Question about Visioneer Strobe XP 200 Path-Through Scanner

1 Answer

VISIONEER STROBE XP22 SCANNER

THERE IS A LINE DOWN THE SIDE OF EVERY SCANNED DOCUMENT. THIS IS A NEW SCANNER (LESS THAN 2 MONTHS OLD).

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

WE DID NOT HAVE A "CLEANING SHEET" AS WAS SUGGESTED BY THE MAKERS OF THE VISIONEERS. APPARENTLY OURS DID NOT COME WITH ONE UPON PURCHASE. HOWEVER, WE WERE SUPPLIED WITH A CALIBRATION SHEET. WE SIMPLY RAN THE CALIBRATION SHEET AGAIN ...... PROBLEM SOLVED.

Posted on Nov 10, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Scan to email


  1. Place the document that is going to be scanned face down on the scanner. Press the "Scan" button that can be located on the scanner. Another way to perform a scan is to click on "Start," then go to "All Programs." Move the mouse pointer up to "Accessories." Go down to "Scanner and Camera Wizard."

  2. Click on "Scanner and Camera Wizard." Click "Next." You will be asked to choose a preference. Choose a preference, then click on "Preview" to preview the document.

  3. Click on "Next" after previewing. Type a picture name and the destination where you want to save it. Click on "Next." The document will start to scan. Click "Finish" to complete the scan.

  4. Go to your email account. Click "Compose" to start a new email. Look for "Attach File" and click on the "Browse" button across from it. The "Choose File" window will open up.

  5. Go to the destination where you saved the scanned document. Choose the name of the scanned document. Click on it to open up the file, then click on "Open."

  6. Add the necessary information in the subject line and the body of the email. Click on "Send" to complete the process. The document will be sent as an attachment file.

Feb 05, 2011 | Xerox Phaser 3200MFP/N Laser Printer

1 Answer

How do i scan to email


Hi,

1.Place the document that is going to be scanned face down on the scanner. Press the "Scan" button that can be located on the scanner. Another way to perform a scan is to click on "Start," then go to "All Programs." Move the mouse pointer up to "Accessories." Go down to "Scanner and Camera Wizard."


2.Click on "Scanner and Camera Wizard." Click "Next." You will be asked to choose a preference. Choose a preference, then click on "Preview" to preview the document.


3.Click on "Next" after previewing. Type a picture name and the destination where you want to save it. Click on "Next." The document will start to scan. Click "Finish" to complete the scan.


4.Go to your email account. Click "Compose" to start a new email. Look for "Attach File" and click on the "Browse" button across from it. The "Choose File" window will open up.


5.Go to the destination where you saved the scanned document. Choose the name of the scanned document. Click on it to open up the file, then click on "Open."


6.Add the necessary information in the subject line and the body of the email. Click on "Send" to complete the process. The document will be sent as an attachment file.

Nov 17, 2010 | Computers & Internet

1 Answer

On a scanned document there is a line down the right hand side as if there is a mark on the paper. This is not the case and is only showing on the scanned document. How do I rectify this?


This line is being caused by something stuck to your scanner glass. It simply needs to be cleaned. The scanner glass is going to be located in 1 of 2 places. Most common is location is just to the left side of the large scanner glass. So lift up your document feeder and look at the large glass where you may sometimes place an original to be scanned or copied. Now look just to the left of that glass. Do you see a much thinner "strip" of glass? If so then clean this strip glass with a soft cloth and a bit of glass cleaner or water. If there is no strip glass located here then it will be located inside of the feeder area where you documents are fed in to be scanned. These feeder units usually just pop open. If your documents go in face up the the strip glass will be on the upper portion. More common is the face down feeding which means the glass will be on the bottom. Sometimes a flashlight is handy here. Just open up the feeder unit and look for a thin strip of glass that runs from the front towards the back. It is about 1 inch wide. Once you locate it just clean it as mentioned above. Close everything back up and give it a try.
Eccentially what is happening here is that something has gotten stuck to the glass and since when scanning, the documents are "dragged" past this glass, anything that is stuck or stationary on the glass is read as a solid line.
Good Luck and Thank You for using Fixya.
WheatlandServices

Nov 09, 2010 | OKI Electric Industry C3520 Laser Printer

1 Answer

My scanner is now adding a page with a black line that runs from top to bottom of the page and the actual document scanned is page 2. But the document is fine with no line through it. Does this mean that...


Check your scanner software settings. It is probably set at duplex ever time you start to scan. That is why you get two pages for every pass, the front and the back. You must place the document in the feeder in a way that the front side of the document is page 2. You may want to flip it next time you scan. So the main question is why there is black line from top to bottom? That is because there is a piece of dirt stuck on the glass of the scanner. You see, this scanner actually does two scanning when a page runs through it: the front and the back in duplex mode. So there are two scanners in side the box. The front page scanner apparently is dirty and needs to be cleaned with clean cloth and lens cleaner.

Aug 31, 2010 | Canon DR 3060 Path-Through Scanner

1 Answer

Got a dark line down document when scanner via AFD


When you use the adf, the scanner remains stationary at the far left side of the platen. Check and make sure that the glass is very clean there; use a damp cloth to remove any dirt or other foreign material.

May 27, 2010 | Canon PIXMA MX700 All-In-One InkJet...

1 Answer

Line in scanned document


Its dirt! It takes just one tiny speck of dirt on the lens to make a vertical line.

We have some scanner maintenance videos;you want to clean the CIS front sensor.

Regards,

MyEfact

May 12, 2010 | Panasonic KV-S2026C Pass-Through Scanner

1 Answer

Line down the scanned document on a HP LAser Jet 3050


If you are scanning using the Auto Document Feeder be sure to clean the glass where the documents get scanned. A small speck will cause a line down the page. On HP there is often a narrow strip of glass on the left side of the platen glass.

Apr 10, 2009 | Brother IntelliFAX 4100 Laser Fax

1 Answer

Black line on scanned document


Please clean the glass with Isopropyl alcohol. Dont use solvents.
S. Mohan

Mar 27, 2009 | Canon DR-1210C Scanner

1 Answer

White line down side of page when scanning


If this is happening only when you are scanning using the automatic document feeder, check for something blocking light above the scanner. If you open the scanner top, look along the left side of the scanner glass where the paper is scanned by the automatic document feeder. If you see anything on the glass there, clean it with a soft cloth dampened with clean water.

Jun 10, 2008 | Canon PIXMA MP830 All-In-One InkJet...

1 Answer

Horizontal line appears in scanned document


open the scanner and remove the clips, move the lense up and clean it. it is very easy to clean.

Feb 13, 2007 | Visioneer Strobe XP 200 Path-Through...

Not finding what you are looking for?
Visioneer Strobe XP 200 Path-Through Scanner Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Visioneer Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

5186 Answers

Jeff Hogancamp
Jeff Hogancamp

Level 2 Expert

287 Answers

Cosma Papouis
Cosma Papouis

Level 3 Expert

409 Answers

Are you a Visioneer Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...