Question about BenQ FP71E 17" LCD Monitor

1 Answer

My moniter has these weird lines beside dark areas

My moniter has white, green and blue lines next to dark or black areas on the moniter, it goes away if i raise the brightness very high, but i can't keep it that high, is there anyway to fix it? (by the way its a Benq 17")

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: My moniter has these weird lines beside dark areas

I have the same monitor. you might be able to purchase new cords for the monitor or it might just be the monitor itself if it is you will need to get a new one.

Posted on Jun 09, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The moniter blacked out, blue light is saying the moniter is still on, but screen looks like there is no power. When you turn on the moniter, the screen shows up for a few seconds, then blacks out again!...

Unplug power. Unplug VGA cable. Remove back of monitor. (four small Philips headed screws along the bottom rear. Remove screws attaching Monitor to it's base. Carefully, lean the screen away from back of case. Gently unplug 25 pin cable from the screen.
Connect AC power.
Screen should power on Gray to White. Ble light comes on Blue.Flickers then changes to Amber.
Reconnect VGA cable. Monitor should work.
Close up the monitor in reverse order to opening it.
If these steps don't solve your monitor, consider replacing as cost of repairs may shock you.

Sep 09, 2010 | Proview PL926WBi 19" LCD Monitor

1 Answer

Schemas cable VGA monit. Philips 107

9)--+5v from vga card
10)--stand by
11)--synchronus ground
12)--serial data
15)--serial clock

Mar 28, 2010 | Fujitsu Siemens 38B1 (White) 15" LCD...

1 Answer

Lg Flatron 17" monitor turns on you see the green light then

it's prb.. your video card not the moniter if a moniter goes from green to yellow " standby" it's prb the computer not the moniter

Dec 27, 2009 | LG Flatron L1715S 17" LCD Monitor

2 Answers

My monitor is all weird colors

Generally, this is caused by the loss of one of the main color inputs (Red Green Blue). Do the Following:
  1. Check the cable connections at both the monitor and the computer. Look inside the connector for any bent bent pins (there may be some that appear to be missing, generally that is normal) then reset the connections firmly and tighten the retainer screw snug, but not extremely tight.
  2. If that doesn't resolve, try the monitor on a different system and see if the problem follows the monitor. If it does, try a different cable. If the problem doesn't occur on another system, then the video card of the effected system is suspect.
  3. If issue occurs on multiple systems with known good cables, then the monitor will need replacement.

Dec 21, 2009 | Computer Monitors

1 Answer

Hi my monitor has bright colours on it and i cant make out what im doin its really bright and hurts my eyes

Turn off the pc but leave the monitor on. unhook the monitor from the pc. the screen SHOULD run a "self test" with a moving white green red blue box. if that box is on a bare black screen and there are no bright spots or cracks or anything weird looking, then the screen itself is ok. If however, you see odd shades of blue and pink and it looks cracked or scratched or has lines in it, then it is time to replace that screen.

Nov 10, 2009 | Dell E173FP 17" LCD Monitor

3 Answers

When I hook up my moniter it does not work like other moniters.

ok sounds like you have a broken pin on your cable if you look in the end of the cable plug the part thet goes into the box but also check both ends if they are there
failing that take monitor to roof and heave ho away it goes

Jul 25, 2009 | Compaq P 1220 22" CRT Monitor

1 Answer

I have a blue line in my monitor

line driver element defective. no repair possible, to my knowledge. replace LCD or ignore line.

Mar 31, 2009 | Samsung SyncMaster 740N 17" LCD Monitor

1 Answer

Monitor goes blank less than a second after turning on.

the moniter may be having  some technical errors   maybe the IC's has got corrupt 

you need to call the seller of the moniter

Sep 06, 2008 | BenQ FP71G 17" LCD Monitor

2 Answers

Samtron vga cabal color coding problum

1) RED

Jan 23, 2008 | SAMTRON 55V 15" CRT Monitor

2 Answers

LCD monitor problem

what is the solution for this? my husband just turned his pc on when we got home and there are line blue lines running up n down in the black

Oct 11, 2007 | Computer Monitors

Not finding what you are looking for?
BenQ FP71E 17" LCD Monitor Logo

Related Topics:

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ Computer Monitors Experts


Level 3 Expert

2598 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a BenQ Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides