Question about Toshiba MV20FL3 Combo

Open Question

Time, day, channel, zeros SLP

I lost my manual and I can't get rid of the on-screen information: Time, day, chan no., 00:00:00 SLP. How do I make the on-screen information go away. I tried going through the Menu options, but I couldn't figure out the right ones to select. Thank you.

Posted by on

1 Suggested Answer

  • 119 Answers

SOURCE: Screen Info. won't go away: Time, day, channel, zeros SLP

try looking for a display, or info. button on your remote, you may have to press it once or twice.

Posted on Oct 31, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

How do I retune DMTech TV Freeview with DVD video please?

Please fallow bellows instruction to retune your TV.
Also please don’t forget that MENU BUTTON from your remote, it’s not the one in the middle of remote.
There are the other MENU BUTTON in left down bottom side.
Cannot access Digital TV and am asked for a Lock code Key?
If you cannot access the Digital TV option then conduct an EEPROM RESET as mentioned above. If you are prompted to enter a lock code key enter three / four zeros.
Alternatively when prompted to enter the lock code key conduct a FIRST TIME INSTALLATION also mentioned above.
There are two options available. The first option is to conduct a general reset that will reset all user preferences. The second option would be to conduct an EEPROM RESET. An EEPROM RESET would reset all the internal hardware.

Instructions - Please refer to your DMTECH remote control and user manual provided
1. Turn the Television ON ? Button on front of Television / Power button on remote control.
2. Make sure that you are on Analogue television by pressing the TV/DVB-T button until you see PR and the channel number selected in the top right corner of the screen, e.g. PR 1.
3. You must then Press the button labelled Display until a window titled INFORMATION is displayed on the screen.
4. Only when the window titled Information is present can you continue by pressing the digit (1) twice and then pressing the button titled LINE. If you make a mistake then press Display again to remove the window titled INFORMATION and repeat the process. (Display - 1 1 - Line)
5. Once you have successfully completed step four you will notice that a menu appears on the left of the screen. You can then select which option you want, either RESET or an EEPROM RESET using the arrow keys. To execute an instruction please use the RIGHT ARROW KEY and not the ENTER button.
Make sure you have properly conducted a FIRST TIME INSTALLATION and an AUTOMATIC SEARCH. If having done this you can try conducting a manual search in an attempt to force / lock the channel.
This will erase the DVBT tuner memory and reset the interface card. This may resolve poor channel reception, the inability to store channels or even receive certain channels.

Instructions - Please refer to your DMTECH remote control and user manual provided
1. Turn the Television ON and select digital television by pressing the button labelled TV / DVB-T located under the power button on the remote control.
2. On the remote control locate and press the button labelled Menu, found at the extreme bottom left of the remote control.
3. A Menu should now appear displaying options. Scroll down and select the option labelled SETTINGS using the ARROW KEYS and the enter key located in the middle of the remote control. On the next menu you must select INSTALLATION to move on to the next menu.
4. On this last menu scroll down to the last option labelled FIRST TIME INSTALLATION and select it pressing the enter key. You will then be prompted to delete all channels, using the left arrow key to select yes and press enter to execute. The television will reset and prompt you to commence an AUTO SEARCH. Follow these instructions to tune in channels.picture
Digital Television requires much more from existing aerial systems. Having more than one digital TV may reduce signal quality and strength depending on how the aerial system is set up. It is therefore recommended that if you decide to use more than one digital television you use a booster and or at least make sure you are using a digital ready aerial. Using an existing Aerial that is split may reduce signal strength depending on how many times it is split. Please see the diagram below. The best solution when using an existing aerial is to purchase a booster device. Aerial Splitting - Why a booster is recommended. A booster is used to apply a small current that boosts the existing signal. A booster can be purchased from all main TV/HI-FI - consumer electronic product retailers.

Jan 16, 2010 | Combination Televisions

1 Answer

Do akai still manafacture Luxor televisions if not


As per the information i found , Akai is the one whom you need to contact.

The Contact Details are :-

Hours of operation (Eastern Time):
8:30 am ~ 9:00 pm (Monday through Friday)
9:00 am ~ 5:00 pm (Saturday)

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Nov 07, 2009 | Combination Televisions

1 Answer

How can I turn to AV without a remote control (Samsung TV/VCR 19in Combo)

you might try going to channel 00
If you cannot just dial the number 00, go to channel 2 and then channel down.
Does not always work, but without the model number of the TV it is hard to advise further

Mar 12, 2009 | Combination Televisions

1 Answer

Vcr recording speeds

Yes. SP is "Standard Play" and LP is "Long Play", while EP/SLP are short for Extended Play/Super Long Play respectively.

Jan 19, 2009 | Broksonic CTSGT8118T 13 in. TV/VCR Combo

1 Answer

Can not get rid of closed caption from screen. Manual lost

Simply hit the cc button twice. Thank you and have a Happy Holiday

Dec 21, 2008 | Philips 20DV693R 20 in. TV/DVD Combo

1 Answer

Playing slp mode picture rolls

the video and control heads are probably dirty. a video cleaning tape might work, otherwise you will need to get a proffessional to clean if for you.

Mar 25, 2008 | Philips Magnavox 20MC4304 20 in....

3 Answers

Channel/clock auto set

Press both eject buton and rewind button

Jan 22, 2008 | Panasonic PV-C2061 20 in. TV/VCR Combo

1 Answer

TV goes off after about 5 seconds

You gotta change the vcr motor charge belt.Its all the problem good luck.

Jan 15, 2008 | Symphonic SC1302 Combo

1 Answer

Screen Info. won't go away: Time, day, channel, zeros SLP

try looking for a display, or info. button on your remote, you may have to press it once or twice.

Oct 22, 2006 | Toshiba MV20FL3 Combo

Not finding what you are looking for?
Toshiba MV20FL3 Combo Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Combination Televisions Experts

The Knight
The Knight

Level 3 Expert

66372 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Toshiba Combination Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides