Question about Car Audio & Video

Open Question

MERCEDES BENZ RADIO CODE MODEL CM 1910 SERIES A 208 820 1186

Posted by on

5 Suggested Answers

SOURCE: cm 2299 radio code for mercedes benz clk 320

contact MB headoffice -

Posted on Jun 07, 2008


j_del
  • 1586 Answers

SOURCE: radio code for mercedes benz

You need to take registration, title, and photo ID to your dealership. That proves you are who you are, and that the car belongs to you. They can look up your code based on the VIN number of the car. Be prepared to pay up to an hour's labor to have this done (it varies by dealer).

Posted on Jul 21, 2008

  • 51 Answers

SOURCE: s420 radio code

If you call the dealer with your VIN, sometimes they will give you the code over the phone. Some others will need you to bring in the vehicle to make sure you're not dealing with a stolen radio. They sometimes pull the radio out to get the serial number off the radio and can look up the radio code in their system.

Posted on Aug 19, 2008

  • 1 Answer

SOURCE: mercedes benz 1998 e320 radio code#wdbjf65f3wa684868

GO HERE

http://www.beckerautosound.com/Code_request/Code%20Request%20Form.htm

Posted on Feb 23, 2009

mx5turbo92
  • 545 Answers

SOURCE: i need the mercedes benz 1999 clk 430 radio code

AR82.60-P-7502-01A Coding Radio
(MODEL all with CODE (750) Radio Becker Europa 2000 with CODE (751) Radio Becker Grand Prix 2000 with RDS)

  1. If the radio is disconnected from the power supply, it is not operational when re-connected. After switching on the ignition and the radio, the readout CODE appears in the display.
  2. The code number for the radio is advised to you on the enclosed CODE CARD.
  3. To enter the first digit of the code number, you have to continue pressing station button 1 until the correct digit appears in the display. Adopt the same procedure for the second, third and fourth digits.
  4. Once you have entered the correct code number with the station buttons 1, 2, 3, 4 and confirmed the entry with the SEEK button (press down), the readout CODE disappears. The radio can now be operated.
  5. If you enter a wrong code three times, you must wait 15 minutes before making a new entry. In addition, if 9 incorrect entries are made, the radio will then not operate for 24 hours. During this time the radio and the ignition (terminal 15) must remain switched on.
AR82.60-P-7502-01B Coding Radio
(MODEL all with CODE (353) Audio 30 APS with CODE (510a) Radio MB Exquisit with traffic news decoder, with RDS (Becker) with CODE (512a) Radio MB Special with traffic news decoder, with RDS.)

  1. If the radio is disconnected from the power supply, it cannot be operated by simply reconnecting. After switching on the ignition and the radio the word "CODE" appears in the display on the radio.
  2. The code number for the radio is given on the enclosed CODE CARD.
  3. Enter the code number with the station button, e.g. number 1, station button 1. After entering the first number the word "CODE" disappears and the number entered appears followed by 4 dashes. The next character to be entered flashes. After entering all five numbers, the first character starts flashing again. In this state the code number can be written over as frequently as desired. A correction can be made only by entering the complete code number again.
  4. Confirm code number: Press TUNE, AUTO/SEEK or SC button. The radio automatically switches on and indicates the radio station or frequency stored with station button 1.
  5. If an incorrect code number is entered and confirmed, the word "CODE" appears again on the display. If an incorrect code is entered three times the word "WAIT" appears on the display and the radio locks up for approx. 10 min. If the code is entered incorrectly three times again the radio locks up again for 10 min. Three more incorrect entries (a total of 9 incorrect attempts) increase the lock-up time to 60 min. Another three incorrect entries lock up the radio for another 60 min. The waiting time runs only when the radio is switched on.

Posted on Dec 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 mercedes benz radio is not working when i turn it on its says code n i enter know what the code is. I need help....


Unfortunately, this will probably be a dealer visit issue. You will need your VIN number for the vehicle. It may cost a little, but if you don't want to replace your stock radio, this is the route to go.

Aug 14, 2011 | Car Audio & Video

1 Answer

I have a Mercedes Benz e 240 1999 radio cd player error e99 please how can I fix it


Reset the radio and enter the code because it might think it's stolen

Feb 14, 2011 | Car Audio & Video

1 Answer

Needs radio code after battery went dead. 2001 Mercedes benz e 430 4 matic.


Hi there,
You will need to contact any Mercedes Benz Service center with your VIN from the vehicle. They may also need you to provide evidence of your ownership for the vehicle. This is a standard precaution associated with security codes. Only the owner of the vehicle is allowed the information. They will give you the code from records kept against the vehicle.
regards robotek

Apr 24, 2010 | Car Audio & Video

4 Answers

Mercedes benz e320 radio code # need


hi there its usually in your car manual it a 4 or 5 digit code if its not there just simply contact Mercedes and they can provide that for you thankyou

KL

Sep 29, 2008 | Car Audio & Video

1 Answer

A can't find a code for a 99 mercedes benz E320 radio


code is vin specific and must be given to you by an authorized Mercedes Benz dealership.

Jul 28, 2008 | Car Audio & Video

2 Answers

Radio code for mercedes benz model number; MF2910 serial number; AL291010564701


You need to take registration, title, and photo ID to your dealership. That proves you are who you are, and that the car belongs to you. They can look up your code based on the VIN number of the car. Be prepared to pay up to an hour's labor to have this done (it varies by dealer).

Jul 21, 2008 | Car Audio & Video

1 Answer

Need a radio code for my car 1997 Mercedes Benz e320


GO TO LOCAL CAR AUDO SHOP THEY SHOULD BE ABLE TO RESET UR CODE

Jun 12, 2008 | Car Audio & Video

1 Answer

Disconnected my battery on my mercedes benz c230 1998 now i need a code for my radio. I tried one like that now it says wait help please thank you


if you have the message «wait» you did put a bad code, you have to ask a mercedes dealer to have your original code with your serial number of your car.
the message «wait» disappear about 30mn the first time and about 1h the second time if you reenter a new bad code, after the radio will be blocked. so get the right code and before you'll enter it turn on the radio and wait until the radio reask to enter the code.
I hope this helps
Please rate accordingly
Thank You
sserpentio

Apr 26, 2008 | Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...