Question about Kenmore 24 in. 15932 Built-in Dishwasher

1 Answer

Dishwasher does not want to drain

Hi there,

I am renting at a place with an old built in Kenmore dishwasher (I am not sure which model, it only says "Kenmore Ultra wash" on the front) and the water does not want to drain. I have removed the water distributor at the bottom and have found some paper and a fork around the edges of the circular drain, which I removed. However, the dishwasher still does not want to drain. I wanted to open it further, but I need a special tool to remove the screws and I thought I will ask advice first.

I would appreciate if you can help won't drain

Posted by on

  • fordt16 Nov 13, 2008

    I have a non draining kenmore ultrawash as well. I did the same as this other guy and continued a little further with trying to dissect the dishwasher. I removed the piece at the bottom of the machine. The water then leaked out the bottom and onto the floor. I did not see anything that would klog or cause the water to not drain. Any suggestions?

  • henley100 Dec 16, 2008

    model 15689000 ser fm 3311024 it is not draining

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 324 Answers

Good thinking,first it would help if i knew the model # if you open the door it should be right there on the left side.has it ever drained for you? is there a new garbage disposer installed in the sink? the special screw is a torx.

Posted on Nov 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore Ultra dishwasher model 665 wont drain


Hi,
Here is a tip that I wrote that will help you with your dishwasher not drainingproblem...

Dishwasher Problems - Waterwill not drain out

heatman101

Sep 11, 2011 | Kenmore 24 in. 16032 Built-in Dishwasher

1 Answer

Where can I find the model # on my Kenmore Quit Guard?


Hi


To locate the model # for your dishwasher, you'll need to look at the following places---


32c9b37.jpg

You'll see a model tag number, on that you would see the model number--


036ee2a.jpg

Hope this helps....

Daniel

Aug 21, 2010 | Kenmore 16602 / 16604 / 16609 Built-in...

1 Answer

Wont drain


Hi,
Here is a tip that I wrote that will help you with your dishwasher2_bing.gif not draining problem...

Dishwasher2_bing.gif Problems - Water will not drain out
http://www.fixya.com/support/r4078724-dishwasher_problems_water_will_not_drain

heatman101

Jun 06, 2010 | Kenmore 24 in. 15079 Built-in Dishwasher

1 Answer

My dishwasher won't drain. It is a Kenmore and about 8 yrs old


There is a panel tht separetes the top from the bottom you need to unscrew it. Place a pan under it after you see a little spout/drain hanging down that is probably fill with gunt what ever water that is in it will drain out clean it out , replace it after you've let the water run out. once you've screw it back see if your dishwasher is draining correctly.

Nov 17, 2009 | Kenmore 24 in. 15079 Built-in Dishwasher

1 Answer

Dishwasher does not want to drain


Make sure that the draining-hose is clean .... Try to put the draining-hose downwards .... it is possible that the pomp can not push the water high enough .... if the hose runs downwards ... gravity will help !

Jul 13, 2008 | Kenmore 16602 / 16604 / 16609 Built-in...

1 Answer

Kenmore 665.16705891 dishwasher


First make sure it will run by hitting "cancel' or turning the timer to drain cycle.What is the Model& Serial number???I'll be happy to get this solved for you. :)

May 17, 2008 | Kenmore 16602 / 16604 / 16609 Built-in...

3 Answers

GE Nautilus Dishwasher No water when i turn it on


You need to prime the dishwasher by placing two large cups of water into the bottom.

Mar 19, 2008 | GE Nautilus 24" Built-in Dishwasher

2 Answers

Kenmore built in dishwasher model # 665.16831792


timer is ordering draining. or solenoid is on and it drains non stop.

Oct 31, 2007 | Kenmore 24 in. 16032 Built-in Dishwasher

Not finding what you are looking for?
Kenmore 24 in. 15932 Built-in Dishwasher Logo

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

D. E. Hev

Level 3 Expert

1167 Answers

Fred Sops

Level 2 Expert

272 Answers

Cindy Wells

Level 3 Expert

4954 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...