- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
By your description it is a high voltage problem, the horizontal output transistor is probably shorted and is loading the set down which would explain the constant clicking it is making. To repair this will more than likely run what you paid for the tv. But! if you decide to go ahead with the repair then an estimate would be in order because there may be other issues. My personal feeling would be to quit while you are ahead.
Well I thought I had one of the mini-jack to F type connector cables ordered but then it became Discontinued at PacParts.com. However, if Radio Shack still carries those F-connector to mini-mono earphone plugs then with another F-type Quick Connect you can make one with a length of RG-*.*/U cable with F-type screwon male connectors. Almost every one has some of those cable or satellite pieces laying around or stored and with proper adapters can fashion one for their portable TV's.
There is a fuse on the DC power line for AC/DC sets and you can start by making sure it isn't blown. The fuse may be in the cigarette lighter plug itself, or inside the TV. If you find the fuse blown, replace it with one of the same value and try it again. The fuses sometimes do go for no good reason. If there is some internal trouble with the TV, the fuse will go again and you'll know for sure.
What type universal remote do you have? Try searching online for the manufactures site they should have information on the sequence to program as well as the various code for any given brand of TV. Often the model number is located in the battery compartment on universal remotes if it's not printed on the exterior.
I would check on the inside for a disconnected wire or loose connection at the Dc imput if it still works on ac. You can most likely get a service manual at http://www.servicemanuals.net/ if the wires are intact on the DC imput and the jack itself fits secure to the adapter. Hope this helps
The batteries are put in wrong, or there no good, or the dc jack in the back still has the plug in it for the ac adaptor. You see theres a small switch on the jack inside the unit that switches from the ac adaptor to the batteries, when the jack is iserted. Also if the plug is not pluged into the jack, then there could be a bad jack or a broken solder connection on the jack inside on the printed circiut board. good luck