Question about D-Link DCS-5300G Network Camera

Open Question

No Signal Have had camera for several years with no problems; suddenly I can't get a picture but do get sound. I have a black screen which says no signal! Haven't changed anything in setup. Would appreciate help. Thanks. Ike

Posted by on

  • Anonymous Nov 20, 2008

    Yes i have same problem with 4 camera (DSC-5300).

    I opened the case of camera.

    camera board was damaged.

    i saw a part with 190 FP 52 no. was damaged but i don't know what is that.

    I try to asked from d-link co. but i didn't get any response from d-link.

    I think D-Link Co. only want to sale their products without any support.

    When i speak with technical men in d-link, they don't know any things about technical problems, all of them only know everythings about sales.

×

2 Suggested Answers

  • 1 Answer

SOURCE: hi guys.... problem with the dcs5300g

I have 7 DCS5300G and 1 of them got the blackscreen, since DLINK has no support at all I decided to gut the camera myself and learn a thing or two... what I found is that there is a small "capacitor" next to the lens' control board, and it was burnt... I
went to an electronic parts store and got a similar one and got it
to work again... I bet your problem is that same one...

Posted on Jun 25, 2009

jan mczeal
  • 632 Answers

SOURCE: My DLink 5300 G internet camera suddenly says "No Signal."

  1. Remove the Java update and roll it back to the previous state.
  2. If it does not resolve the issue, reset the camera.
  3. Lightly insert a paper clip or a similar sized object into the reset hole on the back of the camera, press lightly and then release the button.
  4. The LED on the front of the camera will begin blinking red and green.
  5. When the LED stops the blinking, the reset has complete.
  6. If the issue is still present, restore the camera to factory settings.
  7. Insert the paperclip or other tool and press on the button continuously.
  8. Wait for the LED on the front of the camera to blink red and green and hold the button through two cycles of blinking (about 5-7 seconds.)
  9. Withdraw the tool after the second cycle of the LED blinking and factory restore has been completed.
  10. Run the installation wizard. If you don't have the installation CD, go to the manufacturer's website and download the software.

Posted on Nov 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Screen/pictures are black


Sounds like your screen has died. Check with an authorized Nikon dealer.

Jul 04, 2014 | Nikon Coolpix 7600 Digital Camera

2 Answers

Benq FP737s - Not working suddenly - Black screen


Most like just burned out and needs repaired or replaced.

Nov 11, 2007 | BenQ FP737S-D 17" LCD Monitor

1 Answer

I have a Samsung SL620 which has worked perfectly for several years. Now when it's turned on, all you see on the screen and on the last picture taken are distorted red/purple/black vertical lines.


All things break down and if you have had the camera for several years then maybe its time to invest in a new one. It sounds like it doesnt owe you anything. You can buy the same camera if you really like it only it will be a more modern version

Oct 08, 2010 | Samsung Cameras

1 Answer

Image goes to black on Sharp flatscreen.


An LCD unit? Sounds like the backlight is failing. When it goes black next time, use a strong light next to the screen and look for a faint image on the screen....

If it is the backlight, its a service shop issue.

Mar 23, 2010 | Sharp 19 in. LCD HDTV

1 Answer

Canon SD 550-- sensor problem? Bought 3/2006 and have had no problems. Suddenly, LED screen went black--shows nothing and cannot take a picture altho will flash and record black picture. Shooting...


The shutter of the camera is not opening that is why every picture taken is recorded black. It is a mechanical problem and probably has nothing to do with the sensor. Not very expensive

Aug 30, 2008 | Canon Cameras

1 Answer

Display screen not working, picture display not working


If you press the display button it might make the pictures show up. I went on a trip to NYC last year right after i bought this camera and suddenly the pics weren't displaying and i was bummed because i thought that i had broke but after :( the trip i figured out that that was what the problem was.

Apr 21, 2008 | Canon PowerShot A530 Digital Camera

1 Answer

The screen is black and won't take pictures


Many times when the screen is black, that means no signal is getting to the lcd from the ccd. Some cameras had a ccd problem, and may be fixed by the maker, for free. Nikons, Canons, Sony, and others have had this problem in the last few years. The ccd had internal problems and the same sensor was used in many point and shoot cameras. If you want to search this, search on the net for Service Advisory, or Service Notice. Some companies may have another way title this problem

Feb 12, 2008 | Nikon COOLPIX L3 Digital Camera

1 Answer

Black LCD screen on camera


Just had the same problem (black display). I moved my hand in front of it and took pictures of things but nothing happened. Then my girlfriend tried to point it to a lamp, and all-of-a-sudden it kinda woke up from a screensaver or something. So weird, but it worked. Perhaps it needs enough light in order to start using the display and lens. I couldn't take any pictures when the LCD was black. So, try pointing it towards a strong light source before you break your camera.

Aug 30, 2005 | Pentax Optio 330GS Digital Camera

Not finding what you are looking for?
D-Link DCS-5300G Network Camera Logo

Related Topics:

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...