Question about Linksys WRT120N Router

1 Answer

Trying to configure my Linksys WRT120N router, but when I click 'Save Settings' I get an error message (324). What's wrong?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Linksys Master
  • 2,276 Answers

I think you can try upgrading the firmware on your router,

Connect the computer to the router.
Download the latest firmware.
Open the setup page of the router and upgrade the firmware.
After upgrading the firmware, reset the router and reconfigure it manually.

See How to upgrade firmware on Linksys router.

Watch video: Linksys router setup

Posted on Mar 27, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
govinda123
  • 2276 Answers

SOURCE: I have a linksys router model #wrt1601 I'm trying

LELA is a software to help you set up router. But that software has lot of issues. It will be better if you uninstall that software and change the settings of your router manually.
it is very easy to change the settings manually.
Click Here for More information

Posted on Oct 07, 2009

  • 252 Answers

SOURCE: How to configure Huwaei MT880 with linksys WRT120N router?

Try these steps:

  1. Shut down the DSL/Cable modem
  1. Power up the router (no cables just yet).
  1. Power up the modem and wait for the appropriate lights (power, ethernet, and activity – something along these lines)
  1. Connect the modem and router with an ethernet cable (if there is a WAN port on the router make sure to put the cable in this port).
  1. Connect Port 1 on the router to the network card on the computer using an ethernet cable and check to see there is a light at the correct port.
  1. Open a web browser, such as Internet Explorer or Firefox. Input your routers id (usually an IP address or an URL) in the browsers address bar and press Enter. The address bar is where you would normally see, for example, http://www.google.ca If you don't know the IP address (such as 192.168.1.1) or the URL, try going to the manufacturers web site and downloading a manual.
  1. Now, a window will open asking for a user name and password (these are given to you in the instructions of the router). For example, Dlink sets up some of their routers as, username: admin and leave the password field blank then press OK.
  1. Now you are in the configuration page of your router (wireless most probably). Here you can set the encryption, new passwords etc… If your not comfortable doing these on your own most routers have a wizard that you can follow.
  1. If everything goes alright and the settings are successful you can now try the wireless connection. Go to a machine with a wireless card, right
  1. At the computer with the wireless connection, make sure the connection is on You might be trying to connect to the network by using either the application that came with the router or windows wireless configuration. Right click the icon in the system tray and “view available networks”. If it comes up in a window saying “Windows is not setup for wireless networks” then you must right click on the correct icon in the tray.
  2. Now, in the list of available networks, click on the name of your network Click on "connect" and it should ask for your security id (the encryption code). Put in the code (usually twice) and click connect or OK. It should now be "acquiring anip address" and in a few minutes it should be connected.


Posted on Nov 07, 2009

govinda123
  • 2276 Answers

SOURCE: How to configure our router, linksys wrt120N,

You will need to check the wireless settings of the router
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.

Click here for step by step instructions

Posted on Feb 05, 2010

router-user
  • 550 Answers

SOURCE: can't save changes made to linksys router settings such as

Try to upgrade the firmware of the router. Firmware is the software of the router. Download the latest firmware of the router. Go to the manufacturer's web site and download the firmware of the router. Open the set up page of the router and upgrade the firmware of the router. Once you upgrade the firmware of the router, reset the router. On the router you will find a small reset button, hold it down for 30 seconds. release it. wait for 1 minute. Now unplug the power to the router and plug it back in. Now you will need to reconfigure the router according to the Internet service provider.

Posted on Apr 06, 2010

govinda123
  • 2276 Answers

SOURCE: error 321 linksys WRT120N

Are you trying to run the CD that comes with the router ?
You get this error when your computer is not able to connect to the router.
Actually you can say that it is a bug in the CD.
Even if your computer is connected to the router, it will say that it is not connected.
You can set up the router manually without the CD.
make sure that your computer is connected to one of the Ethernet port on the router.
Reset the router for 30 seconds. wait for 1 minute.
unplug the power to the router and plug it back in.
Wait for a minute and try to set up the router manually.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

Posted on May 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to setup router name & router password


To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down and put it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Oct 26, 2012 | Linksys WRT120N Router

1 Answer

WRT120N ROUTER TO KINDLE FIRE


To connect to your wireless router, the router's wirelesssettings needs to be configured with the SSID, encryption etc. and also thewireless cards in all the laptops/computers needs to be configured with theserouter's wireless settings. Then the laptops/desktop computers can communicatewith your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down andput it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Jun 29, 2012 | Linksys WRT120N Wireless Router

1 Answer

DNS lookup fail at random times


I can suggest you a solution. I am not sure whether it will work or not but you can try this and see if that works.

Open the setup page of Linksys router using 192.168.1.1.
On the setup page you will see Static DNS 1. Enter 4.2.2.2 in Static DNS1. And Enter 4.2.2.3 in static DNS 2 option. Save the settings.

See if this works.
Also make sure that firmware on your router is upgraded.

Jun 05, 2012 | Cisco Linksys Wireless N Home Router...

1 Answer

How do i find network key for lynksys network


To connect to your wireless router, the router's wirelesssettings needs to be configured with the SSID, encryption etc. and also thewireless cards in all the laptops/computers needs to be configured with theserouter's wireless settings. Then the laptops/desktop computers can communicatewith your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down andput it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Mar 03, 2012 | Cisco Linksys Wireless N Home Router...

2 Answers

Forgot my password for wrt120n


Looking for the Linksys WRT120N default password? You probably have little reason to access your router on a regular basis so don't feel too bad if you've forgotten the WRT120N default password.

