Question about Sylvania SRT2420P TV

2 Answers

Sylvania SRT2420P no picture no sound

This morning, I turned on my Sylvania SRT2420P with the remote, it came on, then the screen turned black with a wide grey fuzzy screen, then nothing. No picture, no sound. Sears now has this model for about $120. Is it worth getting fixed, or should I just buy a new one. My telly is 2 years and 5 months old.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 68 Answers

With the TV disconnected from the mains, remove the back. Clean out dust with an artists long wooden handled brush, see if anything is burnt or blackish. Do not disconnect anything to do with the Tube. Check for any disconnected wires. If all looks well, you may try it with the back off, but do not fiddle with anything in the back, while switched on. Look at the tube base just in front of the Printed Circuit Board attached to the tube base. You should see a glow from the three filaments which heat the cathodes. If there is the tube is still OK, But the line timebase has stopped working. If nothing is working look for blown fuses. Do not just replace them, but let a service engineer know, or write to FixYa again giving more information and your own capability.

Posted on Oct 19, 2006

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 337 Answers

Now days the tv's are not expensive as they used to be however the repair charges have not changed much therefore you will be looking at more than half of the price of a new one.It might be better to invest in a new set.

Posted on Oct 18, 2006

  • Omar Urrutia
    Omar Urrutia Oct 18, 2006

    Your rating response is important too.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My flat screen Sylvania TV is flashing different colors what's wrong


Better late than never. The problem is that your TV is in the service mode. There are many ways this can happen. But, lets just get down to fixin this! With the original remote and the TV on. If the TV will not shut off, do this. Press the left cursor button on the remote, followed with pressing the right cursor. Power off the TV with remote, or press off button on TV.

Secondly, your TV will power on and off. But you have flashing colors. Do this. With the original remote and TV on. Press the up cursor button, on the remote, followed with pressing the down cursor. Power off TV with remote, or press off power of TV. Thanks for asking me, Matt of Martins TV Repair.

Jan 20, 2016 | Sylvania Televison & Video

1 Answer

One For All URC-3021 Remote Control for Sylvania SRT2420P


These are the setup codes for Sylvania Brand TVs with URC-3021 remote control. If you want more details about setup proceedings and others, check this link. It has these details to many brand of remote controls.

Jan 20, 2013 | One For All URC-3021 Remote Control

1 Answer

Is the sylvania srt2420p digital tv ready?


Download its user manual, and check its specification page. It will have all details. Click here to download the manual in PDF.

Apr 28, 2012 | Sylvania Televison & Video

1 Answer

I need the codes for universal control


Hello

Three digit Universal Remote codes fro Sylvania are:-
004/ 008/ 009/ 062/ 068/ 069/ 074/ 075/ 076/ 077/ 133/ 161/ 163

Four digit universal remote codes for sylvania are:-
0062 0004 0009 0135 0189 0183 0227 0456 0008 0068 0075 0141 0161

NB: Switch OFF and switch ON your TV with its front panel power control switch each time before trying an other code.

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand
OK.

Jan 09, 2011 | Sylvania SRT2420P TV

1 Answer

My screen shrunk from top to bottom and now is 5 inches in height


it is obviously faulty in vertical scanning section.
if you're knowledgeable on that area,look for dried capacitor which caused the problem or else find a qualified technician to fix the problem.

Jan 02, 2011 | Sylvania SRT2420P TV

1 Answer

Picture disappeared...have sound


Ur main video backlight board is dead.Must be replaced.

Oct 21, 2009 | Sylvania 6637LCT 37 in. LCD Television

1 Answer

Powers on by itself


TV worked FINE for the past 2 yrs---this morning we woke up and the screen is totally BLACK! No sound..nothing. REmote doesn't do anything to the TV. Red light says ON unless we unplug it. Remote won't turn off the TV.
Any advise? Picture tube??
Worked great w/out any problems until we woke up today!

Thanks,
Tina

Jun 01, 2008 | RCA 32V420T 32" TV

1 Answer

No pic no sound


loosen solderd part connot be seen.. you have to test and reheat the board.. this will take time but this is the best solution...after reheating the board then find no result i suspected to check the H.out somewhere near the flyback.....gud luck!!

Mar 10, 2007 | Sylvania SRT2420P TV

Not finding what you are looking for?
Sylvania SRT2420P TV Logo

311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

matt martin
matt martin

Level 3 Expert

1230 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sylvania Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...