Question about Jensen 143307 Remote Control

6 Answers

REMOTE I HAVE LOST THE OWNERS MANNUAL AND DONT RECALL HOW TO ENTER A CODE.BEFOE IT WAS HOLD A COUPLE OF BUTTONS AND PRESS ON/OFF UNTIL THE TV TURNS OFF.IT DOES NOT WORK NOW.I NEED A MANNAUL TO LOOK AT.WHERE CAN I GET ONE?ANY SITES TO GET ON PDF?

Posted by on

  • 10 more comments 
  • delap Nov 04, 2007

    i have phillips tv remote control model sru5010 lost the programme inst we have a grundig tv

  • nickki1978 Nov 09, 2007

    don,t know how to program control

  • Anonymous Dec 04, 2007

    I have an RCA remote controll and have lost the manual I need some help programing a Sharp tv

  • Anonymous Dec 25, 2007

    hello, i am looking for a code for my tv

  • Anonymous Dec 31, 2007

    i have a jensen sc-570 remote and i need to know how to program it to my tv.

  • Anonymous Jan 03, 2008

    i have misplaced my code book. and i got my tv from a friend and dont know what kind it is

  • jay are Jan 04, 2008

    how to get started

  • Anonymous Feb 07, 2008

    have lost the owners contro remote

  • Anonymous Mar 26, 2008

    please tell me how to program to remote to my toshiba tv

  • sluffoff Apr 26, 2008

    have manual but print to small for me to read have 4 timess but wont turn unit off beeen able to get dvd code light blink

  • rileydna Jul 28, 2008

    how do i program a code?

  • Frances Venus
    Frances Venus Feb 08, 2009

    Lost Manual Codes for Jensen Remote Model 321

×

Ad

6 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I HAVE LOST MY MANUAL FOR MY REMOTE DONT REMEMBER THE CODE FOR MY SANSUI TV , I HAVE THE UNIVERSEL REMOTE JER323 PLEASE HELP.

Posted on Oct 29, 2008

Ad

This worked out great for me thank you so much

Posted on Nov 10, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I'M FROM MEXICO AND LIVING IN THIS COUNTRY AND JUST WANT TO SAY YOU THANK YOU BECAUSE YOUR TIP REALLY HELP ME TO SOLVE MY REMOTE CONTROL TROUBLE AND CONGRATULATIONS FOR SHARE WHIT THE WEB POPULATION YOUR SMART SECRET AND IT WORKS FOR SONY TV'S TOO

Posted on Oct 13, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found it worked great i was looking for instructions everywhere and couldent find them thank you so much

Posted on May 03, 2007

The JER323 from Jensen seems to be made to work for a TV and or a VCR or DVD and or a satellite. I have it working for all three of these in a little system. My DVD is actually a CiTECH DVD/VCR combo. The following procedure worked for me. Turn off all the components of your system. Then, manually turn on the device you want to set up. Then, simultaneously hold down the orange on/off button at the very top of the Jensen JER323 remote control and hold the button for the device you want to program to work with the remote control (one of the three device buttons just below the orange on/off button. Simultaneously hold these two buttons down until the orange on/off button stops flashing and stays lit. In my limited experience, this is usually just a couple of seconds. The next step requires patience. You now just keep hitting the orange on /off button about every 3 or 4 seconds until the device turns off. This can take a couple of minutes. I presume you are trying each code until you hit one that works. This is a bit boring and you may find yourself daydreaming and may miss teh fact that the device has turned off. So you have to pay attention. You just repeat the process for each device you want to program. It worked well for my Bell Express Vu satellite, Phillips TV and CiTECH DVD/VCR combo.

Posted on Jan 05, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Turn on the tv, hold down the tv button and the on/off button at the same time until the on/off stays lit, the press on/off every 4 seconds until tv turns off, when it does, press stop button to remember the code. However, I am experiencing difficulty with this now as it won't find a code for my tv, which is not on the supplied code list. It has found it before, and stopped working so I tried it again, now it can't find it. If you do get a found code, press tv button an info button together until th on/off stays lit, start ith 1 key, then press and release each nmber until the on/off blinks, record that number, and start again until you have 4 numbers. This is the code for your tv.

Posted on Jan 03, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you program RCA Systemlink 3 RC303-C for Television Model F27255BC


Without codes:
  1. Turn on TV.
  2. Press and hold CODE SEARCH until all device buttons light, release button.
  3. Press TV button. TV button will stay on.
  4. Press POWER repeatedly until TV turns off.
  5. Press ENTER.
With codes:
  1. Turn on TV.
  2. Press and hold CODE SEARCH until all device buttons light, release button.
  3. Press TV button. TV button will stay on.
  4. Using number keypad enter code for TV.
  5. Press ENTER.

Nov 17, 2016 | RCA Televison & Video

1 Answer

Connecting direct tv todvr to a2005 20 inchrca sdtv channel code


1. Using Programming Codes

Find the TV code for your TV in the list from the Platinum Remote Control User's Guide (See References). For example, if you have a Kenwood TV, the three possible codes to try are 506, 573 and 712.

Press the "TV" button on the remote. Hold down the button until the "Sat," "VCR" and "Aux" buttons light up. Release the "TV" button and it will be flashing.

