Question about Lexmark Optra T610 Laser Printer

1 Answer

Optra T610 Print Problem

Right side of the page doesn't print. My margins are set at one inch each, but four spaces are missing from right-hand side. Then if I move the margin in on the right, everything prints correctly. The work I do, though, has to have an inch margin. Any suggestions?

Thanks,
Sarrah

Posted by on

  • r_v_d_182 Nov 29, 2008

    same thing happens with my printer at work i also get error load mp feeder plain letters

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Your paper size settings for Tray 1 is probably wrong. Make sure it is set to Letter and the type is Plain Paper. If your Paper size is Universal, then either the paper guide in the tray is set wrong or the paper size sensor is broken. If the sensor is broken, you can disable auto paper size sensing so the printer will allow you to specify a paper size. To disable paper size sensing, you need to go into Config Mode. The other way is to send a PJL command to the printer to disable the function.

Posted on Feb 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to print a booklet 2 pages per sheet double sided. Printing is OK but spacing is no good for the binding when the pages are cut in two. What instructions should I give the printer to allow...


Hi

By spacing, I assume you mean the margins at the centre.

The default margin settings are not the same for the right and left hand side of the page, so the printing on the reverse side is offset from the printing on the first side.

The right margin is always wider to allow for punch holes in file paper.

It is not the printer settings you need to adjust, it is the page layout of your word processing software.

Adjust the margin settings manually. In MS Office 2007:

Page Layout > Margins > Mirrored Margins.

Hope this helps.

Aug 24, 2011 | Canon PIXMA MP610 InkJet Printer

1 Answer

My printer -X1185 prints the page with a 3 inch blank area on the left side and some of the right side printing is off the page. This is typical in my e mail page, and even if I center the letter on...


Web site designers create Web pages for display on a monitor, not for users to print on 8.5- x 11-inch pieces of paper. This becomes obvious the first time you try to print a Web page. Content you need may get chopped off by the right printer margin, whereas content you don’t need, such as the site’s copyright information, will print on its own sheet of paper. Fortunately, you can avoid such problems with a little foresight.

Before printing any Web page, open Internet Explorer’s File menu and select Print Preview. The current Web page will appear on-screen exactly as it will print on paper. Scan the preview carefully. If it appears that some content is chopped off by the right margin, click the Page Setup button located directly to the right of the Print button in the upper-left corner of the Print Preview window. In the resulting Page Setup dialog box, adjust the left and right margins so that each is set to 0.25 inches. The extra inch of space you gain by resetting the margins should provide just enough room to accommodate all of the content on most sites. Click OK to save the changes and return to the Print Preview window.

Next, scan the preview to determine which pages contain the content you want to print. Take note of those pages and click the Print button in the upper-left corner of the Print Preview window. Locate the Print Range heading and select the Pages option. Type the number of the first page you want to print in the From field and type the number of the last page you want to print in the To field. For instance, if you want to print just the first three pages of a Web page’s content, type 1 in the From field and type 3 in the To field. If your browser doesn’t have To and From fields, type the range of pages (such as 1-3) in the corresponding field. Make sure your printer has paper and click Print.

May 04, 2008 | Printers & Copiers

1 Answer

How do I change margin setrtings foe Lexmark P4350


If you are preparing to print a document that you have created in Microsoft Word, you may be concerned that all the text on the page will print exactly as you see it on your screen. This is not always the case. You can adjust your print margins to ensure that your text prints on each page exactly the way you would like it to appear.

Opening Your Document
Open your Microsoft Word document by double-clicking the Word icon on your desktop. If you do not see the icon on your desktop, then you can locate it where it is buried on your "Start" menu. Click "Start," followed by "All Programs." Then click "Microsoft Office," followed by "Microsoft Office Word." A new document will open on your screen. Click the "Office Button," followed by "Open." Scroll through the files listed, and double-click the one you would like to print. It will open on your screen.

Check Your Margins
By default, your page margins are set to 1-inch margins on the top, bottom, right and left of your page. You can check your margins or change them by clicking "Page Layout," followed by the "Margins" button.

Select New Margins
Select a different margin size, such as "Narrow," which indicate 1/2-inch margins, or "Wide," which indicate one-inch margins on the top and bottom and two-inch margins on the left and right. You also can select "Moderate," which indicate one-inch margins on the top and bottom and 3/4-inch margins on the left and right. Finally, you can select "Mirrored," which indicates one-inch margins for the top, bottom and outside. The inside margins are set at 1 1/4 inches.

Print Your Page
Print your page. Press "Control" plus the "P" button. The printer dialog menu will come up. Make sure that "All Pages in Range" is selected. Press "OK." If your printer cannot print your new margins, then a new menu will pop up telling you to adjust your margins.

I hope you find it very helpful. Best regards.

Aug 22, 2011 | Lexmark P4350 All-In-One InkJet Printer

1 Answer

I keep getting a 1+ inch margin on the right hand side of the page. It has never done this in the past.how can i correct this


Before you print, go to print preferences and make sure the margins are set correctly. They're usually set to default at 1.25 for both left and right and 1" for top and bottom gutter set to 0" and gutter position is set to left.

Hope this helps

Dec 19, 2010 | Epson Stylus Photo R320 InkJet Printer

1 Answer

What are the steps to take a test print page on lexmark T610 optra


go to the printer and faxes right click the printer and go to properties and click on the tes page

Apr 29, 2010 | Lexmark Optra T610 Laser Printer

2 Answers

Incomplete Printing


It depends on the page you are trying to print. Some pages do not like printing everything on the page. What I have done is printed to PDF (with images) and then printed the PDF. You can find free PDF printers here:
http://www.google.com/search?hl=en&q=pdf+printer&aq=f&oq=&aqi=g%3Ap1g9

Jul 12, 2009 | Printers & Copiers

1 Answer

Our lexmark Optra T610 laser printer keeps telling me to "change tray one to plain paper"


verify paper tray is set for correct paper. print the configuration menu and check the paper size for tray 1. If it does not have right size, examine the tray bottom to see if slider is in place

Feb 03, 2009 | Lexmark Optra T610 Laser Printer

1 Answer

Always prints more to left than established margin


Check you Page Setup andmargin set. Sounds like the page isn't set up properly. When you typing a document, go to the FILE then PAGE SETUP. Margins and Paper Layout.
Hope this helps. Bud

Jan 08, 2009 | Lexmark Optra T610 Laser Printer

1 Answer

Not printing whole page


Could be as simply as the right print margin in the application you are using. Try printing a test page by right-clicking on the printer in Printers and Faxes in Control Panel and select Properties. If the test page prints ok then check the margins in the application you are using - usually File>Page Setup. The right margin could be set to 5.0 in instead of 0.5 in.

Dec 15, 2008 | Lexmark X2600 InkJet Printer

1 Answer

Optra S 1625 - not printing an inch on the right side of paper


CHECK THE PAPER WIDTH SETTINGS IN YOUR PRINTER SETTINGS ON YOUR PC OR YOUR PAGE SETTINGS TO SEE IF THERE IS A NON STANDARD PAGE SET UP

Oct 18, 2007 | Lexmark Optra S 1625 Laser Printer

Not finding what you are looking for?
Lexmark Optra T610 Laser Printer Logo

563 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...