An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has answered 20 questions.
Re: i have siemens modem
In your interenet explorer type 192.168.1.1 username-admin password-admin and make a new connection and change the mode to PPPoE MODE make a new connection in that browser only and restart the modem for changes to take effect. modem has nothing to do with operating system regards
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Drivers are not needed. Just connect your PC to the modem with an ethernet cable. The modem should give the PC an IP address. Open a browser and in the address window type in 192.168.0.1 and you should see the setup screen for the modem.
4100 modem dont have interface and needs broadband connection in your network connection page
4100b modem have an interface and can access interface by the IPADDRESS of 192.168.1.64 and default gateway of 192.168.0.1
by accessing the default gateway using address bar of internet explorer browser it will be easy to configure..
FIREWALL: all AT&T modems firewall are safe and compatible to use to OS that has a built in firewall
I have just set up 4200 with dsl - you may find that you need to reset modem before you can configure. I was told that you need either a grey or yellow cable from your laptop to the modem. I use 10.0.0.138 to access modem. The 4200 I have was from a bigpond a/c - originally configured accordingly. Regards, Richard