Question about Panasonic PT-50LC14 50" Rear Projection HDTV-Ready Television

1 Answer

Picture quality on PT-50LC14

HI,

I having problem with the picture on my TV for sometime now (couple of months). It is Panasonic LCD TV model PT-50LC14-k. It shows countours around the bright light, and faces on close shots, are having dark and ligh areas. The picture it seems fine, when I watch it through VCR, eventhough it i snot HD, also the picture it seems fine when I watch DVD, but it has this distursion when I watch HD chanels. I should say that picture it looks fine for first few minutes when I turn the tv, but after few minutes gets all these problems. Someone suggest to change the lamp, so I did but the problem is still there.

Ca you help me on this problem?

Thanks

Rahim

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 37 Answers

Clean out the housing (where the lamp is) the go through your menu and check the tv settings ie...color temp, picture, contrast, ect...try resetting it back to the default and go from there

Posted on Mar 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does my panasonic hdtv 1080i pt-50LC14 have a lamp


Yes it does! Behind the front bezel under the screen. you can buy it here. http://projectorlamps.com/panasonic-dlp-tv-bulbs-pt-50lc14.html PT 50LC14 Panasonic Genuine High Quality Original Projector Lamps now...

Refer to the manual or the instructions that are shipped with the lamp.

Apr 25, 2015 | Panasonic Projection Televisions

1 Answer

I have a panasonic PT-50LC14. the tv will turn on, but there is no picture. do i need a new lamp or bulb?


It is possible if over two thousand hours of use or two years, I would suggest at least removal and inspection to see if lamp shattered.

Sep 03, 2012 | Panasonic PT-50LC14 50" Rear Projection...

3 Answers

Panasonic PT50LC14 Power issue


We have a PT-50LC14. We replaced the lamp 6 months ago with a TY-LA1000 bulb we bought from a company online (not directly from Panasonic) and it worked for 6 months. Then the TV started turning off on it's own...sometimes it would not come back on for an hour or so. We called the lamp company and we luckily had 1 day left on our 6 month warranty!! They sent us a replacement bulb and the TV would never power on. It would try to power up, but the bulb would never ignite. The power light would flash and then the lamp light would flash every 5 seconds. I had a friend that has the same type of TV and she ordered her bulb directly from Panasonic. I borrowed her lamp and it powered right up. We then called the online company and they sent us yet another replacement bulb, and I tried it today and it works. It seems like these TVs are very particular about the type of bulb used. Next time, we will be ordering ours directly from Panasonic and just paying the extra $100. We have been without our big screen for 2 very long months! I had called a local tv repair shop, called Panasonic directly, and read through countless internet forums, and I thought we were going to have to replace the ballast or get a ballast repair kit and start messing with the circuit board.

May 22, 2009 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

Reseting The Projection Lamp Hours Meter


If you need the original remote, you can order the original Panasonic replacement remote control for this model (PT-50LC14) from a major Panasonic parts distributor at the link below:

Panasonic PT-50LC14 Replacement Part Remote Control

Sometimes there's a way to reset the counter by mashing certain keys on the TV itself in a sequence, but if your owner's manual doesn't specify this option, then you may have to get the original replacement remote to be able to reset it.

Apr 10, 2009 | Panasonic PT-50LC13 50" Rear Projection...

1 Answer

No picture or sound


first unplug the unit let it cool down ....plug it back in then reset the counter....press (-) volume on the tv and while holding down press the pip/split button on the remote and that should reset the counter...

Jan 07, 2009 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

PT-50LC14


Hey Beestergirl, I just had my tv fixed for 385.00

Apr 21, 2008 | Panasonic PT-50LC14 50" Rear Projection...

Not finding what you are looking for?
Panasonic PT-50LC14 50" Rear Projection HDTV-Ready Television Logo

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

The Knight
The Knight

Level 3 Expert

68223 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...