Question about Mercury KVM266PM-U (KVM266PMUD1600) Motherboard

1 Answer

Pc problem when i switch on my computer message shown: out of freqency

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Offhand would suggest you try starting in Safe Mode and in your Display Properties, lower down the Screen Resolution and/or the Screen refresh Rate. Thereafter try again, if not corrective, you may need to check video card, memory, cable or the try the monitor in another computer.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.

Posted on Nov 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

PC wont boot up to Windows XP


Can you offer Make/model?
Is this the BIOS message for the monitor that is shown when no input is found?
Do the lamps on the PC come on? Does it "sound" like it's starting?
Do the keyboard lamps operate, e.g num lock

Nov 30, 2013 | MSI Motherboards

1 Answer

I have


Really? Wow!

1) Is the spring clip in the CMOS battery holder, weak, or has it been bent?

2) + of battery is facing UP, right? (Positive = + )
Don't know if it would even work in the other direction, but you learn something new everyday.

3) CMOS battery holder soldered tightly to the motherboard?

The motherboard mounts to a Support Plate.
The Support Plate can be part of the computer case, or a separate plate that is mounted to the computer case.

4) Is there dust in-between the Support Plate, and the motherboard?
You know, -> 'dust bunnies'.

Post back in a Comment.
Regards,
joecoolvette

Jul 29, 2012 | Motherboards

1 Answer

Computer doesnt boot usb


Can you boot from the hard drive?

When you turn the computer on watch the screen for which key to hit to Change the Boot Order or Boot Sequence then hit that key. You have to hit the key when the message is shown or you will have to start over.

The screen will also show you which key to hit to get into the Bios or System Setup. You have to hit the key when the message is shown or it will not work and you will have to restart.

May 28, 2012 | Dell WF887 - Dell Dimension 1100, B110...

1 Answer

I am using a Dell lap top with Windows Vista to connect to a NEC VT590 projector. I want to show a PowerPoint presentation. As the computer is booting, the computer monitor is blank and the loading...


You need to configure the projector as a second monitor as explained here
http://www.online-tech-tips.com/windows-vista/multiple-monitors-vista/

Feb 02, 2011 | Motherboards

1 Answer

Intel 845 GL mother board no display ;processor memory & SMPS are working fine in another mother board


Does it have any beep sounds on switching on( some computers won't produce beep sound) or does your monitor is not getting any signals from computer even though it is ON and has shown any message or menu screen of Monitor functions then,
You will be having a faulty RAM or your Graphic port has some hardware malfunction.Or it can be also from a new unsupported hardware installation that will prevent computer from booting up.

If your monitor does not provide any of the above monitor functions successfully then
It would be a monitor problem. Check wires or cables of monitors or contact nearby technical support

Sep 06, 2010 | NEC Galileo 845GL (N4-IBFGL) Motherboard

1 Answer

I have a Maxidata msi 865GM3-LS (ms - 7037 Ver:1) Motherboard , have two hard drive as master and slave. Suddenly when opened the pc, I got a message disk boot failure and unable to ...


Not shown in BIOS!!!
How old is that hard disk?
Have you been receiving messages showing "SMART error" or something like that?

If yes, hard disk can be damaged.

Aug 11, 2010 | MSI 865GM3-LS (MS7043020) Motherboard

1 Answer

Error Message on 1st page boot up


Hi Chris,
Reset the bios jumper on the board. Use your manual, go to the bottom of page 9. Please unplug the power cord from the PC.
Clear the cmos/ bios & remove the bios battery as well. (You may use a small flat tip screw driver to help lift the battery out). If you have a voltage meter check the battery for 3volts DC. (If you have a voltage meter suggest you check the battery for 3volts DC while its out).
Re-place the bios battery & reset the bios jumper back to Normal. Re-connect the power cord to the PC. Boot the system & enter the bios menu. Adjust all your setting as needed.
(DO Not over-clock anything)!
If you still receive an error message your only other option would be to flash the bios. Even if you have the latest bios software already installed. The current bios software may be corrupt.
http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=537&CategoryID=1&DetailName=Bios&MenuID=48&LanID=0

Good luck Chris!

Mike

Nov 06, 2008 | EliteGroup RS482-M754 Motherboard

Not finding what you are looking for?
Mercury KVM266PM-U (KVM266PMUD1600) Motherboard Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Roshan Rijal
Roshan Rijal

Level 2 Expert

361 Answers

Are you a Mercury Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...