Question about Fax Machines
there are two ways you can rea\set the ip address you can press utility counter administrator password is 12345678 the go to network ip address and you can chane it there if you know the ip address you can browse to the machine and log in as administrator and go to network and reset there
Posted on Aug 22, 2009
SOURCE: I am using a konica
Press this button in same order and sequence
Where 0 mean zero of keypad then you see the msg "service mode" press down key and go to ADJUST and press OK press down key and go to ATDC and press OK check the value and increase some higher point again press OK press reset switch off and after some seconds switch on perform above actions until you get machine in ok condition or other otherwise you must be change the developer powder. but be sure to run atdc auto adjustment which is in SERVICE MODE-FUNCTION-ATDC AUTO ADJUST then press ok and leave the machine for complication his process,
Posted on Jan 27, 2011
SOURCE: ON KONICA MINOLTA BIZ HUB
Error 2653 = EEPROM access error - yellow image unit.
The processor of the printer no longer detects it as present during boot = you will have to replace it, it has died.
Here it is
Posted on Feb 01, 2011
Tips for a great answer:
Dec 31, 2014 | Konica Minolta Bizhub 600 750 Image...
Dec 18, 2014 | Konica Minolta Bizhub 600 750 Image...
Oct 23, 2014 | Konica Minolta Bizhub 600 750 Image...
Nov 07, 2013 | Konica Minolta Bizhub 600 750 Image...
Aug 10, 2013 | Konica Minolta Bizhub C253 With Document...
Feb 14, 2013 | Konica Minolta MINOLTA BRAND DIALTA...
Dec 15, 2010 | Fax Machines
Nov 01, 2008 | Minolta Fax Machines
Dec 06, 2016 | Xerox WorkCentre 6505DN
741 people viewed this question
Usually answered in minutes!