Question about Televison & Video
I have an omnitech remote and i need the code for my symphonic Tv please help
Need code to progam symphonic tv to omnitech giant remote model 15331
Posted on Dec 28, 2014
SOURCE: Symphonic T.V.
Here is the link for all Codes
and the Manual for instructions
Posted on Jan 10, 2008
dont know if you have found a sloution yet but in the event that you are still trying here you go:
Press the code search button, then press the button corresponding to the type of device you are trying to program (TV) then press the power button. Now sit back, grab a book and wait. It may be a while. Took mine like 10 minutes. This may not be the best universal remote but it sure is one of the most entertaining, gets a good laugh everytime.
Posted on Jan 16, 2008
SOURCE: Giant Omnitech remote codes
You can find the remote control codes for different brands
of devices from
If none of the codes work then we have two other solutions:
1. Searching For Your Code
If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
2. Learn the buttons from the original
Line up your original remote and the head-to-head before completing the following steps.
Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned
More help for programming your remote can be found here:
Hope that helps!
If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.
P.S. - You can rate a solution with one of four ratings as explained under (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).
Posted on May 05, 2008
I have a Symphonic also and I was able to program it to watch TV using the dfirections on teh inside of the battery door. Try it! I can't get VCR to work though.
Posted on Jul 28, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Press the "On" button on the symphonic TV to turn that set on.
Hold down the TV button on the symphonic remote until all of the buttons on that remote flash.
Type in 0053 code for the symphonic TV remote as you point the remote toward the TV.
Press either the "Power" or "Pound" ("#") button on the symphonic remote to save the code
Jun 11, 2011 | Televison & Video
Jul 13, 2010 | Philips Televison & Video
Jul 21, 2009 | Televison & Video
Jun 24, 2009 | One For All URC-3021 Remote Control
Dec 19, 2008 | One For All URC4110 Remote Control
Jan 02, 2008 | Big Button TV Universal Remote
Dec 13, 2007 | Televison & Video
104 people viewed this question
Usually answered in minutes!