectedly 29 Lamp 1 driver overheated 2A Lamp 1 driver operation error (e.g. too hot can’t start) 2C Lamp 1 driver UART communications failure 30 Lamp 2 not installed 31 Lamp 2 door open 32 Unable to turn lamp 2 ON (unknown reason) 33 Lamp 2 shut off unexpectedly 34 Lamp 2 driver overheated 35 Lamp 2 driver reports operation error (e.g. too hot can’t start) 36 Lamp 2 driver UART communications failure 37 Lamp Watchdog Tripped – Unless lamps turn on again after 3 minutes, assume software hung.
check to see if the fans are moving. if not, replace the fans. if the fans don't come up, the projector shuts down to protect the circuitry and the lamp. if the fans are fine, most likely the power supply/ballast is not producing enough power to keep the lamp lit and shuts down.