Question about Unitech MSR 206-33 (msr206-33) Magnetic Card Reader

1 Answer

Non functioning Hi, I have an msr206 that does not use an external power source, it is power by the keyboard port and connected to my pc via an adaptor to the usb port. I have loaded the driver but I continue to get a Windows error message when I connect the device. (Code 31) and the device continues to be be listed as "Unknown Device." PLEASE HELP!!!!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 115 Answers

The usb adapter may be for a mouse. Allthough they look the same they are not. Their should be an image of a keyboard on the adapter.

Also Check again. A normal MSR206 takes 24v 1Amp. Your Usb cannot put out more then 6 Volts.
I'd question the writer.

Hope this helps some.

Selvol

Posted on Nov 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i connect my pc which is acer aspire 4720z to my LCD TV WHICH is LG22LH20R? if so which port/data cable i have to use??


The LCD TV does not have the software installed on it to integrate with the Pen drive. That is why. Pen drives are meant for input and output of data via computers with USB ports. The pieces of software required to make a computer recognize and interact with a Pen drive (or indeed any other external flash, solid state or hard disk drive based external storage devices) are USB and Storage Device Drivers built-into a computer's Operating System. Your TV does not have such drivers installed on it because it does not have an internal Storage Device to interact with external storage devices.
Your notebook can connect to the LCD TVs VGA Port by connecting a VGA Cable from the Port to the Notebooks own VGA Port -> press and hold the Fn key bottom left of the keyboard -> press the Function key at the top of the keyboard bearing the image of two monitors -> release both keys -> use the TV's remote to select Menu -> Input/Source -> PC.

Nov 15, 2011 | Acer Aspire 4720 Notebook

1 Answer

I cannot connect to my hp dv5220us to the tv through vga. i think the vga driver is not installed . please suggest me which driver am i supposed o download.thank you.


Most laptops have three modes for video:
* output only to internal LCD screen
* output only to external VGA port
* output to both internal and external

Hold down the 'fn' ("function") key on the keyboard, and press one of the twelve 'F' ("function") keys, to "toggle" the video through the above 3 modes of operation, until you get output through the VGA port to the TV.

Also, on the TV, use the "input" or "source" button on the TV's remote control to select the 'VGA' input-port as the signal to be displayed on the TV screen.

Jul 16, 2011 | HP Pavilion Dv5220us Notebook

3 Answers

NO VGA DISPLAY TOSHIBA SATELLITE M300 FOR VISTA


Hi What precisely do you mean by VGA display, is your laptop not displaying anything on lcd screen,or its having problem giving display on an external monitor connected via a vga port.
if there is no display on the laptop LCD screen, then turn the laptop on and observe for beeps sounds and hard disk spinning sound if still no display is available plug the laptop to external monitor and again restart the laptop. if there is no display on the external screen and laptop is displaying well in LCD, Then most probably you need to press some keyboard combination on laptop keyboard eg: Fn + f4 , refer to your laptop manual also.

Mar 21, 2011 | Computers & Internet

1 Answer

Acer 5515 on external monitor


Get an VGA cable and connect your external monitor to your laptop via a VGA port that is usually used for digital projectors. In this VGA port, you can initiate dual monitors.

Then look at your keyboard and look an icon in your function keys (F1 to F12) that looks like a pair of an LCD and a TV like this {LCD icon/ TV icon}. In most laptop keyboards, this is located in F4.

When found, and with the external monitor hooked to the laptop via VGA port using a VGA cable, press and hold down the FN key and press the function key where the icons described above is located. Example, FN + F4 to toggle a single and a dual monitor.

Give it a try.

Jun 26, 2010 | Computers & Internet

2 Answers

When connects to power in the car, it thinks it is connecting to the computer.


ef110f3.jpg
if your charger not original garmin you should make this modification on mini usb port. tested works with non original chargers (min 500mA).

Nov 14, 2009 | Garmin nuvi 260W GPS Receiver

1 Answer

E-SATA connection


it should work but you will need an external power source

Sep 20, 2009 | Acer Aspire 6930-6455 Notebook PC

3 Answers

External HD not recognizing USB ports as being Hi-speed ports


I have the same issue. I have 4 Simpletech Signature 250GB drives. They all worked fine at first. After about six months two of them started connecting at USB 1 speeds. It occurs on 4 different computers!!! The post about it being the computer assumes is wrong. How can it work fine for six months and then suddenly change. Also it occurs on different computers. I have submitted a tech support request with simpletech and will post the results.

Jun 14, 2009 | SimpleTech Signature Mini 160GB External...

1 Answer

Msr 206


go to : control panel / switch to classic view / double click system / in the system propeties click hardware tab then device manager / scroll down to your device and see if there is a yellow ! next to it , if there is then there is something wrong
does it have this yellow ! ? was it working before or is this the first use? have you set the port for your device?

Nov 07, 2008 | Computers & Internet

4 Answers

Accessing data of a "dead" computer


The easiest is to connect a standard CRT monitor to the external video port. Enable this from the laptop using the function key. One of the functions keys should have what looks like the outline of a standard monitor on it. Using the CTRL key and that function key will turn on that video port.
Dan

May 12, 2008 | IBM ThinkPad G40 2388 Notebook

1 Answer

Keyboard problem


It may be easier to do so, and you won't lose any saved work on installed programmes and updates installed since you inserted the keyboard. You could try re installing the keyboard and touch pad drivers and if no change carry out the above.

Mar 05, 2007 | Acer Aspire 1362LCi PC Notebook

Not finding what you are looking for?
Unitech MSR 206-33 (msr206-33) Magnetic Card Reader Logo

Related Topics:

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Unitech Televison & Video Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Szymon Goscinski
Szymon Goscinski

Level 2 Expert

26 Answers

Are you an Unitech Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...