Question about Saeco 00034 Incanto Sirius Super Automatic Espresso/Coffee Machine

1 Answer

Need parts for Incanto S-class (door unit)

Saludos from Puerto Rico; need your hlep
I had problems with the water tank “Saeco Incanto S-class Sirius” I toke it to a local shop, they disconnected the water tank sensor, told me they change it and broke the door on my Incanto, yes they broke it, then they have the nerves to tell me that they can not fix the door, so this is way I need your help, where can I fine parts for my unit., for got to mention that they also charge me 70 bucks.

Posted by on

  • fernando53 Nov 13, 2008

    Saludos Mirrsn and thank you for the info, I found a website that is grate http://cerinicoffee.com/ they email me the diagram on the unit, there service is very good.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 515 Answers

Hi,

Go to this site and find a Saeco Service Center near you.

http://www.saeco.com/countrygate/

There are two number on this spare part if it is the spare part in the machine, if it is that on the door you only have one number.

Best regards
/Mirran

Posted on Nov 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Saeco incanto Sirius led screen flashing


Electronic parts don't like water - propably you have to change LED which is iluminating tej panel

Jan 06, 2012 | Saeco 00034 Incanto Sirius Super Automatic...

1 Answer

I have a Saeco Incanto S-class sirius machine. Message displayed, "Brew Group Blocked", so I purchased a new Brew Group Unit, when I installed it, got the same message. when turned on, I can...


Brew group blocked is normally displayed when there is no water flowing through the brew unit. Remove the brew unit and use a small screwdriver(make sure machine is off and cooled), then gently lift up on cross section fitting on white plastic valve inside the machine, if water flows out it works, now we will plug in machine keep brew unit out and turn it on and press fitting in again, if water flows and pump kicks in and water flows out from valve and not under machine you are good, The coffee grind might be too fine and needs to be adjusted to coarser.

Jun 28, 2011 | Saeco Incanto Sirius Fully Automatic...

1 Answer

I have the Saeco Incanto Sirius. It makes grinding noises but does not dispense coffee, just hot water.


The grind might be too fine or the grind chamber is blocked, remove brew unit and check the door covering the grind chute to make sure it is clear, or adjust towards coarse about 2 numbers.

Apr 13, 2011 | Saeco Incanto Sirius Espresso Machine

1 Answer

Saeco S-class Incanto Sirius brew unit stuck


Try running the clean cycle again, that sometimes will help the machine to reset.

Sep 15, 2009 | Saeco Incanto Sirius Fully Automatic...

1 Answer

My saeco s-class incanto sirius machine keeps say replace water filter & ventilate even after I replaced filter


Sounds to me that water is not getting to the pump. Try charging the water filter before using by letting it sit in some water for about 5 mins.
.


Jul 23, 2009 | Saeco 00034 Incanto Sirius Super Automatic...

1 Answer

Water is leaking


Replace the tap rod assembly or the complete steam valve.

Feb 22, 2009 | Saeco 00034 Incanto Sirius Super Automatic...

1 Answer

Does not come off ventilate mode. Re: S-Class incanto sirius mode


Try this push in steam knob when it calls for ventilate, especially if you are steaming or drawing hot water, if that works the the steam valve or the tap rod needs to be replaced.

Dec 28, 2008 | Saeco 00034 Incanto Sirius Super Automatic...

2 Answers

Saeco Incanto Sirius S-Class


Hi,

Contact this Service Center, they can help you in Norway.

Nesodden tv-service
Evenstuveien 15
1450 Nesoddtangen

tlf.: 90 79 77 75
fax.:66 91 56 25

kaffeservice@hotmail.com

Best regards
/Mirran

Oct 18, 2008 | Saeco 00034 Incanto Sirius Super Automatic...

1 Answer

S-Class Incanto Sirius


Hi Erika,

Make sure the magnet in the water tank flow up when you fill the water tank.

Open the steam knob and make a cup of water to see if you can make a full cup of water.

if nothing of this help you then i think you have to replace the flow meter in your machine.

Have a nice day.
/Mirran

Aug 11, 2008 | Saeco 00034 Incanto Sirius Super Automatic...

Not finding what you are looking for?
Saeco 00034 Incanto Sirius Super Automatic Espresso/Coffee Machine Logo

Related Topics:

311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saeco Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

eyecam

Level 2 Expert

86 Answers

Ray Murphy

Level 2 Expert

67 Answers

Are you a Saeco Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...