Question about Lands Phones

2 Answers

Phone sys dcs pro no

Samsung dcs prostar sys no cid on trunk lines in,set up is s/#1=TRK-C1,#2=DLI,#3=TRK-A1,#4=DLI,#5=SLI,#6=VM8A,#7=NO,ROM-2 SYS ALL WORK CAN NOT GET CID TO COME UP.

Posted by on

  • 1 more comment 
  • Harry Rag Nov 09, 2008

    samsung dcs prostar sys no cid on trunk lines in,set up is s/#1=TRK-C1,#2=DLI,#3=TRK-A1,#4=DLI,#5=SLI,#6=VM8A,#7=NO,ROM-2 SYS ALL WORK CAN NOT GET CID TO COME UP.

  • Harry Rag Nov 09, 2008

    samsung dcs prostar sys no cid on trunk lines in,set up is s/#1=TRK-C1,#2=DLI,#3=TRK-A1,#4=DLI,#5=SLI,#6=VM8A,#7=NO,ROM-2 SYS ALL WORK CAN NOT GET CID TO COME UP.

  • Harry Rag Nov 09, 2008

    Rom-2 indicater light is flashing rapidly !

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

You probably need a EXPN A1 card. If you do, try this - (Found this on a different thread) :

Follow these steps :
To enter programming, you can use any display phone. Without picking up the handset.

press transfer
dial 800
passcode = 4321 (if it has'nt been changed)
press 1
press the speaker btn
dial 312
you will see 201 . press the ans/rls key, this will change where the 201 was to all
use the volume arrow up to change to CID ALLOW
press the right softkey (this key is the triangular key under the display just to the left of the scroll key.
Now, press the speaker btn and dial 414
you will see 701 in the top left of the display .
press ans/rls key. this will change 701 to ALL
press the volume arrow up to change from normal to cid trunk
press the right softkey under display .
press transfer to exit programming and you should have
Caller ID.

Posted on Nov 09, 2008

  • 1 more comment 
  • Swilin Sampson
    Swilin Sampson Nov 09, 2008

    Did you try the steps mentioned?

  • Swilin Sampson
    Swilin Sampson Nov 09, 2008

    Do you have the card?

  • Swilin Sampson
    Swilin Sampson Nov 09, 2008

    I think its best you call a Samsung tech, as this requires a bit of programming.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

There is some idea already described in fixya

Just have a look over it .

https://www.fixya.com/secure/support/t456509-dcs_caller_id

Posted on Nov 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung ds 24d - how to set the hold time before it rings again


hi, this is a feature which is in engineering programming, if you have access to this the MMC required is 501 the codes are 'Sys Hold' and 'Trans Hold', If you don't have access, you will need to contact your Telecoms maintainer. Alternatively you could use the exclusive hold, check out this site for more information - http://www.abbeytelecom.com

Aug 02, 2011 | Samsung Prostar DCS-24B-LCD Corded Phone

1 Answer

Phone lines on Prostar DCS are locked up.


That is common, the company that originally set it up, or someone who serviced it at some point changed the default password. you need to call a technician to come out and service it, this will require opening the system up and clearing the memory, then it will have to be reprogrammed.

Mar 24, 2010 | Samsung Prostar DCS Phone

2 Answers

How do I change the date & time on our Samsung Prostar DCS-24B-LCD Corded Phone


Please follow the steps :-
1) Press transfer.
2) Dial 800.
3) Enter passcode = (try 4321 or 1234)
4) Press 1.
5) Press the speaker button.
6) Dial 505.
7) The display will show.
WMMDDYY:00:00
w=day of the week (1=Mon. - 7=Sun.)
mm=2 digit month
dd= 2 digit day
yy=2 digit year
time must be entered in military time when done press Transfer.
I hope I was able to help you.

Nov 03, 2009 | Samsung Prostar DCS-24B-LCD Corded Phone

2 Answers

Samsung KCds 24B LCD


1- Press transfer
2-Dial 800
3-Enter passcode = (try 4321 or 1234)
4-Press 1
5-Press the speaker btn
6-Dial 505
7-The display will show:
WMMDDYY:00:00
w=day of the week (1=Mon. - 7=Sun.)
mm=2 digit month
dd= 2 digit day
yy=2 digit year
time must be entered in military time
when done press Transfer

Nov 13, 2008 | Samsung Prostar DCS-24B-LCD Corded Phone

1 Answer

Samsung Prostar DCS


Thanks for the reply. OK, what is the full model number? prostar 816, 1224, etc?

Nov 09, 2008 | Samsung Phone PDCSLCD12B

1 Answer

Samsung DCS 40 Prostar


Could you repost your question and tell me the type of phone system you have, you say it is a DCS 40 Prostar but I do not recall the 40, only the 408, 612 and 816. also MMC 601 is for station groups and 603 is for trunks. I'll be glad to help if you can clear this up for me. Thanks, .....Mike

Jul 28, 2008 | Samsung Prostar 816 Phone

1 Answer

Samsung Compact DCS adding 204 DLI card


Did you check MMC 724 to see if the new card is in the Numbering Plan ?

Jul 23, 2008 | Lands Phones

2 Answers

DCS Caller ID


You need to go into programming and turn cid on for all co lines on your c1 card and on all ext's that you want to show cid on incoming calls. Follow these steps :

to enter programming, you can use any display phone. Without picking up the handset.

press transfer
dial 800
passcode = 4321 (if it has'nt been changed)
press 1
press the speaker btn
dial 312
you will see 201 . press the ans/rls key, this will change where the 201 was to all
use the volume arrow up to change to CID ALLOW
press the right softkey (this key is the triangular key under the display just to the left of the scroll key.
Now, press the speaker btn and dial 414
you will see 701 in the top left of the display .
press ans/rls key. this will change 701 to ALL
press the volume arrow up to change from normal to cid trunk
press the right softkey under display .
press transfer to exit programming and you should have
Caller ID.

Mar 20, 2008 | Samsung Phone PDCSLCD12B

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

kakima

Level 3 Expert

98879 Answers

Cindy Wells

Level 3 Expert

4809 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...