Question about JVC RX-6000V Receiver

Open Question

Tuner stop working (radio)

My tuner ( radio )doesn't work anymore, but everything else do. I checked the anntena and that's ok.

Posted by on

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

I can't get my tuner to work, but everything else works fine. All I get is static went I turn to the radio stations on both FM/AM

If you are in a fringe area you might need an external antenna to work with your tuner. Happens.

Oct 15, 2015 | Pioneer VSX-D704S Receiver

1 Answer

I think my receiver just blew. hissing noise from all speakers, now i get no sound - but the display still

unplug the receiver, Everything- speakers, input/outputs. The only cord to the device left should be the power cord.
Power up the receiver, set the tuner on a strong station. check sound quality with headphones only.
If that was ok, now pick one speaker to test all channels with. Follow the procedure above with the
speaker. check each output channel with the tuner as a source using the one speaker. Good Luck!

Sep 03, 2011 | Kenwood VR-8050 6.1 Channels Receiver

1 Answer

I just bought the RCA CD/DVD home theater system RTD206. I cant figure out how to change the radio channels. Also cant figure out how to change the cd disk tracks. Does this system have a remote. Or do...

The system does have a remote (at least it should come with one if purchased new), and you need it to control pretty much everything. Here's what the manual says about the radio tuner (you can find the whole manual here) :

Manual Tuning
1. Connect the FM aerial and the AM loop antenna at the back of the unit. Rotate the AM loop for
better reception.
2. Press TUNER to enter TUNER mode and toggle between FM and AM.
3. When the FM station broadcasts Stereo sound, ST is displayed.
4. Tune a station by pressing repeatedly the TUNER+/- buttons until the desired station is found.
Alternatively, you can press and hold the same buttons down for about one second to activate
the automatic search function. In this mode the player will automatically tune frequencies until
it finds a station.
5. Repeat step 4 to tune to another radio station.

Storing radio stations
The player can store up to 30 radio stations in its memory. You can enter every single radio station
yourself or the player can store all available radio stations automatically in ascending order.
Automatic preset programming
1. Press TUNER to enter the Tuner mode.
2. Press and hold TUNER down for 3 seconds to start automatic preset programming.
Note: A weak signal can affect the "Automatic preset programming" function's efficiency. Adjust the aerial for better
reception and a more efficient search.
3. Radio frequencies will be browsed and radio stations stored automaitcally. When all the available
radio stations are stored or all 30 memory locations are full, the auto preset programming
function will stop.

Manual preset
1. Tune to a radio station (see "Manual tuning" for details).
2. Press MEMORY once to enter flashing Preset Loaction number.
3. While the Preset Location number is still flashing, input your desired preset number (1-30) using
the numeric buttons or press the CH+/- buttons, then press MEMORY to store it.

Retrieving preset stations
1. Press TUNER to enter the Tuner mode.
2. Press CH+/- to search up or down for the preset stations or directly press the numeric buttons.

As you see, you really need that remote. The same is true for disc play. While there are front panel buttons for play/stop, disc skip, and drawer open/close, you don't have any other control without the remote. Without the remote control you'll find this system won't do too much, unfortunately. If you bought this new, check the packing material before you throw it away to make sure the remote's not still somewhere in the box. They often come tucked into slots on the foam inserts.

Also, when you hook the unit to a TV, it's just using the TV as a video display device. The TV has nothing to do with any of the system's other functions.

I hope you have luck locating the remote! Thanks for using Fixya.

Jun 29, 2011 | Audio & Video Receivers

1 Answer

RX-V461 Yahama Receiver is hooked up to TV with optical THX cable but can't get sound. Tuner on receiver plays and all speakers work perfectly for radio listening.

double check input used on amp and make sure u use the auto format decoder fuction on your amp ok if it has none than turn it on optical digital ok that should work for you :)

Feb 10, 2011 | Yamaha RX-V461 AV Receiver

1 Answer

I am trying to turn on my sirius radio (it has been working for 1 year) and all of a sudden it says 'check sr tuner'. Everything seems to be plugged in right yet it still won't turn on. Any ideas?

Page 62: If "CHECK SR TUNER" or "ANTENNA ERROR" appears in
the front panel display, the connection of the SiriusConnect
tuner or antenna is incorrect. In such cases, check the
connection of the SiriusConnect tuner and the antenna (see
page 115).
• If "NOT SUPPORTED" appears in the front panel display, this
unit does not support the connected SiriusConnect tuner.

Or the SR Tuner is fluky. Refer to its manual and start over with IT as the product, not the Yamaha.

Jul 13, 2010 | Yamaha RX-V663 Receiver

1 Answer

Tuner not working.

These do on occasion have a bad fm tuner assembly. part number 9630145608. to verify try a fm ant to see if works

Dec 09, 2009 | Denon AVR-1908

1 Answer

Will not tune any radio station, fm or am. everything else works fine. May be damage resulting from lightning, through the antena input.

It is very possible the fm tuner pack is damaged from lighting,if you have voltage going to the fm tuner pack im sure your tuner is bad pioneer part number for your tuner is AXQ7231

Sep 26, 2009 | Pioneer VSX-D811S Receiver

2 Answers

Hello all;;;;;; i have a pioneer vsx-9500s,,,,the problem is i ran cable to my reciever so my fm radio will work but it doesn't,,,,,,,,i checked the cable on a tv and it worked ,,,,so i know the line is...

Nonsense. FM is included in MOST tv cable subscriptions- make sure your subscription includes this service. Do you have another receiver/tuner to test with?
Check all the connections between the cable entrance and your tuner; eliminate all splitters for testing. If you can get another tuner to work on your cable, it may be time to check into your tuner-
There is no difference in signal level between tv and fm- your receiver is not gonna burn up! If it has a 75-ohm cable input, use it!

Jan 04, 2009 | Pioneer VSX-D509S Receiver

1 Answer

Tuner not working - denon AVR 3805

turn left hand knob to select tuner (round knob on top left front side)

Dec 31, 2008 | Denon AVR-3805 Receiver

1 Answer

Tuner Omits No Sound - Onkyo TX-SR605 7.1 Channels Receiver

Make sure your receiver is hooked up to proper AM and FM antennae. Try switching to AM, scan stations. If you hear AM static and/or weak signals the problem could be antennas are not hooked up. FM has AFT which blocks out weak or noisey stations and you wont hear anything without ant.

May 06, 2008 | Onkyo TX-SR605 Receiver

Not finding what you are looking for?
JVC RX-6000V Receiver Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio & Video Receivers Experts


Level 2 Expert

49 Answers

Cindy Wells

Level 3 Expert

4719 Answers

Chris Hunt

Level 3 Expert

1342 Answers

Are you a JVC Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides