Question about Powerfast Stanley TR110 Light-Duty Staple Gun

3 Answers

LOAD IT HOW DO U LOAD THIS STAPLE GUN? I PUT THE STAPLES ON THE "ARM" THAT SLIDES OUT FROM THE BACK OF THE STAPLER, ADN WHEN i CLOSE IT, I CAN HEAR THE STAPLES MOVING BACK AND FORTH, THEREFORE I KNOW IT'S NOT LOADED RIGHT. IT WON'T SHOOT ANY STAPLES EITHER

Posted by on

  • Anonymous Apr 26, 2009

    same problem.

  • Anonymous Mar 28, 2014

    it staples once and then stops. If i take the cartridge out and put it back in, it will staple once and then stop

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Pull out the spring at the end of the gun. turn the staple gun upside down. Lay the staples in the track pointed side up, push in the spring slide so that it locks. You are ready to staple.

Posted on Dec 07, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Turn it upside down and lay the staples in ...You'll see, it makes sense when you see it.

Posted on Jun 07, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 242 Answers

On this model, there should be a spring on the arm. Compress the spring and put the staples in. When you close it, the metal part on the end of the spring holds the staples tight.

_____
I
I
I arm and spring below
I___
___I staples here I_____))))))))))))))))))))))))))))))))))))))))))))))____[___]

Posted on Nov 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I load the stapler?


No you don't. We answer most things here.

If the stapler is like any of these

http://www.amazon.com/s?ie=UTF8&page=1&rh=i%3Aaps%2Ck%3Abostitch%20staple%20gun

You push the back in slightly to unlatch it and then drop it down a bit and the staple pusher comes out completely.

Jan 28, 2016 | Heavy Duty Stanley Bostich Heavy-duty...

1 Answer

I have a stanley heavy duty stapler TC110. When I put my staples in, they don't seem to be catching. There is some black part sticking out of the end where the staples should come out. It looks like...


The staples load on the underside of the stapler.
Step 1 Push down and retract the stapler pushup mechanism.
Step 2 Position the stapler so that the moving hammer handle is down
and the staple exit is up
Step 3 Load the staples into the chamber on the bottom with the points up.
Step 4 Push the pushup mechanism into the locked position until it latches, you will feel the spring resistance as the staples are pushed into place.

Sep 04, 2011 | Powerfast Stanley TR110 Light-Duty Staple...

1 Answer

How do I load staples into my JT21 staple gun?


At the end of the stapler opposite where the staplers are driven out is a release.

Push it in and turn it and it should come out with a long spring

Load your staples, put the spring back and lock it.

Aug 31, 2011 | Arrow Fastener Co. Lt Duty Staple Gun -...

2 Answers

I have an ACE aircraft aluminum stapler... I bought Ace Heavy Duty Staples 3/8" 10mm Narrow Crown Arrow T50 staples but cannot get the arm to load with them on it.


Possibly you are trying to load it from the back with the arm out. This way does not work. With this stapler you must pull the arm out all the way and then drop the staplers in the bottom. Too easy, right? I felt like a dumb a$$ after fighting this one for an hour. By the way, it will take heavy duty staples but you need to match the item codes printed on the side of the stapler with the box at ACE hardware. Hope this helps... Say "yes" to "was this solution helpful?" so I can know that im not the only one who did this wrong :)

Jan 09, 2011 | Ace Hardware Ace Staple Gun

1 Answer

I loaded the stapler as described above. Now I hear the staples sliding around inside the casing. I loaded as many staples as the gun will hold. I pressed the handle down and three staples came out at...


You need to load just enough staples in it that when you put retaining spring and clip back in that it will let catch on back of spring to go into slot in frame. I hope this helps. Thank you

Nov 19, 2010 | Arrow T50P ARROW STAPLE GUN

1 Answer

How do I load JT21 staples into a Arrow JT27 Stapler gun?


I was having the problems everyone listed... with the staples loading & firing... I guess the instructions are lousy .. should be ON THE PACKAGE to make it clear.. but.. on the stapler itself on the bottom.. it explains how to correctly load.. you don't put the staples on the piece that slides out.. you slide it out, load the staples in the open tunnel ..then slide the piece back.. that piece is the spring loader... since i finally figured it out ( by coincidence that I turned it over & noticed some faint words printed) - it works PERFECT every time! great little stapler... please fix your directions... seems to be a common misunderstanding!!!

Nov 07, 2010 | Arrow T50P ARROW STAPLE GUN

1 Answer

Problem loading gun..Where do we put in the staples and change the dial to accomodate it? fred


The staples should load in through the end of the hammer stapler. The end is spring loaded to push the staples forward, so push the end - usually a crome square - into the handle end then move that part up approximately 1/4 inch and pull back. The spring mechanism should slide out so you can add new staples. These staplers take a specific size of staple and a certain number to allow you to put the spring mechanism back into the stapler. If you do not know the correct size for your stapler someone at your local hardware store can help you find the correct size and they will probably even show you how to load it. Good luck!

Jul 07, 2009 | Ace Hardware Ace Heavy Duty Staple Gun...

2 Answers

How to remove jammed staples in staple gun?


Take out the small bolt that is secured with a nut at the back of the gun (at the end where you feed the staples) -- then drop the inset. Now you have access to the jammed area. Clear out jammed staples and put the stapler back together. Easiest way is to hold the nut and turn the bolt from the other side.

Jun 16, 2009 | Arrow T50P ARROW STAPLE GUN

1 Answer

Can't remember how to load staples in my power shot stapler.


power shot guns have dif crown widths bring the gun to home depot or lowes and match them up or get the model # off the gun

tom

Dec 08, 2008 | Ace Hardware Ace Staple Gun

2 Answers

Refilling the staple gun


The staples do not go on the bar you pull back but directly into the bottom once you have pulled the bar back. I was trying to put the staples on the bar at the back and push them into the stapler.

Oct 10, 2008 | Arrow 8000 Power Shot Pro Staple & Nail...

Not finding what you are looking for?
Powerfast Stanley TR110 Light-Duty Staple Gun Logo

2,592 people viewed this question

Ask a Question

Usually answered in minutes!

Top Powerfast Tools & Hardware - Others Experts

John Trevino

Level 3 Expert

1378 Answers

Brad Brown

Level 3 Expert

13819 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2717 Answers

Are you a Powerfast Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...