Question about HP Officejet Pro L7780 All-In-One InkJet Printer

2 Answers

L7780 All-in-One Document feeder will not pickup paper

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem, Lift the scanner lid there are directions there. my printer is new and apprently there is a blue thing there that the was on top of the scanner you need to make sure its under it. can't explain well eh sorry, but there are directions under the lid check it out.

Posted on Mar 09, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 344 Answers

L7780 is a very new printer and could still be under warranty. I would check with http://www.hp.com before I tried to repair anything.

Posted on Nov 07, 2008

1 Suggested Answer

sayer268
  • 147 Answers

SOURCE: When making copies, auto document feeder picks up

open the top cover, on the very left there is a part that can be removed (running front to back) I believe you will see a scrap of paper iunder there. remove the paper, replace the part and try again

Posted on Jan 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When making copies, auto document feeder picks up paper and rollers squeal but paper gets stuck on underside. If you lift the lid about an inch the paper will feed through. HP Model L7780


open the top cover, on the very left there is a part that can be removed (running front to back) I believe you will see a scrap of paper iunder there. remove the paper, replace the part and try again

Jan 03, 2011 | HP Officejet Pro L7780 All-In-One InkJet...

1 Answer

The document feeded is not pulling the paper. What should I do? Do you have this part for sale? How much?


Is this happening on TOP Feeder or Actual Paper Tray..

Turn off the printer
Remove the TOP ADF Cover and Clean the Rollers with lint free cloth
Remove the Rear Access door and clean the Rollers

Close the Doors and turn on the printer.

Jun 23, 2010 | HP Officejet Pro L7780 All-In-One InkJet...

1 Answer

The auto document feeder does not pick up the paper


The pickup roller is probably dirty. Take a clean sheet of paper and put a small amount of rubbing alcohol at the end. Take that same end and place it in the automatic feeder and attempt to feed through for a few times. This should clean the pickup roller and allow paper to be picked up. Wait a few minutes for the alcohol to dry and attemt to feed a clean sheet of paper. You might need to repeat the process a few times

Jan 21, 2010 | HP Officejet Pro L7780 All-In-One InkJet...

1 Answer

Can not find were paper is installed.


Here is the manual for the printer please look at page 13 and then number 13 on their list show the document feeder or where the paper is loaded at the top of the printer i would suggest you download the whole manual so you can see the rest of the features of this printer aswell http://h10032.www1.hp.com/ctg/Manual/c00863866.pdf

they also have a setup manual here
http://h10032.www1.hp.com/ctg/Manual/c00862808.pdf

Jul 08, 2009 | HP Officejet Pro L7780 All-In-One InkJet...

1 Answer

The auto-document feeder on our HP L7780 OfficeJet Pro printer doesn't pick up the papers anymore. The 'gears' are spinning, but the papers aren't advancing. I've cleaned the rollers, but that still didn't...


I put an elastic band around the black roller as it doesnt seem big enough and it works nearly every time now. Have done this with another L7780 Pro as well which fixed it completely on that one.

Jun 09, 2009 | HP Officejet Pro L7780 All-In-One InkJet...

1 Answer

Auto document feeder


Did you make sure the tape is removed inside the Document feeder,or maybe you need to check to see if anything is stuck in the rollers. Open the door (if you have not already done so) to the document feeder and you will see pictures on the inside showing how you can remove and/or change the roller (make sure everything is put back as the picture. Good luck, I hope that is all that is wrong with it.

Dec 26, 2008 | HP Officejet Pro L7780 All-In-One InkJet...

2 Answers

Document feeder


Its most likely to be the pickup roller and separation pad which will need replacing. as a short term fix try cleaning them with some isopropyl alcohol

Sep 22, 2007 | HP OfficeJet 7310 All-In-One InkJet...

Not finding what you are looking for?
HP Officejet Pro L7780 All-In-One InkJet Printer Logo

Related Topics:

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96576 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...