Question about Mag Innovision LT776s 17" LCD Monitor

1 Answer

No Display I have a blank screen when booting up computer, however I do have a blinking green power light? I tried hooking up the LCD screen to another computer and still no picture. Thanks, Phil

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: No Display

I have the same problem - the blank/black screen and blinking green power light. The speakers on the monitor work (I can hear the start-up sound that Windows makes), but the screen is blank. We bought the monitor on Halloween Night 2003 at Best Buy and had zero problems to date...except for last night. The Best Buy gang told me this afternoon that it was an internal hardware issue. I called the manufacturer and the tech guy confirmed the problem by saying he was almost positive it was the internal "inverter board" - which means you have to send it in to get it fixed. I guess this is a fairly common problem with these monitors by the way he made it sound. So, that's a $70.00 deal (service, parts, labor, and shipping back to your house) - that is, if there are no other issues with the screen itself - then the cost goes up. So by the time you pay to send it to them and then pay them to fix the board - it looks like you're better off buying a new flat panel monitor. Yikes. Anybody else with any suggestions - other than buy a new one? Thanks!!

Posted on Nov 02, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hp l1906 LCD MONITOR SCREEN WONT DISPLAY. power lcd green light keep blinking. Any solution? thx

It is possible that the video card in cpu is bad, try hooking up another monitor to the cpu (computer) if you have one that will let you know if it is the monitor or the computer video card, Could be as simple as the driver is missing.

Feb 01, 2010 | HP L1906 19" LCD Monitor

1 Answer

Green light blinking , no display ,,

look inside for bad caps, see example of failed Viewsonic monitors here:

You should have 5v and 12v in the power supply sections.

Jan 17, 2010 | ViewSonic : 19" Graphics Series Flatpanel...

1 Answer

Screen is blank. Green LED power light is

Might be your graphics card, try swapping it out for a new one and see if that works

Oct 09, 2009 | Dell E173FPb 17" TFT LCD Monitor

2 Answers

Blank HP w1907

If the power light does not turn color and stay's green on startup, it is not a power problem. It is most likely the inverter. If the unit is in warranty, send it out ASAP. Contact HP customer care by email and have the issue logged in.
If in warranty, they will send you a box by FedX second day and have repaired.
This is a 19" monitor and will not be worth paying for repairs if not in warranty.

Sep 03, 2009 | HP w1907 LCD Monitor

2 Answers

Acer AL1716 Blank screen & blinking green power LED

You've got a busted backlight inverter... Need to replaced a new one...

Dec 17, 2008 | Acer AL1716Bbd 17" LCD Monitor

1 Answer

LCD monitor goes blank

It appears that the display resolution set in your display properties is out of the range that the LCD can display.

Try this.

Boot to the ENABLE VGA MODE by pressing F8 to get the Windows Boot Menu. If you can get to the desktop, then go to display properties, and see if you can change the resolution to higher settings and maintain video. (If the video blanks out, then it should revert to the previous setting in 15 seconds)

Aug 03, 2008 | Gateway FPD2275W LCD Monitor

1 Answer

AL2216W LCD monitor "Power status Green blinking" & No display.

LOOKS LIKE A BURN SOLDER !! , open the monitor , check the PC BOARD around the transformer area , look for burn spot or cold solder , RE solder it , try again , hope this helps please rate solution and thanks AJ

May 06, 2008 | Acer AL2216W LCD Monitor

1 Answer

No signals. screen is blank. power green light is blinking.

Its not a malfunction. blinking light is indicator shows that no appropriate input signal detected. If you are using laptop refer your user manual to toggle to external display device. For example in most of the Toshiba Laptops requires to use Fn+F5 in order to use external display device like you have. If issue still persist you may post again by including the details of your laptop/desktop model.

Good Luck, Happy New Year

Nov 09, 2007 | Samsung SyncMaster 171S 17" Flat Panel LCD...

Not finding what you are looking for?
Mag Innovision LT776s 17" LCD Monitor Logo

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mag Innovision Computer Monitors Experts

William Miller
William Miller

Level 3 Expert

8803 Answers


Level 3 Expert

2598 Answers

Are you a Mag Innovision Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides