Question about Other Network Devices

1 Answer

Unable to connect to wireless network

Just recently my laptop(Asus X52 Series) stopped connecting to the wireless network, it usually connects to. Message error for belkin said " the setting on your computer dont match the requirements of the network". So I removed the network, then I got excellent signal, no connection and asking for a security key. So I went to the host computer and saved the settings via usb and there was a message saying that the security key was incorrect. So I entered it in manually and it still wont accept it. Have no idea how to fix this. I have a friend who brought her laptop over and she is able to connect to the network with no problems. Can you help. As I have never had this problem before.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 144 Answers

Check your network IP and put one in the same classe of the wireless network. For example if you router IP is 10.0.0.254/255.0.0.0 then you must configure your IP like: 10.0.0.1/255.0.0.0 (instead of "1" you can choose a number between 1 and 253)

Posted on Nov 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I'm unable to connect to my push2tv netgear box. I could connect fine with my Toshiba Sattelite (Best Buy Blue model). However, I'm unable to connect with a Toshiba Sattelite M645-S4070. It has Win 7...


Sounds like you have a firewall problem either with the Windows 7 built-in firewall or an anti-virus application firewall. Do you have an Anti Virus program installed?

Nov 24, 2010 | NetGear Push2TV TV Adapter for Intel...

1 Answer

Plug and play to wireless internet connection set up?


If you have wireless/switch/router check if the wireless connection is enabled. Some of the devices by default has wireless disabled. While you are on the cable do that setup, and then go for wireless. Take care of the password if the connection is secured.
Also check if the laptop wireless card is enabled.

Good luck

Apr 02, 2010 | Other Network Devices

1 Answer

Unable to log in on network. Error message ''The domain can not be found'' what is the cause of this. Have logged in as Local Administrator to find IP address 169.254.0.21. How do I fix this


If this problem just started on a network that was working try resetting (unpluging) the router and modem. Another option is to do a "repair"
I assume this is a wireless connection.
Open your wireless network connection and go to the support tab.
Here is where you can do a repair. This will reset your network adaptor.
Try this and it should solve the problem.

Nov 08, 2009 | Other Network Devices

1 Answer

I cannot get wireless to work on my comouter. I can get the internet via cable from computer to wireless box. My laptop works ok on wireless. I changed my wireless router from netscape to Thompson speed...


Hi,

Follow the steps below to configure settings:

1. Right click on My Computer icon and go to Manage.
2. Go to Services then go to Service and Applications.
3. Double click on Wireless Zero Configuration.
4. Change the Start Up Type to Automatic and click on Apply.
5. Click on Start and press OK to close the window.
6. Go to 'Control Panel', Click on Classic View in the left hand side menu and then open 'Network Connections'.
7. Right-click on the wireless Network Connection icon and select 'Properties'.
8. Go to the 'Wireless Networks' tab.
9. Check the option 'Use Windows to
Configure this Wireless Connection' and click 'OK'.

Now please perform the following instructions to connect to the wireless network:

1. Go to 'Control Panel', Click on Classic View in the left hand side menu and then open 'Network Connections'.
2. Right-click on the wireless Network Connection icon and select 'Properties'.
3. Click on the 'wireless network' tab.
4. Under Preferred networks if you see any name in the list then highlight the name and click remove. Click OK.
5. Right-click on the wireless Network Connection icon and select 'View Available Networks'.
6. Look for the SSID (aka Network Name) of the Wireless router or access point.
4. Highlight thee SSID from the list that you want to connect to.
5. Type the security Key here and click on the 'Connect' button.
6. You should have successfully established a wireless network connection.
let me know if you need any further help.

Sep 09, 2009 | Other Network Devices

1 Answer

Wireless switch not working


Sometimes when you bootup and the error message = "wireless connection has limited or no connection", or has a red X on the wireless icon, it is because the router has not issued an IP address to the wireless card. Right click on the wireless connection and then click Repair.
If this doesn't work then reboot the router then the laptop, this should fix the problem

Sep 02, 2009 | Other Network Devices

1 Answer

Internet connection with Sony VAIO VGN-FS115B


Try reinstalling the Wireless LAN driver

Aug 03, 2009 | Other Network Devices

1 Answer

Create a local area network


you can get a HP x175 printserver. (not expensive.) and connected it between the printer and the router. that way you don't have to have the desktop on all the time.

Dec 02, 2008 | Other Network Devices

1 Answer

How do i build a local area network in windows xp?


On the machine that the printer is connected to go to Start>Control Panel>Printer and Faxes>Right click the Printer that you want to Network and Left Click Sharing> Select the Option to Share the printer and Name it something that you wil remeber. On the Laptop go to printers and Faxes select add new printer and select Network Printer. And Choose the second option Put the Name of the Computer that the printer is connected to and then printer name. Example \\Desktop\HpPhotoSmart 8100. Also you will need to check to make sure that both machines are on the same Domain\Work Group. Go to Start>Control Panel >System>Computer Name Tab ( Here verify the Machines Name)> Join or Change Domain>Put the machines on the same Workgroup if they are not, Do the same on the laptop. To test this, on the laptop go to Start>run and type \\Desktop Name and you should see what is able to be shared. Walk thru the steps above to install the printer on the laptop and have the intall cd in the laptop to install the drivers and you should be good to go. I hope this is understandable. If not feel free to email me at smichael@phoenixschool.net and I will see if I can clarify this for you. Happy networking!

Dec 02, 2008 | Other Network Devices

1 Answer

I need to connect a real router with more ports to it 4-2 pcs


Connect the LAN port on the Barricade to the WAN port on your wireless router. The Barricade should be "plug-and-play",
i.e., no need to configure it. Similarly, the WAN port on the wireless-router is plug-and-play, so it should automatically get an IP-address from the Barricade.

Use an Ethernet cable to connect the network-port on your computer to one of the LAN ports on the router.
Then, start Internet Explorer, and connect to the web-server "inside" the router. Run the "Wired Network Setup Wizard", and then the "Wireless Network Setup Wizard". When you're done, then your "wireless" device(s) (iPod Touch, laptop, XBox360) should be able to make a wireless connection.

Note: no need for any CDs to "install" anything.

Sep 23, 2007 | SMC Barricade SMC7401BRA (SMC7401BRA-ADSL)...

Not finding what you are looking for?
Other Network Devices Logo

Related Topics:

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Other Network Devices Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

CheckitRight
CheckitRight

Level 3 Expert

1352 Answers

Coss

Level 3 Expert

1043 Answers

Are you an Other Network Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...