Question about Projection Televisions

2 Answers

Sony kdf50E2010 Rear projection model Tv won't switch on, stanby light blinks 3 times followed by a pause

Posted by on

  • amurphy572 Nov 12, 2008

    Are these the screws in the lamp housing

  • spw44uk May 05, 2009

    i have just been given a kdf50e2010 with the 3 blinkin flashes.  apparently the bulb went on the tv and it has been replaced with the correct lamp.  and since then theyw have been given the 3 flashes.  i have removed and inserted the lamp a few times but still no joy.  i tried my lamp from my own 50e2010 and inserted it in the broken tv.  and im sure the lights blinked 2 times instead of the 3.   so now im lost and confused at what the problem could be

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 320 Answers

3 flashes indicates that the lamp is not seated properly or that the lamp door is not closed properly. Try removing and plugging tne lamp back in, tightening down the holding screws and reclosing and tightening the lamp cover. This should take care of your problem, Please be sure to rate this solution. Thanks!

Posted on Nov 08, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have just had this problem. on my kdf50e2010 i replaced the bulb but got 3 red flashes. there is a cover which goes in after the bulb, make sure this goes in properly and locks in place. it goes in deeper than you think then the outer cover this should fix it if you've put the bulb in properly.<!-- from fixya rte -->

Posted on Aug 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

65" mitsubishi rear projection tv won't turn


IF model number posted is correct and green power light comes on for a few seconds and then goes off:
On front of set press and hold both the Menu and Input (device) buttons at the same time for at least five seconds and release both buttons.

Power light will then blink a two digit error code like 2 blinks, 2 blinks, a pause and repeat it several times.

Let me know what error code is found and I will tell you what it means.

SD TECH
10_10_2011_10_01_13_pm.jpg

Oct 09, 2011 | Mitsubishi WS-65611 65" Rear Projection...

1 Answer

Tv light standby red just keeps blinking after replacing bulb


Hi,
If red light was not blinking before lamp replacement and after that it start blinking 3 times then pause for three seconds and again blink, check lamp cover that has not been fixed on tv or it is not fixed/ seated correctly there.
Lamp cover is first thing that you removed from tv to replace lamp.
Hope these info will help. If red light is blinking other than 3 times, let me know how many times it is blinking along with tv model number written at rear to provide you helpful info.
Thanks.

Jan 27, 2011 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

Sony kp-51ws520 when turned on just has standby light flashing . the rest is all dead, no picture or voice.


Standby flashing light shows that tv got some internal problem. How many times standby light is flashing is info that provide info about what section of tv got problem.
Count standby light blinks and let me know, there would be 3 seconds long pause in blinks so count pause to pause.

Jul 21, 2010 | Sony KP-51WS520 51" Rear Projection...

2 Answers

My Sony KP-46WT500 screen shows the tv image in blue only for a few seconds, then it goes completely blank (as if it were off). Do I need to replace the bulbs?


It is rear projection TV that use 3 picture tubes of red-green-blue to show color picture on tv front screen.
Do you see standby red light blinking when TV shuts off after showing blue image for a while?
If red standby light is blinking, please count it how many times it blinks, there would be 3 seconds pause between blinks so count pause to pause and post it here to find out possible solution.
Thanks.


Dec 22, 2009 | Sony KP-46WT500 46" Rear Projection...

1 Answer

Sony Grand Vega green light blinks on and then blinks red


Please intimate exact model of your Sony TV and also mention how many times red light blinks as there would be pause of 3 seconds in blinks so count pause to pause and let me know to find out problem.
How old is this TV and did you replaced its lamp?
Thanks.

Sep 14, 2009 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

Sony Wega kf-50sx300u 50in lcd projection tv blinking


hello if the top 1 was just blinking i then yes it is the lamp gone but the bottom is blinking as well they may be another problem

shaun

Jul 28, 2009 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

1999 Sony Trinitron TV. We have sound but no picture. Stanby light is flashing?


How many times does the light blink. It should blink a code 1-8 blinks pause a second then blink the code again. Count the blinks then let me know. If it just blinks constantly without pausing. let me know that as well.

Jan 19, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

848 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...