Question about Philips 27MS4504 TV

1 Answer

Magnavox / Phillips wont turn on and makes a squeaky sound

Recently while watching tv- everything stopped working and was replaced by the sound of a sqeaky wheel. the tv does not despond in any way. nothing works. the only things that happens is as soon as the tv is plugged in it starts to make the squeaky sound- is there any way to fix the tv? i would assume there is a problem with the power supply.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 68 Answers
Re: Magnavox / Phillips wont turn on and makes a squeaky...

The sqeaky sound is arcing in the line timebase, or switch mode power supply, which also doubles up as the power supply for various voltages. You must get a service engineer to look at this as it will only get worse and cost more for repair if you continue to switch it on.

Posted on Oct 23, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My phillips 42MF237S/37 just makes clicking sounds when i turn it on.

Need to replace capacitors.

Oct 07, 2010 | Philips Magnavox 27MS343S 27" TV

1 Answer

I have a magnavox model 35R502-00AA help

you tv have a problem of vertical ic or cacacitor or resistor right around vertical section. that is make tv shut down in alot of magnavox tv. good luck!

Jul 27, 2009 | Standard (CRT) Televisions

1 Answer

Phillips TV very difficult to turn on. When you

If the tv tries to get on and gets on or sometimes not and finally is working, is the symptom of the tube CRT getting to defective now. Some chance exist to adjust the circuit or maybe rejuvenate it or simply the tv is not going to work again. Some simple test in the workshop can determine the issue. Get an estimate in this issue if the problem is in the first steps is not expensive but if it is the tube then is not economical to repair.

May 01, 2009 | Philips Magnavox 27MS343S 27" TV

2 Answers


switch on the tv and search for the correct channel and frequency,
go to menu, channel select, and autosearch your tv will scan through.

Mar 24, 2009 | Philips Magnavox 27MS343S 27" TV

1 Answer

Tv wont turn on

Switch off the surge protector for 2-3 minutes then switch back on and TV should work.

Feb 19, 2009 | Philips Magnavox 27MS343S 27" TV

3 Answers

Magnavox mptv68a

any magnavox controler will work just put in some good batteries . lots retail wholesale stores like walmart carries magnavox tv remotes but make sure its a magnavox.

Apr 10, 2008 | Philips Magnavox 27MS343S 27" TV

1 Answer

Magnavox tv problem

Describe the "line" for me. Is it horizontal or vertical and how long is it and how wide (or thick) is it? Keever

Mar 08, 2008 | Philips Magnavox 27MS343S 27" TV

1 Answer

Screen is black

on that tv you have to check just for circuit of high voltage - check
transistor near flyback transformer - delfo

Dec 11, 2007 | Philips Magnavox 27MS343S 27" TV

2 Answers

Black screen no sound

What is the model or chassel number it be a few thing H.O.T Resistor Caps etc..most likely horizontal output transistor.

Nov 12, 2007 | Standard (CRT) Televisions

3 Answers


Do you have a cable box? if so unplug and plug back in the box. I do have issues with boxes doing that, try unplugging the tv also. what have you done to try to fix it?

Jul 08, 2007 | Philips Magnavox 20MS233S 20" TV

Not finding what you are looking for?
Philips 27MS4504 TV Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Standard (CRT) Televisions Experts

Sp Gupta

Level 3 Expert

656 Answers

Jim Evans

Level 2 Expert

186 Answers


Level 3 Expert

485 Answers

Are you a Philips Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides