Question about Evga e-GeForce2 Ti (64 MB) Graphic Card

1 Answer

Headphone problem i put a the new graphics card in and i have sound but cant talk into mic and i had it when i had my old one in.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 55 Answers
Re: headphone problem

Check the windows Audio panel. My guess is that the microphone is muted under the control panel for audio. You can get to it by double-clicking on the speaker icon in the lower right-hand corner of your screen.

Posted on Oct 24, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I put graphics card without installing the driver and now none of the display is working

Was the old card on the mother broad? If so put the video cable on it and restart it go to to bios set up and turn off your old video card. If not take out the old card.

Mar 07, 2014 | Graphics Cards

1 Answer

No Sound after fitting Graphice Card

try reinstall audio drivers

Nov 17, 2013 | Graphics Cards

1 Answer

Element tv code direct tv

Not following... This is what I think you may be saying: You can't get the TV to use the RCA input?

The reason for my confusion is "rca surround sound". RCA will only carry left and right channel (stereo). It can't push surround sound unless it's setup as a direct input [typically an 8 channel input, where you would have 8 RCA cables (or 4 pair) connected].
The headphone jack, if using a 4-pin headphone jack (it has 4 sections of metal, vs a 3-pin, which only has 3 sections of metal), may be able to send something closer to surround sound, but it wouldn't be a true surround sound. You would need to use fiber optic, HDMI, DVI, or digital coax cable.

The sound settings in the OS on the computer need to be set to push the surround sound, or it will only push stereo. You'll probably need to spend some time there testing all the setting options.

Oct 19, 2013 | Graphics Cards

2 Answers

Video card will not start, comes up This device cannot start, code 10. Cant get games to boot either

Get the latest driver, or revert to older driver.(best to uninstall present driver first).

Mar 04, 2010 | Nvidia GeForce FX 5500 Video Card Graphic...

1 Answer

The i need to disconect somthing because i cant see anithing wen i conect the port to the card but wen i buthem back to normal i see my monitor

sounds like yo had the same Problems that I had with my 5200 geforce The install did not go well. what was happening was the direct x was binding to the old mother board graphics system and not the new card . to make it rebind just change the refresh rate in the nvidia icon in your task bar . disable the display adapter from device manager for the motherboard graphics .put the card in the slot change the monitor cord boot up check you direct x by typing in run dxdiag and test directx to be sure it is running with your card you can also see that from the about nvidia you must have the driver for the card installed to do all this.. hope I helped install the driver first then disable download latest drivers here 

Nov 21, 2009 | SuperMicro NVIDIA GEFORCE PCI-E 5300 VGA...

1 Answer

No graphics. but have sound

Did you uninstall the old drivers/software for your old card before installing the new ones? Sometimes this will cause a conflict especially if you are going to a completely different chipset card, ie. nvidia to ati or vice versa. If this does not clear up the problem then test your new card in a different computer to see if the card is bad. Hope this helps.

Aug 08, 2009 | Graphics Cards

1 Answer

Other party cant hear me in Skype out

just make sure Zone alarm is not blocking that out going port, disbale zone alarm and try using skype. if ity works undo each port separately that it is blocking until you hit the riht one. Any changes to video and sound cards are automaticallk registered in ZA and blocked until told its OK

Jun 21, 2009 | Color Graphics ATI FireMV 2250, PCI...

1 Answer

AGP x1650 pro 256mb just stops working

you wont damage anything but get at least a 450-500w power supply. Nothing should be damaged

hope this helps

Jan 03, 2009 | Power Color 256MB PowerColor ATI RADEON...

1 Answer

My sons installing a graphic card into his pc,when he turns it on it gives a loud whistling sound

Does he have a mic pluged in? If so make sure that the boost is turned off.Or make sure the mic is not too close to the speakers. That will cause feed back.

Dec 30, 2008 | Graphics Cards

1 Answer

Cant get card to work

What card were you using before? Was it agp/pci or onboard graphics?

Did you uninstall that via device manager first before putting in new one? Use drivercleaner pro to remove all traces of old drivers progy :)

Jan 04, 2008 | ATI RADEON® 9250, (128 MB) AGP Graphic...

Not finding what you are looking for?
Evga e-GeForce2 Ti (64 MB) Graphic Card Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Evga Graphics Cards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

2598 Answers

Rhythm Gandhi

Level 2 Expert

94 Answers

Are you an Evga Graphics Card Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides