Question about Maytag Neptune MDG5500AW Gas Dryer

1 Answer

Neptune Gas Dryer MDG5500AW Display not working

At first the dispaly was frozen with 62 minutes and sart/pause button flashing. I could not push anything. I took apart and ran diagnostic code got an 8 which means stuck key. Tried to clear the diagnotic codes would not let me. Then would intermittenly swich to 18 and wrinkle release would be depressed. Now wont power up at all. Tried unpluging for 10 minutes to reset CPU still nothing.
Any ideas
Thanks
Dan

Posted by on

  • snakeoff
    snakeoff Nov 07, 2008

    Yes thanks now how do you fix it.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 324 Answers

Stuck keypad.

Posted on Nov 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dryer won't run, control panel lit, start/pause light flashing green, none of the buttons work. Checked door switch & both thermal fuses, all okay. Was thinking it was control panel, purchased and...


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Aug 13, 2011 | Maytag Neptune MDG5500AW Gas Dryer

1 Answer

Had a solution posted on here from zx2fast. using a paper clip on the diagnostic block?!. the srvice engine light did flash pause flash flash long pause-but no number codes came up. it just repeated it...


You have to count the flashes. It repeats each code three times. Those flashes are the number codes. All of the codes are two digits. One flash is '1', then short pause and two flashes would be '2'. Since the codes are two digits that is a code '12' and it repeats that code two more times and then starts with the next stored code. It always starts with a code '12' to let you know it is in diagnostic mode and the last code is always '12' to let you know it is done flashing codes.

Jan 05, 2011 | 1991 Chevrolet S-10 Blazer

1 Answer

My Maytag Neptune MDG5500AW Gas Dryer heats up for a few minutes then stops heating. any ideas? thanks!


This is usually the dryer coils have failed. They tend to fail as they heat up. They are inexpensive and easy to replace. Here is a video on replacing the dryer coils.
You will also find videos of disassembling most style dryers at the same site.

Nov 15, 2010 | Maytag Neptune MDG5500AW Gas Dryer

1 Answer

The start/pause, off and signal buttons are not working. The other buttons are functional. Is this a fuse issue?


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Sep 28, 2010 | Maytag Neptune MDG5500AW Gas Dryer

1 Answer

How do I program my clock on my 2001 Yamaha Roadstar 1600?


View the service manual at this URL : http://www.scribd.com/doc/17625151/servicemanual1602082008 : and scroll down to printed page 3-62 or electronic page 120.

Copying from that page:
1. Turn the main [ignition] switch to "ON".
2. Press both left and right buttons simultaneously [i.e., the 2 buttons below the speedometer glass] until both hours and minutes flash
3. Push the left [mode] button and the hour display will flash
4. Push the right [right] button to change the hours.
5. Push the left button and the minute display will flash.
6. Push the right button to change the minutes.
7. Push the left button and both hours and minutes will flash.
8. Push the right button for two seconds to set the clock.

Sep 01, 2010 | 2002 Yamaha Road Star

1 Answer

My Maytag Neptune dryer flashes an 88 when I push the start button, there is nothing in the manual about solution codes


lack of power did you recently have a brown out or power outage that may have messed up the breaker in the fuse box box

Aug 18, 2010 | Maytag Neptune MDG5500AW Gas Dryer

1 Answer

Mitsubishi projection tv picture and sound turn off but the power button remains on with no picture or sound turn tv off real quick and then back on and works for 2 mins then turns off again what could be...


Here's the basic troubleshooting:

  1. Make sure that no front panel buttons are inadvertently stuck in an "engaged" position.
  2. Disconnect ALL devices from the TV.
  3. Press the SYSTEM RESET button and hold for 10 seconds. Proceed if the problem still exist.
  4. Press and hold POWER and MENU buttons simultaneously for 20 seconds. Proceed if the problem still exist.
  5. Unplug the TV from it's power source for various times, ranging between 5 minutes and 24 hours.
  6. If it still shuts down, press the DEVICE and MENU buttons on the front panel simultaneously and hold it for 5 seconds to activate the Error Code Operational Check. The status LED indicator will then flash denoting a two digit code.
  7. Count the number of flashes then pauses for about a half second then flashes again. The first number of flashes indicates the first digit of the error code and the second number of flashes indicates the second digit of the code. For example, if the error code is "35", the LED will flash 3 times, pauses, then flashes 5 times. The error code is repeated a total of 5 times.
Please let me know the code you got and I'll tell where the problem lies and how to fix it.

Dec 01, 2009 | Mitsubishi WD-62525 62" Rear Projection...

Not finding what you are looking for?
Maytag Neptune MDG5500AW Gas Dryer Logo

Related Topics:

409 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

74115 Answers

Are you a Maytag Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...