However, when you're troubleshooting a network problem and need to get in to the device, the WRT120N default password suddenly becomes very important.

For most versions of the Linksys WRT120N, the default password is admin. As with most passwords, the WRT120N default password is case sensitive.

In addition to the WRT120N default password, you can also see the WRT120N default username and WRT120N default IP address in the table below.

Note: The Linksys WRT120N default password may be different for certain hardware orfirmware versions.

If I have that information, I'll include the exact WRT120N version number along with the correct default password. You can usually find your Linksys WRT120N version number on the bottom of the router.

Be sure to change the default router password on your WRT120N to something more secure as soon as you're in. Then use a free password manager so you'll never forget your new WRT120N password.
Help! The WRT120N Default Password Doesn't Work!

At some point during the life of your particular Cisco Linksys WRT120N, the default password, username, and/or IP address might have been changed.

In most cases, if the Linksys WRT120N default IP address has been changed, the new IP address for the WRT120N will be the same as the default gateway IP address configured for your network connection.

See How To Find the Default Gateway IP Address for help.

In situations where the WRT120N default password or WRT120N default username has changed, you'll need to reset the Linksys WRT120N to factory defaults. You can usually do that via a special button or sequence of actions.

The WRT120N manual will have specific directions for performing a factory default reset. You can download the manual for the WRT120N from Linksys Support.

Please let me know if any of the WRT120N default login data below needs updated. For other questions about the WRT120N default information on this page, see my Default Password FAQ.
WRT120N Default Password & Other Default Login DataVersionDefault UsernameDefault PasswordDefault IPPrivilegesAll[none]admin192.168.1.1Administrator

Jan 13, 2012 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

Where can i download a free installer for linksys wifi router with model # wrt120n


Are you trying to install WRT120N router?
You can do it manually without CD.
Connect the computer to the router. open the setup page and change the settings manually.
See how to setup Linksys WRT120N router

Oct 13, 2011 | Linksys WRT120N Router

1 Answer

I want to connect d'link 2640t to linksys wrt120n, hi i have a DLink 2640T modem+router with IP 192.168.2.1, i want to extend my home network so i bought a WRT120N router with IP 192.168.1.1, i am...


This is too involved to just post your router settings. I would recommend reading up on how to "cascade" your router or to make your Modem/Router act as a bridge.

The dlink will need to have its DNS disabled and have the Linksys do the DNS. Then the LInksys will be using the Dlink as its host. you may be better off seeing if you can make the dlink run in Gateway mode instead of router mode.

Then see how to implement the cascading router with your particular situation and WAN IP.

Jan 02, 2018 | Linksys WRT120N Wireless Router

1 Answer

How do I reset my WRT120N


To reset the Linksys back to the default settings - Press and hold the pinhole RESET button at the back of therouter with the power ON for 20 secs. then release the RESET button.
To connect to your wireless router, the router's wireless settings needs to beconfigured with the SSID, encryption etc. and also the wireless cards in allthe laptops/computers needs to be configured with these router's wirelesssettings. Then the laptops/desktop computers can communicate with your wirelessrouter.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default PW (write it down and putit in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.

To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

May 13, 2011 | Linksys WRT120N Router

1 Answer

I set up my WRT120N router. My desktop is connected to the internet with the provided ethernet cord, but my friend's macbook cannot connect wirelessly. He keeps getting a "timeout" message. ...


You Linksys wireless settings ie. SSID and encryption etc these settings are needed to configure the wireless card in the MAC so it can connect to the Linksys.

Dec 04, 2010 | Linksys WRT120N Router

1 Answer

I just bought a wrt120n linksys router, i used the cd installation setup to configure it. Once i was done with the configuration, i can only get connection to the internet through wireless and not by a...


Hi Friend,

We need to configure the wireless and router settings manually. Wireless settings configured with the CD wont last for too long.

Turn on the router and make sure every wire is connected to its actual place.
At the back of the router there is a small RED/BLACK button, push and hold that button for 30 seconds. Release the button and turn off the router for 30 seconds. After 30 seconds turn it on and wait till the power light is steady.

1.Type 192.168.1.1 in the web browser and hit enter
2.Enter the username and password(password is admin and leave the username blank)
3.Click MAC Address clone which is just below Setup alongwith basic setup
4.Select the Enabled button and click "Clone My PC's MAC.
5.Click Save settings
6.Click Wireless and fill the sections as mentioned
Slect the Manual Configuration button(after selecting you will get a different page)

Network Mode-Mixed
Network Name-As per your choice
Channel Width-20MHZ only
Standard Channel-11
SSID Broadcast-Enabled and click Save Settings.

7.Click Wireless Security and fill the sections as mentioned;
Security Mode-WEP
Encryption 40/64 bits 10Hex digits
Key1-Enter 10 digit or 10 letter password(example-your telephone number) and click Save Settings

8.Click Advanced Wireless Settings and fill the sections:
Beacon Interval-75
Fragmentation Threshold-2306
RTS Threshold-2307 and click Save settings.

Turn off the router for 30 seconds and turn it on. you will be able to access the internet through cable.

make sure you put the internet wire(coming from the modem)to the WAN/internet port of the router and your computer to any of the four LAN p orts.

i hope this will resolve the issue.

Regards
Chiranjeet

May 27, 2010 | Linksys WRT120N Router

Not finding what you are looking for?
Linksys WRT120N Router Logo

367 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2276 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

mark

Level 2 Expert

108 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...