Question about D-Link DI 514 Wireless Router (DI-514)

1 Answer

How to activate wifi 802.11g;ADSL2+Router

Dear Sir,
I was provided with Dataone broadband WA3002G4 router.

Now I am using it as a normal router with wired connections for internet.

How to use it for wire less connection for internet?

Posted by on

  • kamthaniya Mar 30, 2009

    Dear Sir,

    I was provided with BSNL Dataone broadband WA3002G4 router.



    Now I am using it as a normal router with wired connections for internet.



    How to use it for wire less connection for internet?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Switch on modem, computer. launch internet explorer. type http://192.168.1.1 in tool bar. You will get prompt for log in. log on id is admin, password is 0000. now, you will get connected to modem. On left side list, you will see "Wireless". Click on this. you will get to Modem wireless basic page. Tick "enable wireless",change country to India,click save/apply. Now open control panel on your laptop. You will be having wireless network tool / wizard. Click on this, follow the prompts to connect to the wireless network that gets detected automatically.

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not able to browse the sites using Netgear DGN2000 router...


May be good to disable all additional settings. e.g. firewall or Port forwarding. I am assuming that you are able to authenticate (connect with user id + password) as you mentioned youtube works fine. So in that case, there shouldnt be a basic issue but more of a port forwarding or nat. Also check your laptop for any setting changes or personal firewalls.
Try pinging local gateway, then DNS then any international website. Based on that you can focus on the problematic area.

Apr 07, 2014 | NetGear DGN2000-100NAS Router

1 Answer

I wanna block a website by beetel 450tc1 adsl2+router


what is the username and password for airtel wifi modem
450TC2 model i need to block some sites please help me

Jan 03, 2012 | Routers

1 Answer

Sir i have reliance broadband nd i want to connect with beetel(450tc1)adsl2+router.how can configure it?plz tel me sir. Thanks....


please explain better whats a reliance nd?
by the way you need to connect the dsl port to the phone line
wire a pc to a lan port and boot you will get an ip address then you can run a command prompt type ipconfig that will give you a the default gateway address thats the router address
type that address on the browser , that will take you to the router log in page insert name and password for router
if has a configuration wizard follow that for the PPPOE settings or dsl settings put your client ( username ) and password for the internet connection ( provided by internet provider reliance ) save the settings reboot both the router and PC an that should do it

Jul 29, 2010 | Routers

2 Answers

Compatibility with high speed ADSL2 Broadband


Yes, Linksys WRT160N is 100% compatible with ADSL2. Linksys WRT160N is a Broadband router.

you will not be able to use the linksys WRT160N, as an ADSL2 modem router. you should be using an ADSL2 Modem separately and connect the cable from the modem to the Linksys WRT160N. Hope this clarify the doubt.


Apr 02, 2010 | Linksys WRT160N Wireless Router

1 Answer

My dataone WA3002G4 (BSNL) modem is not connecting to internet


You need to configure the pppoe connection in the modem.

Jul 08, 2009 | Routers

1 Answer

My dataone WA3002G4 (BSNL) modem is not connecting to internet


This sounds like you need to set up your main gateway or WAN port settings on the datatone to match what your ISP provides? Is it possible to get suggested settings from the ISP?

Jul 08, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

My dataone WA3002G4 (BSNL) WiFi router keeps resetting


Try to upgrade the firmware of the router.

Apr 21, 2009 | Routers

1 Answer

Network sharing


go into the TCP/IP protocol properties where we have option to obtain IP address automatically. have only one system with IP address and the remaining 3 systems select obtain IP address automatically. It will work.

Mar 09, 2009 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

How to configure paradign modem adsl2 6211-A3-304 in bridge mode for BSNL Dataone Broadband connection


I belive with this modem you will:
1.Access the interface, generally http://192.168.1.1/
2. Go to Advanced on the left.
3. Select WAN.
4. Now you may see several rows of info, look for the one that says PPPoE, and then click edit to the far right.
5. Select Next one time.
6. Here select "BRIDIGING".
7. Click next all the way to the end.
8. Reboot, after you clicked save of course.


This is how you bridge 98% of PPPoE providers with a similar paradign modem.

Of course the next device in line will have to provide your username and password for your DSL connection.


Hope this helps!

Feb 08, 2008 | Paradyne (6211-A2-200) Router

3 Answers

BEETEL 220BX ROUTER


First login to your Router using default username and password
2. Click on WAN on the left side menu
3. You'll have options to add or remove configurations.
4. Please select and remove the bridge config as BSNL does not support Bridge.
5. Please click edit on the existing PPPoE Airtel Configuration
6. Set the VPI=0 and VCI=35 (for Airtel it would be 1,32) and click next
7. Select PPP over Ethernet (PPPoE) and encapsulation type: LLC/Snap Bridging and click next
8. Enter the following details:
PPP Username: Your bsnl username (no need to add dataone.in)
PPP Password: Your bsnl password
PPPoE Service Name: DataOne
Authentication Method: Select CHAP
Click Next
9. Check the Enable IGMP Multicast Option
Check Enable WAN Service Option
Enter the Service Name as Dataone
10. Click Next and Save. You should also save and reboot your modem.
If doing the above does not works, check if you have anything set Under TR-069 Client and remove all entries in this section however it may not allow you to save so you may just put the ACS URL as ( it won't accept this field to be blank so just enter any thing, I entered http://bsnl). Save and reboot the router. Should be online now.
let me know if anyone benefited from the above information - abialexin@yahoo.com

Jan 14, 2008 | Routers

Not finding what you are looking for?
D-Link DI 514 Wireless Router (DI-514) Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...