I have a EWT19b4 Emerson tv. I had my xbox hooked up to it for quite awhile, then I unhooked it. Now when I hook it back up it just stays in snowflake. I live around 4 hours from a wal-mart, or even a town so a universal remote would be troublesome. I switch it to game mode etc and only a color change happens. I also hooked up my rf mod to it and it worked but horrible picture quality. What should I do?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
What type of hookups are on the back of tv ? Do you have an HDMI hookup if so try using that If your tv comes with a game mode look in back before u hook it up to place it in right spot. One last thing why don't you try hooking up old fashion way buy adapter for regular cable hookup and use channel 3 or4 that might help
This TV has composite and S-video inputs (limiting you to SD outputs from the XBOX). Since the XBOX 360 only has an HDMI output, you will need the XBOX to composite AV cable. (There is also an XBOX to S-video cable.) This adapter is sold separately from the XBOX. Buy.com has the composite video cable for $8 plus shipping here: http://www.buy.com/pr/product.aspx?sku=222079854&sellerid=18395415 . It will be more expensive at any retail electronics store.
Look like ur Xbox 360 AV RCA cables is not making contact to the input board very well.Take some rubing achahol cleans the all those input holes,take the RCA AV connections make couples twises to the red,yellow and white,will help.Make contact with ur input board it should work.
Sometimes its tricky with those buttons on the front but with most tv's you can get to the menu and change inputs.
One you figure that out you will want to go back in and add that input as a channel in the add/remove channel section then you will be able to get to that input by just changing the channel down below 2
( another way to do this would be to run the auto program with the devices on and see if it adds them that way)
There would be a RED,YELLOW,WHITE input cables that you would hook up to the back, there should be a Video mode on you remote turn it to one of the input channels and you should be fine.. Thanks and please rate.