Question about Pentax K100D Digital Camera

1 Answer

Takes picture ok but no details on rear screen of anything menu etc.nor pics

Nothing at all shows on rear screen no pics no menu nothing But it does take a very good picture but cant be viewed untill down loaded top small screen fine

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Removed bottom cover had batts installed with plate on had general probe around found pcb made screen come alive but not working completely so gather fault is with pcb, sorry in is not a true fix but if new pcb fixes then I will let you know

Posted on Nov 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LCD Display is Black


the image in the LCD monitor will darken in strong sunlight or bright light. This is normal occurrrence in device CCDs and does not contitute a malfunction. This image will not be recoded when shooting still photos, but it will be recorded wihen shooting movies.Read you owner manual and adjust the MENU, according with your o. manual.Otherwise you must go the repair shop
God bless you
8_1_2012_6_43_07_am.jpg

Jul 31, 2012 | Canon Cameras

1 Answer

When camera is switch on the menu shows but no picture/image


Your camera seems to have ccd chip problem. Image chips goes bad sometimes and when you play recorded image it is ok but when you want to turn on the camera to take picutures, you'll see scrambled image or no image at all. The remedy for this symptom requires a replacement of ccd chip. The average repair for ccd problem is $100-$130 in the repair market. -James

Mar 27, 2009 | Canon Cameras

2 Answers

LCD Display Blank


I have a sony cybershot DSC-S650, the LCD was very dark and could not see anything except if I pointed it at a bright object, everything else worked ok. I could take pictures but could barely see them in playback as well.

I took it to Sony authorised repair outlet and was told the CCD was damaged, they charged me USD $55 to repair it (in Quito, Ecuador)

Jul 31, 2008 | HP Photosmart R607 Digital Camera

3 Answers

Canon power shot A70


Hello Dear,
This is a problem with the Camera CCD unit, u r requested to carry the Camera to the Canon Care Centre and your job will be done free of cost.
Wram Regards,
Manoj Joseph
+91 9352008418

Jun 13, 2008 | Canon PowerShot A75 Digital Camera

2 Answers

LCD Display Blank


CCD malfunction, common with Sony manufactured CCD chips. You are in luck, its a free repair regardless of warranty date.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=223&modelid=8044#

Feb 12, 2008 | Cameras

1 Answer

Canon powershot a540 black/web screen display


jvsnype and ygjeff21, have you checked to see if the pistures also come up as blank or distorted (a sure sign of a CCD failure)? If the pictures are OK, then it might be that you accidentally hit the DISP button, or the camera has a loose LCD ribbon cable connector. The reason I would suspect either is that ygjeff mentioned that the LCD would spring to life when he played with the buttons on the back of the camera.

If and only if the camera still takes good pics, and the DISP button has been checked, then would next recommend reseating the LCD ribbon cable into its connector (ALSO ONLY IF THE CAMERA IS NO LONGER UNDER WARRANTY). The following link may be of some help. Wouldn't recommend going any farther than the first three pictures. You just want to jiggle or reseat the ribbon cable where the LCD connects to the circuit board, nothing else:

http://photography-on-the.net/forum/showthread.php?t=251630

Feb 06, 2008 | Canon PowerShot A450 Digital Camera

Not finding what you are looking for?
Pentax K100D Digital Camera Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pentax Cameras Experts

kakima

Level 3 Expert

98796 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Pentax Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...