Question about Televison & Video

4 Answers

Q- will LCD HD TV work with new digital signal coming if Feb 09 - via aeriel in my RV

I posted more detail nov 6 - and am not a paying user of this service

Posted by on

  • ken0803 Nov 11, 2008

    now i am a paying user - hope that brings me some help

    ken

  • ken0803 Nov 18, 2008

    no use at all - expert must have read the problem

×

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 196 Answers

Although, many of the TVs in U.S. households may not be able to display HDTV or DTV signals, external set-top boxes are available now (and will be at reasonable cost in the future) that will enable older TVs to still be used. The set-top box simply converts in incoming DTV/HDTV signal to an Analog TV signal that can be hooked up to any TV. Of course, you won't get any of the increased resolution of DTV or HDTV and all widescreen programming will show up as letterboxed on your analog set, however, it does extend usefulness of an older, but still perfectly functioning TV. 

Posted on Nov 11, 2008

  • 1 more comment 
  • mmechanics Nov 11, 2008

    With the new digital TV
    mandate coming in 2009
    , there's a lot of confusion about what that means for
    your current TV. over at HomeTheater.About.com has a nice FAQ
    that discusses how the digital TV rule affects you:



  • mmechanics Nov 11, 2008

    The original target date for full implementation of digital and HDTV was to
    occur in 2006, however, that will not happen, if present trends continue, that
    the total conversion process may be delayed until as late as 2009 before the
    last analog TV signal is shut off.
    Many of you are under the impression that when the turnover to total Digital
    TV Broadcasting occurs that all current TVs will be "obsolete". 

    h1 = document.getElementById("title").getElementsByTagName("h1")[0];h1.innerHTML = widont(h1.innerHTML);


  • mmechanics Nov 11, 2008

    also check out this link for more better help


    http://hometheater.about.com/cs/beforeyo...



    thanks.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 347 Answers

Ken083,

I am not sure if i undertand what you mean on your previous posts. Are you taklking about a PC monitor or a TV screen? And could you please describe again your peoblem¿

Posted on Nov 11, 2008

  • Santiago Vallejo
    Santiago Vallejo Nov 18, 2008

    Hello Sofe, 

    Change the cable that connect your screen with the power socket.

    Before buying a newpower cable, see if your PC has the same cable to connect to the power socket, and just swap the cables to check your screen.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Could you please describe your query in detail please?

Posted on Nov 11, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,847 Answers

Can you explain the issue in detail?

Posted on Nov 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I tune my remote control to my xenius TV


xenius tv remote code - Technical - Digital Spy Forums

forums.digitalspy.co.uk/showthread.php?t=492951

Digital Spy
Nov 30, 2006 - 24 posts - ‎12 authors
hi all, found this site trying to sort my new tv out. i am trying to set the code on my skyremote to control the volume etc on my xenius tv, but i cant ... Vestel remote control question (TOO versatile ...
6 posts
Sep 2, 2010
TV stuck in standby mode. - TV and Home Entertainment ...
11 posts
Feb 9, 2010
More results from forums.digitalspy.co.uk

Xenius LCDX37WHD88 - Who Makes This TV & Wheres The Customer ...

www.avforums.com > ... > Televisions > LCD & LED LCD TVs
Jul 15, 2009 - Hiya, I am having problems locating a picture of the remote control for a... hi my remote has broken for my xenius tv I have bought a universal ...

I cannot programme channels for my xenius 32" lcd - Fixya


Jan 13, 2016 | Televison & Video

1 Answer

Every thing works no gauges working


None of my gauges will work, but my turn signal indicators ...

www.americanautowire.com/.../none-of-my-gauges-will-work-but-my-tu...
None of my gauges will work, but my turn signal indicators, high beam ... As we've discussed previously, anything electrical needs a 12 volt feed and ground to work. ... 09/28/2015 There are a number of new products coming in Nov/Dec this ...

my gauges quit working - CarGurus

www.cargurus.com > Questions > Ford > F-250 Super Duty

CarGurusSep 21, 2013 - my gauges quit working - My odometer, speedometer, fuel, tach, trip, and ... I tried fixing the wire and had the same problem....so I replaced the shift lever and everything is back to ... no gauges will work in dashboard 1 answer.

No dash gauges, but dash lights - Car Forums and Automotive Chat ...

www.automotiveforums.com > ... > Dodge > Caravan ' Voyager
Feb 6, 2010 - The dash lights work fine, so does everything else. The dash gaugesjust don't work. This is something that has been an intermittent problem ...

Dec 05, 2015 | Cars & Trucks

1 Answer

How do to replace a flasher in a 2001 pt cruiser


Signal Flasher Location - PT Cruiser Forum

www.ptcruiserlinks.com > ... > Tech & Performance Forum

Nov 10, 2010 - 10 posts - ‎4 authors
I have installed LED turn signal lamps in my 09 PT. ... Seems the flasher relay location for 2001-2005 is different of the 2006-2010 PTs. Turn signals not working
6 posts
Dec 27, 2011
Replace Multifunction Switch w/fog lamps
10 posts
Jun 27, 2007
PT turn signals (or lack of)
7 posts
Mar 17, 2005
Turn Signals Not Working
10 posts
Jun 20, 2004
More results from www.ptcruiserlinks.com

how to replace the turn signal flasher on a 02 ... - YouTube

? 5:35
https://www.youtube.com/watch?v=ikJHh7OLcXg
Aug 16, 2009 - Uploaded by bguess
HOW TO REPLACE THE TURN SIGNAL FLASHER ON A 02 .....Replacing flasher/turn signal relay on a ...

