Have a JVC AV-65WP74 that had convergence issues. Replaced the chips and one burnt resistor, no problem. Color is much better and I can fine tune the red in the manual convergence menu, but I do not have...
Been there, done that---JVC remotes are very expensive. I repair these sets as a sideline and I have a Samsonite case full of remotes--get your hands on the correct remote--check the flea markets or even EBAY.
I have a 57 inch someone gave me, told them unless that included the remote, forget it (it was the only major remote I did not have) Most of the remotes are 50 dollars or more at the wholesale level--check out EBAY as I have seen them there for much less.
If you lived in San Diego, I would loan you mine.
If replacing the chips and the usual one resistor made it better you just have to get into the tech menu and adjust and SAVE the adjustments--in the customer menu it does not save and if power is interrupted it may go back to whatever it was before you adjusted it.
Let me know if I can be of any help--I am here to help and have a lot of experience with these sets. My hat is off to you--not everyone can do that repair (yes, it is easy as the chips are up front) and you just need to go one step further. The exact or correct remote will allow you to do other things.
What I do in my own situation is keep the original remote in my case and use a universal for basic things.
REGARDS, SD TECH
Aug 17, 2010 |
JVC AV-56WP30 56" Rear Projection...