Question about GE 25932 Cordless Phone

2 Answers

Bell on phone display and phone will not ring?

Posted by on

  • bl1964 Nov 08, 2008

    bell on phone will not ring

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have GE 6.0 2 phones. The first one ( base) phone will ring..but the second will not..I have tried setting the ringer and it still will not ring....any suggestions?? Thank in advance for any information you can provide......

NG from Texas

Posted on Nov 21, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

The ringer has probably been turned off, or its volume is too low.

To set the ringer on/off and its volume through the menu, follow the instructions in your guide.

If you don't have the guide, then the instructions are on the image of this web page. The image is a PNG file. It's immediately viewable if you use Firefox (zoom in once it's loaded to see original size). If you use a browser that does not render it (don't think IE renders PNG files), save it and view it with a program that does (like IrfanView). Print it out but avoid letting the program reduce the image to fit the printed page or it becomes unreadable.

Posted on Nov 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Please tell me how to turn the phone ringer back on! Right now it's off. My phone is a Panasonic KX-T7730. Somehow, while setting up my phone, I turned the ringers off & now my phone won't ring.


Hello Joyce Sia,

You have two ways to cut off ringing...

Look for a "DND" (do-not-disturb) control...
used for napping, studying or just plain
being left ALONE...

ELSE...

On the LEFT side of your base you should
also have a slide switch... a CRUDE volume
has three settings:
- big bell = High Volume
- small bell = Low Volume
- bell with an "X" over the top = OFF

Check these settings BEFORE you do a general power
and battery remove.. and begin All over AGAIN...

Ask com What Your Question

Sep 09, 2016 | Panasonic KX-T7730 Corded Phone

1 Answer

Cannot receive incoming or make outgoing calls. Only one bell ring instead of 2 when it rings and can't stop it ringing


contact your service provider . we have no idea what you might have done . right or wrong

Dec 07, 2015 | Bell Phones

1 Answer

Model: kx-tg6641. Handsets are not ringing when somebody calling. During ringing there showing line thru bell at left bottom of the handset screen. Silent mode is turned off.


As per the display of your phone, I assumed that the bell is turned OFF that's why sound is not coming out from the speaker.

OK. Go to the handset direct command menu:

Press Menu
Enter code:
#238 (Silent mode 1=on 0=off)
Then Press 'Save'
To exit, press 'Off'

Other code that may help you:
#160 (0-6 Volume)
#161 (Tone)

Good luck!

Sep 01, 2015 | Bell Phones

1 Answer

Phone will not ring bell is crossed of how do i turn it on


Can you please tell me what's the model of your Bell phone? -Thanks

Aug 22, 2015 | Bell Phones

1 Answer

The phone will not ring. There is a bar across the bell


its muted

if its a handsfree telephone you need to enable ring
usualy a button in the middle of the keypad
has a bell with a bar across the middle

if its a mobile set it in settings profile to normal ...

Dec 09, 2014 | Phones

1 Answer

How to put phone so when phone rings, cannot hear it


Press MENU/SELECT to display menu when in idle mode
Press Up or Down arrow to reach SETUP HS. Press MENU/SELECT.
Press Up or Down arrow to reach RING VOLUME. Press MENU/SELECT.
Press Down arrow all the way down, then Press MENU/SELECT to confirm.
A ringer off icon (Bell with a line through it) will be displayed on the screen.
Note: While the phone is ringing, you can temporarily silence the ringer by pressing OFF/CLEAR or MUTE/REMOVE. The next call will ring normally.

Rest of Manual details here: http://www.vtechphones.com/docMgt/public/art/52882/6041_manual.i4.pdf

Jan 14, 2010 | Vtech Cordless 6041 Phone

1 Answer

No ring for some phones after power outage- dks 930 phones


Press feature key then dial #* password 000000 next, go to sets, hit show, hit next till ringing assingment is display hit show and change from n to y on line ringing assingment. do this for each set and line that need to ring.

Dec 24, 2008 | Southwestern Bell Landmark DKS930 Corded...

1 Answer

Bell Northwest. 5.8 GHz Cordless Phone... Problem


Bell Northwest. 5.8 GHz Cordless Phone, please user manual

Oct 13, 2007 | Bell Northwest. 5.8 GHz Cordless Phone...

Not finding what you are looking for?
GE 25932 Cordless Phone Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Phones Experts

kakima

Level 3 Expert

96467 Answers

Cindy Wells

Level 3 Expert

4756 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a GE Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...