Question about Hampton Bay 24002 Ceiling Fan

6 Answers

I need a cap three and quater inches I need to remove the light and put the cap in it place

I have a Hampton Bay fan with a light fixter I want to rermove the light and put a cap in place of it it is around three and half inches round. can you help me find a cap. Thanks

Posted by on

  • goatropr524 Nov 08, 2008

    I have a Hampton bay fan and light I want to remove the light fixter and replace a cap to cove the hole it is around three and half inches round the fist answer was not close.

    Thomas D. Daniels

  • goatropr524 Nov 10, 2008

    so for nothing both of you said does not make. I got hit by you for 9.99

×

6 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 229 Answers

I have a solution for you - Home Depot sells the Hampton Bay fans new. I am currently on the phone with their service desk. I will get a part # for the ceiling fan cap if I can, if not the guy in the Ceiling Fan Dept said that he can have the service dept. order this. Obviously it would be a benefit for you to order it locally. O.K. I just got off the phone with the service desk and the fan originally came with a cap according to the service manager. He says that the Hampton Bay vendor should be able to order that part anytime Mon. - Fri. during regular business hours. Also I use a great website that has every part imaginable for ceiling fans. www.ceilingfanparts.com They have a great parts dept. only open Mon. - Friday though 1-800-365-4548. This ought to help! Good Luck!

Posted on Nov 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,472 Answers

Any metal shop can fabricate one for you quite easily if you give them the dimensions. They are not available specifically for hampton bay, but there are quite a few available for random ceiling fans. If you have more questions or need further assistance please let me know. If you find this helpful please take a moment to accept and rate my solution accordingly.
Thanks,
Lee

Posted on Nov 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 859 Answers

Hello,

Go here to find a Hunter light fixture end cap.

This is what you are looking for and I'd call them should you have any questions about finish. The sizes of these are mostly universal so don't worry about that since you are buying Hunter parts.

Any questions? Use the Comment Box text entry area below to ask me anything you need.

Regards,
Worldvet

Posted on Nov 08, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 51 Answers

Hello there may be something helpful here
http://www.eceilingfans.com/accessories_-_ceiling_fans.html

Posted on Nov 08, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

See if you can find something in here
light bulb caps

Posted on Nov 08, 2008

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hampton bay fan 40watt bulbs barely come on


Are you just using pull chains for fan & light?

Oct 20, 2015 | Hampton Bay Fans

1 Answer

How do you remove a canopy cover from a Hampton Bay fan?


Turn off the circuit breaker supplying power to the ceiling fan. The circuit breaker is in your home electrical box and may control more than just the ceiling fan. Place a stepladder under the Hampton Bay fan.


Remove the light bulbs and light covers from the fixture, if you have a light assembly on your ceiling fan. Remove the screws securing the light assembly housing to the fan with a Phillips screwdriver. Lower the light assembly, and hold it in one hand.


Twist counterclockwise the wire nuts securing the wires for the ceiling fan and light assembly, using your free hand to separate the wires. Lower the light assembly from the fan and set it in a safe place.


Turn the screws securing the fan blades to the unit with a Phillips screwdriver. Remove the blades from the fan and set them aside. Find the screws securing the canopy to the ceiling mounting plate. Loosen the screws two complete revolutions. Turn the canopy counterclockwise and unhook it from the screws. Slide the canopy over the fan motor housing and away from the fan.



Ask a helper to hold the fan motor housing if you have a Hampton Bay fan with a down rod. Slide the canopy over the down rod until it rests on top of the motor housing. Disconnect the fan wires from the ceiling wires, twisting the plastic wire caps counterclockwise. Slide the hangar ball, at the top of the down rod, out of the mounting bracket. Slide the canopy over the top of the down rod to remove it from the fan.


Regards

Sep 28, 2011 | Fans

1 Answer

Hampton Bay 52" Oil-rubbed bronze


If it's a Hampton Bay light kit, it should be no problem putting it on their fan.

Sep 04, 2011 | Hampton Bay 52 In. Ceiling Fan, San Tropez

1 Answer

I want to remove the lights and put a cap on.Where can I get the cap.


Hampton Bay parts are offered exclusively (or almost anyway) at Home Depot.

Please rate my reply & good luck! Thank you.

Jun 01, 2011 | Hampton Bay 24750 Huntington III Ceiling...

1 Answer

Replace a hampton bay ceiling fan light switch


buy hampton bay single pole fan switch for light pull three screws out pull cover off remove old switch replace with new switch

Jan 30, 2011 | Hampton Bay 24002 Ceiling Fan

1 Answer

No wiring diagram with fan ( hampton bay three speed fan with light)


white to white, black to black, blue to red, & green to ground.
If you don't have a second hot house wire(red), then put black & blue from fan to house black.

Nov 29, 2010 | Hampton Bay 52 In. Cameron II Plus Ceiling...

1 Answer

Can you replace light kit on Hampton Bay ceiling fan, Model-Cessna


Yes..
There are a bout three screws that hold the light part to the fan.
Make note of the wiring before you disconnect it also.
Remove the screws and the wiring will be exposed as the light part drops down...
Check the diameter of the light parts and find a new light kit that will fit it...
The Hampton Bay fans are exclusive to Home Depot, so most any of their light kits will fit, but any kit the right diameter will work..

Heatman101

Mar 05, 2010 | Hampton Bay Cessna 04313 Ceiling Fan

1 Answer

Hampton Bay model 11420 52 inch fan did not come with any instructions.


If the fan and light assembly are fully assembled, all you've got to do is connect the original wires to their respective(white,black and uncoated copper ground) wires. Then mount your motor/light assembly using the proper supplied harware. Next you just put on the fan blades, connect each one with the three screws to the bracket. Do the same for the other two,three or four blades. and attach them to the motor assembly. P.S. When you are attaching the fan blades, make sure the side that faces down is correctly positioned and that it matches all the rest. If this blad is to be operated using the pull cords you're all set. If the fan is mounted too high up and it is not remote controlled then you'll have to purchase a special three speed wall switch for it. In the latter case you would leave the fan speed on high on the unit itself.

Jul 19, 2009 | Hampton Bay 54 In. 5-Blade Fan, Chestnut,...

3 Answers

I need an instruction manual to put my fan up. I


www.neonlightceilingfanstyles.co.cc/hampton-bay-ceiling-fan-instruction-manuals/ - 18 hours ago

Feb 24, 2009 | Hampton Bay 44 In. White Carousel II with...

2 Answers

Ceilng Fan light fixture-metal clasps have broken off


For Hampton Bay ceiling fan replacement parts!!!
There is a a major ceiling fan manufacturer in Fort Lauderdale FL called King of Fans (website: kingoffans.com) that deals strictly with Hampton Bay ceiling fans & parts. They are the Home Depot distributor for Hampton Bay ceiling fans. Their number is 1-800-330-3267. There is also a 1-877-527-0313 number for Hampton Bay products other than ceiling fans...

Nov 25, 2008 | Hampton Bay 24750 Huntington III Ceiling...

Not finding what you are looking for?
Hampton Bay 24002 Ceiling Fan Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hampton Bay Fans Experts

Steve

Level 3 Expert

3287 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Hampton Bay Fan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...