Enter the first code using the keypad. If you want the remote to control all functions on the TV, enter the code and press the # key. The "TV" button will flash three times.

Press the power button to turn off the TV and turn it back on again. If the code was correct, the TV will turn off and on. If the TV doesn't power down or back on, follow Step 6.

Try the next code from the list. Follow Steps 2 through 4 using each code until one turns off the TV.
2. Programming Without Codes

Press the "TV" button on the remote. Hold down the button until the "Sat," "VCR" and "Aux" buttons light up. Release the "TV" button and it will be flashing.

Press and release the "Power" button on the remote.


Press the arrow up key and stop. If the TV doesn't turn off, press the arrow up key again. Continue pressing the arrow up key until the TV turns off. Do not go fast when moving through the codes or you could miss the correct code. Press the arrow key and wait at least 20 seconds to see if the code works before pressing the arrow key again.

Press the # key on the remote when the TV turns off to lock in the code.


Jan 08, 2013 | RCA Televison & Video

1 Answer

I need the numbers from the mannual book to connect tv to universal remote


Universal remote codes for Sharp TVs are: 0079 0123 0063 0020 0004 0009 0226 0266 0006 0095 0122


Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Aug 23, 2012 | Big Button TV Universal Remote

2 Answers

I have a Quantum FX REM-200 remote that lost connection to my Toshiba tv. I dont have manual to help input codes i find. HELP!


Codes to check with Toshiba TV are: 0159 0178 0109 0120 0181 0105 0049 0095 0170 0260 0358 0394 0924 0012 0095 0117 0141

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Aug 16, 2012 | Universal Remote Control URC-200 LCD...

1 Answer

Hi, how do i sync my venom dvd remote to my xbox 360? thank you


To enter a TV code:
1 Turn on your TV and point the remote toward it.
2 Press and hold the TV and OK buttons simultaneously for two seconds. All of the buttons on the media remote will then light up for two seconds, after which only the numeric TV buttons (1-12) will remain lit.
3 Enter the code for your TV.
4 Press the TV button again to save the code and exit. All of the buttons on the media remote will blink three times to confirm your selection.
To scan for a TV code:
1 Turn on your TV and point the remote toward it.
2 Press and hold the TV and OK buttons simultaneously for two seconds. All of the buttons
on the media remote will then light for two seconds, after which only the numeric TV buttons (1-12) will remain lit.
3 Press the CH+ or CH- button to send a series of off commands to your TV. Repeat until the TV turns off.

Jul 02, 2011 | Venom DVD Remote Control for Xbox 360

1 Answer

I lost the manual and i dont know how to program it please help its an older direct tv remote?


10 Steps to Program Your Directv Remote

1. Turn on television.

2. Locate the switch at the top of your remote that allows you to toggle between receiver, auxilary, and TV modes. Slide switch over to"TV".

3. Hold down MUTE and SELECT until a small green light at the top of the switch blinks twice.

4. Enter code 9911.

5. Press and release the CHANNEL UP button repeatedly until television turns off.

6. When TV turns off, press SELECT.

7. Next, press the power button. This should turn the TV back on.

8. With television on, press and hold down MUTE and SELECT again until the small light blinks twice (same as in step 3).

9. Entercode 960.

10. Slide switch back over to "DTV". Your remote is now ready to use!

Jul 01, 2010 | Philips DIRECTV R15

1 Answer

I have a universal remote #urc-4640b01 lost the manual and need codes for a samsung tv and how to enter them


on the remote press tv once press and hold set until the LED blinks twice then release set enter 9-9-1 The led will blink twice aim the remote control at the tv and slowly alternate between pressing power and tv stop when the tv turns off to lock the code press and hold set until the led blinks twice there ya go ! : )

Sep 20, 2009 | Televison & Video

1 Answer

Cannot program Emerson Jumbo Univ remote to DirectTV


Try this: Press and hold the TV Power button and the Dirctv/TIVO button at the same time. Hold both buttons down for about 4 seconds or until remote light stays red. Then press the channel up button until the tv turns off. You may press the button over 100 times. You need to go slow. When the TV turns off press the enter button (or select button).

Dec 27, 2008 | Tivo DirectTV Remote Remote Control

1 Answer

England football tv remote


if this is the one i have just bought then you tune it by:
1. Press desired function (eg tv)
2. Hold down P+ and VOL- simultaneously for 2 seconds until indicator lights up
3. enter 4 digit code, indicator will go out
4. test if remote works.

if your code dont work you can try the scan option, not sure what its called, sorry

1. Press desired function (eg tv)
2. Hold down P+ and VOL- simultaneously for 2 seconds until indicator lights up
3. enter a magic search code from these
a. tv=0001
b. vcr=0002
c. sat=0003
d. ctv=0004
e. dvd=0005
(eg press 'TV' device key, then P+ and VOL- and enter tv magic code 0001)
4. Press same desired function key again (eg tv)
5. Hold down P+ and VOL- simultaneously for 2 seconds until indicator lights up and the remote is ready to search
6. pres the england key repeatedly until device turns off
7. immediately press P+ and VOL- when the device switches off to lock in the code.

Hope i have helped with this.

Craig

Sep 23, 2007 | Televison & Video

Not finding what you are looking for?
Jensen 143307 Remote Control Logo

927 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

75178 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Jensen Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...