FLASHER RELAY - 2001 Chrysler PT Cruiser - RepairPal

repairpal.com > ... > Chrysler > PT Cruiser > 2001 Chrysler PT Cruiser
Feb 9, 2011 - FLASHER RELAY on 2001 Chrysler PT Cruiser. WHERE ARE THE TURN AND HASZAD RELAYS LOCATED. by moposse in Des Moines, ...

Nov 26, 2015 | Chrysler 2001 PT Cruiser Limited

1 Answer

I JUST WANT THE CODES FOR CHEVY TRAILBLAZER 2004...


  • Feb 7/11 - P0405
  • Jan 11/11 - P0336 - P0326
  • Dec 28/10 - P0217 - P0218 - P0163 - P0230 - P0231 - P0232
  • Dec 9/10 - Trouble Codes: P0170 - P0173 - P0162 - P0154 - P0142
  • Dec 6/10 - More DTC articles: P0157 - P0158 - P0160 - P0200
  • Nov 30/10 - DTC articles posted: P0505 - P0156
  • Nov 18/10 - More new articles: P0143 - P0144 - P0146 - P0147 - P0152
  • Nov 12/10 - P0120 - Throttle Position Sensor/Switch A Circuit Malfunction
  • Nov 11/10 - ECT Circuit Codes: P0116 - P0117
  • Nov 10/10 - P0111 - IAT Circuit Range/Performance Problem
  • Nov 7/10 - P0110 - Intake Air Temperature Circuit Malfunction
  • Nov 6/10 - P0108 - Manifold Absolute Pressure/Barometric Pressure Circuit High Input
  • Oct 21/10 - P0216 Injection Timing Control Circuit Malfunction
  • Sept 11/10 - Knock Sensor DTCs: P0327 P0332
  • Mar 15/10 - P0607 Control Module Performance Code
  • Mar 4/10 - P0606 PCM Processor Fault DTC
  • Feb 10/10 - New ECT Sensor article
  • Feb 9/10 - P0012 & P0022 - Camshaft Position - Timing Over-Retarded
  • Feb 2/10 - P0115 - Engine Coolantmag-glass_10x10.gif Temperature Circuit Malfunction DTC
  • Jan 19/10 - P0105 - MAP/Barometric Pressure Circuit Malfunction
  • Feb 10, 2011 | 2004 Chevrolet TrailBlazer

    1 Answer

    HD TV not passing the tests offered on network tv


    Which network? Cable? Satellite? Dish or Direct?
    With any of these providers, you should get an ATSC or "digital" signal. If not, the problem would most likely be with the service provider since they are converting the signal for you. The only way that your set would be affected is if you have an "off air" (antenna) signal only. At this point you would need a converter box. If your service provider is providing you with a HD receiver, then you should have no problem recieving HD (as long as your paying for HD). However, keep in mind, digital is NOT HD. If there is an incompatability with your receiver, check with your service provider for a software or hardware upgrade. Also, check with your local TV serviceman to find out if there are any software upgrades (firmware) for your TV. Being three or so years old, it is possible.
    One last thing to check is to see what type of signal you are passing from your providers box to your TV (which type of cable". At a minimum, you need a "component" connection to pass HD content. A "composite" signal is standard definition. Best you can get right now is an HDMI cable. Best "one cable" source for video and audio.
    Good Luck.
    Tim
    Certified TV

    Jan 23, 2009 | Sanyo DP32746 32 in. LCD Television

    1 Answer

    Digital signal hookup and compatability


    the tv will be hd through the dvi port you can purchase a converter at most shops the you plug the hd freview sat and it will work if the tv has freview built in then it will still work when the switch over happens

    Jan 17, 2009 | Hitachi 46F510 46" Projection HDTV

    1 Answer

    High definition box


    if you mean the digital set-top box (freeview) then it connects to the tv via scart just to deliver a signal but the vcr uses ordinary aerial input to record it's programs.. you cannot get a 'HD box' to plug into a tv the tv is either HD ready or it is not

    Oct 29, 2008 | Sylvania 6313CC 13 in. TV/VCR Combo

    1 Answer

    Converting my TV


    Yore in luck if you already watch TV from a cable provider you will not have any problems when "The big Change" comes next February

    Feb 19, 2008 | Televison & Video

    Not finding what you are looking for?
    Televison & Video Logo

    Related Topics:

    20 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    72601 Answers

    Electro Med Services...
    Electro Med Services...

    Level 3 Expert

    6694 Answers

    yadayada
    yadayada

    Level 3 Expert

    70346 Answers

    Are you a Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...