Question about ViewSonic N3251w 32 in. LCD HDTV

1 Answer

Viewsonic Problem I'm having a HUGE problem with my Viewsonic. See the thing is that when i turn on my tv, a few minutes later it turns off again on its own. I thought it was the sleep timer but it was off. Can you please help me?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Check the power board, capacitors seem to be possibly faulty on this model. TV will need to be taken apart.

Posted on Nov 21, 2008

  • Rigo Sep 18, 2013

    I've taken mine apart with no visible signs... :(

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After turning my tv off it won't turn back on.


Ur tv power supply board have problem,and it dying.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

May 22, 2010 | LG 32LG30 32 in. LCD HDTV

1 Answer

ViewSonic N3250w


The defective power supply module will cause the following symptoms:
No Display and no Sound, Then Power indicate light changes from Green to Red.
Turns OFF by itself.
Needs to be unplug to make it work.
Works for a few minutes then turns OFF.
I repair these power supplies, if you need further assistance jah2mil@hotmail.com

Aug 22, 2009 | ViewSonic N3250W Television

2 Answers

Viewsonic N3260W made loud pop and will not turn on.


We got the part in today and the hubby fixed the tv. It is as good as new. We are very happy with our $62 purchase.

Go to http://store.ramplus.com/fsfspopfrpos.html

FSP228-3F01, FSP Open Frame Power Supply Replacement for Viewsonic N3260W - 32" LCD TV

It worked like a charm and took about 10 minutes to put in new part and put tv back together.

Jan 04, 2009 | ViewSonic NextVision N3260W 32 in....

2 Answers

ViewSonic NextVision N4060w 40 in. LCD TV, will not turn on.


While this isnt an exact fix at work, you will at least be able to view your tv. We have one at work that would do nothing when you hit the power on button, just the usual geen led flashing. We pulled the cover off and found the bulging caps, more than likely from brown outs. But we also found that none were holding a charge. So we held the power button on for at least five min, after the led would stay on for about 30 sec and then turn off. We kept hitting the power button and the screen would try to come on. It finally did. After it did come one we can power on and power off aslong as we dont turn it off for more than 10 min. After 10 min of it being off we have hold down power button again and start the whole process again. So the main problem i believe is the caps arent holding a charge, to be able to kick the high voltage circuit on. We did not replace any caps but if we do end up changing parts will post what was changed and cost. Hope this helps

Nov 04, 2008 | ViewSonic NextVision N4060w 40 in. LCD...

1 Answer

LG DU-42PX12X Plasma, picture startes flashing then goes black after a few minutes


You need to get this tv service asap.i beleive that the problem is in the inverter board or yb board.


good luck

caypianan@yahoo.com

Oct 25, 2008 | LG 42PX5D 42 in. Plasma HDTV

1 Answer

Tv cuts off and green light flashes


If your set was manufactured around July 2005, you may need a firmware upgrade to solve this issue. On the Sony website you can enter your model # and serial # to see if you TV is affected. If so, it is easy to have done and may be free from Sony. It sounds like the issue they described in the writeup on the required formware update. I had mine done within few months of when i bought it (purchased in Dec 2005) and it has been working flawlessly since.

Good luck!

Donnieboy999

Jul 19, 2008 | Sony KDF-E42A10 42 in. LCD Television

6 Answers

No Picture on Viewsonic TV


Had a problem with 32'' viewsonic.No picture and had sound.Fix is a chip on power supply($15.00) part.I replaced and all ok now.

Jan 11, 2008 | Flat Panel Televisions

3 Answers

Viewsonic N3000w LCD TV randomly shuts off...


It seems that the power fails quite often with this one burning the Inverter boards transformers. OZ960G chip may not be broken, so try getting a new power from somewhere. Measure the transformers. suppose to be somewhat 5 ohms. tolerance is +-1.5 ohm. of more, replace.

Nov 21, 2007 | ViewSonic N3000W 30 in. HD-Ready LCD...

Not finding what you are looking for?
ViewSonic N3251w 32 in. LCD HDTV Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Flat Panel Televisions Experts

Cindy Wells

Level 3 Expert

4756 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a ViewSonic Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...