Question about NorStar T7316E Corded Phone
We do not have a manual and I cannot see where to activate callerid (to display BEFORE you answer - some phones in the office do this, but mine only shows after I puck up or the call is transfered to vm...
The line must appear and ring for the caller ID information to pass to the extension before you pick up.
IF you are fmiliar with programming:
Assuming you have a later release MICS or CICS:
Press Feature ** 266344, then the installer password.
Press Show at Terminals and Sets, enter ext #.
Press Show until you are asked for the line number, then scan through the line appearances, and change to "Appear Only" on the lines you don't want to ring at that set.
Repeat for each extension you want to change.
IF YOU ARE NOT FAMILIAR WITH PROGRAMMING, call in a vendor as you can mess up your system
Posted on Nov 19, 2008
Tips for a great answer:
Jul 08, 2011 | GE 25861GE3 Twin Cordless Phone
Jun 28, 2011 | Innovage 1502084 Corded Phone
Aug 31, 2009 | Uniden DECT 6.0 Cordless Phone ID
Aug 30, 2009 | Uniden DECT 6.0 Cordless Phone ID
Jan 22, 2009 | Panasonic KX-TG9331T Cordless Phone
Jan 02, 2009 | Panasonic KX-TG1033S Cordless Phone
Oct 24, 2008 | Panasonic KX-TG9331T Cordless Phone
Aug 19, 2008 | Phones
Mar 14, 2007 | Siemens Gigaset 2415 Cordless Phone
Sep 26, 2016 | NorStar T7316E Corded Phone
Jun 15, 2015 | NorStar T7316E Corded Phone
386 people viewed this question
Usually answered in minutes!